Island Range Hood Installation. Video 3. Вытяжка над плитой в потолке
Vložit
- čas přidán 10. 09. 2024
- Part 31. Cook Top Island Mount Range Hood Installation. Kitchen remodel for IKEA cabinets. Cosmo 36 in. Ducted Island Range Hood in Stainless Steel with LED Lighting thd.co/2UMoqiT
1) 28. Island Mount Range Hood installation • Island Mount Range Hoo...
2) 29. Hood Duct pipe and Electric Outlet installation • Range Hood Duct pipe a...
2A) 30. Recessed Light Housing for LED • Recessed Light Housing...
3) 31. Island Range Hood Installation • Island Range Hood Inst...
4) 32. Range Hood Reinstall Higher • Range Hood Reinstall H...
Установка вытяжки в потолке над плитой, 4я часть. Кухня Икеа, Айкия. 03.13.2020.
Island Hood Installation,
IKEA kitchen installation,
Установка кухни ИКЕА,
Instalación de cocina IKEA,
تركيب مطبخ ايكيا,
การติดตั้งห้องครัว IKEA,
IKEA keukeninstallatie,
Instalação de cozinha IKEA,
イケアのキッチン設置,
Installazione della cucina IKEA,
Installation de cuisine IKEA,
IKEA სამზარეულოს მონტაჟი,
IKEA Kücheninstallation,
ايڪس ايڪسين کي بيسائڻ جي تنصيب,
IKEA oshxonasini o'rnatish,
आयकेईए स्वयंपाकघर स्थापना,
IKEA ਰਸੋਈ ਦੀ ਇੰਸਟਾਲੇਸ਼ਨ,
IKEA 부엌 설치,
IKEA асүйін орнату,
IKEA kökinstallation,
Вытяжка над плитой,
Range Hood,
#kitchen, #howto, #diy
I am getting this same hood installed today. Glad I found this video. Awesome work you did 👍
@@aarun3000 Nice to hear that was helpful 🙂
I have to say thank you so much for this video, im about to install the same vent in my kitchen next week and wasnt sure about the cutting metal part. Now i have a good idea of what to do. Thanks again greetings from Houston,Tx
Glad I could help!
Here is all Island Range parts:
1) 28. Island Mount Range Hood installation czcams.com/video/XNl1r2538yA/video.html
2) 29. Hood Duct pipe and Electric Outlet installation czcams.com/video/0IDhl8vfP80/video.html
2A) 30. Recessed Light Housing for LED czcams.com/video/yj5pJXq_XtE/video.html
3) 31. Island Range Hood Installation czcams.com/video/WgI0EnnLrMk/video.html
4) 32. Range Hood Reinstall Higher czcams.com/video/JDOnix5G_K4/video.html
Thank you & I will take a look...the email it's on it's way.
Mr. Man with the plan!
Awesome work dude
Thanks!
Thanks man, your video helped alot, I didn’t have to cut the chimney cover thank god lol
Great Job!👍🏻
You made it look so easy.. lol
Thank you! Cheers!
Great job just installed this had to also cut it to fit. The only thing that upset me was that blue film over everything
Film was removed after final inspection.
Nice, you do it very well and by you're self
Thank you very much!
Thank you for this video. We are following it right now :D
Wow, awesome work!
Thank you! Cheers!
Nice job there Sir 👍
Thanks for the visit
Thank you for video. Interesting that you cannot use all 16 screw mounts because of the design of the housing. We do not have a tall ceiling in our Kitchen and I was baffled about how to install using all of the screw holes…
All screws hole made for your own situation and optional. Customize whatever it fit to your needs by the ceiling height.
Hire is all part of this installation:
1) 28. Island Mount Range Hood installation czcams.com/video/XNl1r2538yA/video.html
2) 29. Hood Duct pipe and Electric Outlet installation czcams.com/video/0IDhl8vfP80/video.html
2A) 30. Recessed Light Housing for LED czcams.com/video/yj5pJXq_XtE/video.html
3) 31. Island Range Hood Installation czcams.com/video/WgI0EnnLrMk/video.html
4) 32. Range Hood Reinstall Higher czcams.com/video/JDOnix5G_K4/video.html
Awesome detailed video!!
Thank you 😊
Thanks , that was perfect.
Glad you liked it!
Great job! Tulsa, Ok
Thank you! Glad you like it!
Классное видео...после всех видео на канале не знаю что же будет в следующем...
Есть ещё что менять на этой кухне и устанавливать.
DOH! That last cabinet door! I wonder, could you leave the glass off?
