FS2020: All My Button Assignments & Sensitivity Settings For The Logitech Flight Yoke System!
Vložit
- čas přidán 2. 08. 2024
- A number of viewers on my other videos have been asking for this video - so here it is!
I swear that I dusted before recording; My Phone Camera picks up every spec & molecule 😲
Join the Discord run and maintained by a few of my Subscribers & Friends:
/ discord
⌚Timestamps⌚
Introduction: (0:00)
Yoke Button Assignments: (0:53)
Throttle Quadrant Assignments: (3:54)
Sensitivity Settings: (7:37)
#MSFS2020 #LogitechFlightYokeSysytemSettings #MSFS2020LogtiechFlightYoke - Hry
I greatly appreciate your easy-paced delivery. So many flight sim tutorials are far too slick and fast and are acting as iif they are in a race.
Super helpful! Did a plug and play with mine, realizing during landing that there was nothing assigned to the brake
Fantastic!!! Glad you're back online!!! You're videos are extremely valuable!!!!
Appreciated thank you
Thanks for doing this video Huddison - much appreciated. For the record, your sensitivity settings work well for me in MSFS 2020 also... ;)
Thanks Peter and that's good to hear - re sensitives ;)
Thank you for your response, to assign on my joy stick key ,under what nane I can find this shortcut to assign please
I just ordered this can’t wait to try it out on the weekend
It really is wonderful to use with MSFS 2020.
@@Huddison ive just had one delivered but the yoke shaft has 15mm up and down movement and you can hear the other end of the shaft bang inside the box is this normal or just shoddy build quality or do i need to send it back ?
Good video and very helpful. Many thanks.
Glad it was helpful, thanks Rich.
I don't know if you have tried the Oculus VR or not in the flight simulator but I highly highly recommend it as long as your PC and graphics card is up to it! Thanks for the vid!
Yes I have: I use it all the time for DCS (especially the Spitfire!); I prefer MSFS in flat screen mode though.
Don´t you get dizzy?
Thank you so much , this was help me a lot :)
You're welcome :)
Thank You sir very much..
I'm enjoying your videos! Any ideas on how to use the different modes on the yoke?
Thanks Peter :) I haven't played with the modes setting, as I find it easier just to create different profiles in MSFS for different button/sensitivity settings etc.
I'll aim to look into this though.
This video just made me realize I didn't need a power cord to use my yoke, thx!
😎
Splendid within the next few months of 2022 hopefully will be building my FS 2020 set up now which yoke etcs hmmmm
update if one is interested the week of the 30th of Jan 2022 should be in the air :)
You are the best! I had bought the flight yoke some time ago and got so frustrated that I set it aside and used the stick. Now I will use the yoke. Thanks!
That's great to hear Albert!
@@Huddison thank you kindly- like Albert above - was excited to get the yoke but my plane was bouncing around like a beachball on the pitch and got frustrated - been trying messing with the settings but haven't found the sweet spot (realize changes by plane) but will try yours in this video to see if reduces the dramatic pitching was experiencing.....
@@grantwood2104 let us know 🤞
good video thanks
You're welcome
Hi Huddison I have just purchased the saitek yoke and throttle quadrent. I find I have a bit of stickiness on the yoke which would appear to be present in a number of the yokes. Have you encountered that problem and if so have you performed the mod using elastic bands. Thanks for a great video.
Hi, my Yoke was very fluid from day one, so I've never felt the need for the elastic bands mod. It's worth trying for yourself, if you feel that your yoke sticks too much.
Hi, and thanks for youre great video!!Its been helping me a lot! I will receive my logitech yoke and the Logitech Flight Multi Panel as well this Wednesday. Do you still use these Button assigments ans sensivity settings as youre prefered configuration?Sorry for my bad english I am french from Québec Canada Thanks!!
Hi and thanks for the comments. Yes, still pretty much all the same button assignments and sensitivities, but do configure them to your own liking.