Without glass less air ventilation out.
Thanks. Good video.
Glad you liked it!
GRACIAS AMIGO!!
Thanks!
Thank you sir.
Most welcome!
Could I only use 12" of one of the housing pieces? I have a 7ft ceiling and not much space to work with. Thank you for the video.
Whatever makes it looking good and finished.
@@FixitAll Okay thank you. Ran into an issue today installing Awoco flush mount. The blower for it was way too big for the soffit. I'm going to order the one you installed and only use one of the pieces and cut it down to 12". Thank you again!
Why do you go to all that trouble and then use flexible venting? That’s not what you’re supposed to use. You’re supposed to use straight duct. Grease and moisture can get trapped in there. It also creates more noise. Otherwise very interesting video.
If you watching this installation from previous part, i am not open the full ceiling to get space for use straight duct. Only two hole 6" from both side and there is no way to metal duct, only flex.
From my 24 years experience, i have never saw or hearing some complain from customers about flex duct in a kitchen.
Never use Flex Duct !! Venting is reduced by over 50% just by using Flex Duct. Use rigid vent
How can you raise the range hood? I have a similar one and I hit my head every time I am cooking
I think they didn't center it properly. So it's coming too far out. I can't change that. But if I could raise it a few inches. That would make it easier on my head. Lol. Thx !
Check out this reinstallation higher in part 4.
1) 28. Island Mount Range Hood installation czcams.com/video/XNl1r2538yA/video.html
2) 29. Hood Duct pipe and Electric Outlet installation czcams.com/video/0IDhl8vfP80/video.html
2A) 30. Recessed Light Housing for LED czcams.com/video/yj5pJXq_XtE/video.html
3) 31. Island Range Hood Installation czcams.com/video/WgI0EnnLrMk/video.html
4) 32. Range Hood Reinstall Higher czcams.com/video/JDOnix5G_K4/video.html
Hello,
Like you, I have no way to attach my range hood's motor housing using the upper mounting screws which are blocked by the chimney cover. I am hoping that using the lower mounting screws only will provide sufficient protection from vibration and adequate holding power.
Thanks for your video! It was all I needed. Question: What about using only 8 screws (not 16) to fix range hood to angles? How it results?
More screws, more chance not to loose all parts after years of vibration.
Thanks again!
I'm here up in the same problem not able to get to 16 screws I can't even use one chimney and get 16 screws
great cut job on the SS hood chimney. This is harder to do than it looks. Hung my Elica via a non-vented soffet box (unvented Attic space). Need to re-foam the roof, hoping that will reduce the condensation on the interior of the Hood when not in use. This is from warm pipe air, cold A/C air in room space. The roof cap damper operates but they never completely seal. Thinking about adding a Backdraft damper at the Inside/Attic space interface. Any ideas?
I can't say anything about extra damper. Never had to deal with it.
Thank you
You're welcome
How do you make sure it exactly on the stove and straight
czcams.com/video/XNl1r2538yA/video.html
Here is all Island Range parts:
1) 28. Island Mount Range Hood installation czcams.com/video/XNl1r2538yA/video.html
2) 29. Hood Duct pipe and Electric Outlet installation czcams.com/video/0IDhl8vfP80/video.html
3) 30. Recessed Light Housing for LED czcams.com/video/yj5pJXq_XtE/video.html
4) 31. Island Range Hood Installation czcams.com/video/WgI0EnnLrMk/video.html
5) 32. Range Hood Reinstall Higher czcams.com/video/JDOnix5G_K4/video.html
Aren't you concerned about flexible dryer duct used for a Range Hood? Code here is rigid metal ducting.
I know, but there is no way to use metal duct when sheetrock on ceiling.
Very nice well done! I have the exact one. The piece that you first started with is it called the shaft? I do have a question on that piece. Yours looks like it doesn't have the screws positioned like mine. Mine look like that's an opening of the shaft area 🤔 I have 12 screws all together on 6 each side all 3 on top & 3 bottom & I want to open that area to clean some dust particles that are in there, with a mini vacuum hose. Would that be possible do? Or should I leave it alone? The dust particles actually came into it from ac vents. It was a lot well enough. My hose tiny but not tiny enough to through the vents on the side of shaft. Or suggestions? Thank you! Once again well done!
Hard to answer without pictures.
Send me that to my email:
vasily-fixitall@hotmail.com
@@FixitAll thank you I sure will! just give me a few to take the pics.
Thnaks
И это 3й день!
I have same and I need to remove only the glass oval top . I removed 4 bolts but can't get glass to separate. sugestions?
As you can see here czcams.com/video/XNl1r2538yA/video.html the glass was preinstalled by the factory.
From other videos about the glass, it should be removed just with 4 screw.
Hey, just back to home from my customers, and I was curious how my hood glass seat there.
I removed 2 screws from left side to check if the glass not glued or stick somehow to stainless steel.
So you know, nothing to hold it. I easily lift glass up 1/4" from the left side.
So I'm sure if I remove two other screws I will be able to lift the glass.
Just to be clear, for this manipulation need completely take down to the floor hood and lift it through the pipe up.
How do you change the light bulbs?
All works, so have no idea for now.
Google - Change bulb in Cosmo Ducted Island Range Hood
czcams.com/video/fZmSHDlkWsk/video.html
What did you do to remove the film efficiently?
Just by hand, no any liquid or chemicals. Only one thing can help to remove sticky films, retail stores labels, price tags - hot air by hair dryer or heat gun (on low temperature).
The ceiling must be nice and flat for the cabinets to be so close. Looks great!
The installation was done very well. I wanted to know what you did about the outside vent.
Let me find a video and upload it.
@@FixitAll okay 👍
Thanks for the video, we are getting ready to install the same range hood. One question though, why do did you cut a little portion on both ends?
Cut or not cut that's really depend on how low will be glass of the fan and how high the ceiling. My ceiling just 93" and when i start to use a factory length 0:09 I can't see the screws under cover and cant use screwdriver to them.
The firs was cut off to get space for screws only - see it at 3:30 and with lift up fan at 8:10.
The second short peace was installed short because if you will use long it will cower side air slots on top of the first cover peace. So the second 3-4" peace need only to cover the screws and not necessary to have it full factory size all the way to the top - see it here 8:18
After couple days we decide lift fan 1" more and I was need to cut off a little more to get the screws again. Part 32. Range Hood Reinstall Higher czcams.com/video/JDOnix5G_K4/video.html
А левый шкаф получается шире чем пара справа? На видео дверцы у всех троих похоже на одинаковые.
Да, левый 18" а правый шкаф на 30" (две по 15).
Can anything be done about the cabinet door hitting the fan assembly? Overall, great installation. I like your dog 🐕.
Second door 15" and it pass the glass 1/4". But first cabinet door 18" that's why it hitting glass. If i move the hood 3" more (for 18" door) it will be 3" of the center between ceiling light and 3" to the left from cooktop surface. So 3" off will looks not good and strange.
I will make a door stopper for the 18" door and it will protect from any dent/scratch.
The installation instructions says different
Instruction for those people who don't know how to do without instruction.
Mui bueno me gustaría aser una compañía de intalacion
Красотища,слов нет,да и в одного крепить не фонтан. Дверцами не побьют?
Одна дверь сейчас под угрозой если распахивать неосторожно. Но я поставлю ограничитель и всё будет впорядке.
Pero no mostraste como lo cojiste del techo
Estás viendo la parte 3. Todos los episodios están en la descripción. También hay comentarios en anclados.
Here is all Island Range parts:
1) 28. Island Mount Range Hood installation czcams.com/video/XNl1r2538yA/video.html
2) 29. Hood Duct pipe and Electric Outlet installation czcams.com/video/0IDhl8vfP80/video.html
3) 30. Recessed Light Housing for LED czcams.com/video/yj5pJXq_XtE/video.html
4) 31. Island Range Hood Installation czcams.com/video/WgI0EnnLrMk/video.html
5) 32. Range Hood Reinstall Higher czcams.com/video/JDOnix5G_K4/video.html
Never use Flex Duct !! Venting is reduced by over 50% just by using Flex Duct. Use rigid vent
You right. But in some case no way to insert duct pipe, unless customers ready to pay a thousand extra for just a piping, to open the ceiling and get sheetrock repair and painting whole ceiling.
Bueno
Sorry but, but You skip an important step how to prepare the ceiling.
You can read this is Video 3. Under video in description and in the Pinned comment you can find all 5 part from start to end.
Here is all Island Range parts:
1) 28. Island Mount Range Hood installation czcams.com/video/XNl1r2538yA/video.html
2) 29. Hood Duct pipe and Electric Outlet installation czcams.com/video/0IDhl8vfP80/video.html
2A) 30. Recessed Light Housing for LED czcams.com/video/yj5pJXq_XtE/video.html
3) 31. Island Range Hood Installation czcams.com/video/WgI0EnnLrMk/video.html
4) 32. Range Hood Reinstall Higher czcams.com/video/JDOnix5G_K4/video.html
Zline