Hi Huddison, Thank you for these Tutorials, they really help. I just got my Flight Yoke System and did manage to get it installed. Only problem I had was the screws that connect the Throttle and it's Clamp were not in the box. This was solved by a trip to the hardware store. By the way, if anyone else has this happen the size is M4-.70 x 12. They come 12 in a package and I only needed 4, but I have a second USB Throttle coming Tuesday, for multi-engine aircraft, which is mainly what I fly (the Beechcraft Baron being my Favorite). This second Throttle, as I said, is connected to either the Yoke itself or straight to the computer with a USB connector. My question is, do you, or anyone else know any Pros and Cons of either method of installation? I do have another Question. I saw in a previous Vid that you mentioned that the Velcro strips on your Throttle assembly do not come with the unit. My question is what are they for? Do they have a purpose or are they purely Cosmetic? Again, Thanks for the Great Tutorials!
Great to hear that you received your Flight Yoke System and managed to solve the assembly issue.
I personally do not have a 2nd throttle quadrant, so hopefully someone more informed will answer your question on this.
The velcro strips came along with these replacement levers for the throttle quadrant: czcams.com/video/38T03hm48es/video.html
I understand the Velcro now... although they don't really interest me personally, at this time..., I can see where these handles would be great for those interested in jet airliners. Still working on my Sensitity Settings... have tried to take-off & land only twice now but I see this Yoke flying is going to take a bit of time and effort to get used to after using the Thrustmaster Hotas One. I can take-off ok but I cannot seem to pull off a successful landing as yet. Going to keep working at it though... may have to back off the Baron for a while and try something a little easier to control. Anyhow, Thanks for All your Tutorials, they are really helping me to get into Flight Simming!
Hi.. First here.. What do you use as a rudder padle to taxi in land.
Good vid.. Thx
Thanks - I use actual Rudder Pedals.
@@Huddison i saw.. But befgore that.. A saw your otbers vids... Thx for the answer
Hi Huddison! After trying everything to set my Saitek yoke up with MSFS 2020, wonder if u can explain why the left turn and down movements cannot be set up? When the yoke is moved less than a 1/4’ to the left, it shoots immediately to full left! Same with down movement! The Up and right movements work perfectly normal. I have cleared all settings and re-bound to no avail. Thanks for the great channel! Dave C.
Hi Dave, best thing to do, is to jump onto our Discord where you can share pics of your setup & the like: discord.gg/3kra6JfHZT - I'm sure we'll be able to sort this for you.
Good morning just bought this little gem 💎, can you use this to fly a A320 too? Also where did you get your different levers for the throttle controller?
I've used it to fly the A320 (briefly).
Watch this video re throttle levers that I use: czcams.com/video/38T03hm48es/video.html
Thanks for the video. I was watching this on my tablet so the video for the 737 attachments for the throttle did not appear on screen and I was having trouble finding the video on the channel page, if someone could link me the video, I would appreciate it.
No problem: czcams.com/video/38T03hm48es/video.html
Hi Huddison, I'm new to MFS 2020 and waiting for my yoke and throttle quadrant to come (in for a penny in for pound and all that) have you or would you mind please doing setting up flight controls tutorial for both of these like the one you did for logitech attack 3 joystick.
Many thanks.
Hi, the Flight Yoke system is different to the Attack 3, in that pretty much all axis and controls are set up for you, out of the box.
This video, in conjunction with this playlist of mine, should help you fill in an missing links to get it working to your liking: czcams.com/play/PLEIvySbqiwXVvJUF3UcCI99_vzASkuGxI.html
@@Huddison Thank you for the reply and the link will give it a watch now thanks again good sir.
@@troubledshadow13 Most welcome.
So many buttons. I bet you can fly space rocket with so many buttons.
Lol yes and probably by remote control these days 🤣
Does that setup run elite dangerous? Was considering getting it for that and a couple other sims I play.
I've never tried it with ED, but it should work well.
As per the yoke, thanks for your useful hints. I see you have the multipanel attached to the yoke. How did you manage to make it work in MSFS? After many months of trying I think it´s gonna be a waste of money. Logitech told me they still don't have drivers for XP12 either.
All that is required is to install the Driver for the panels; see the description in this video for the link to the driver: czcams.com/video/zYQ-O-0GAQc/video.html
@@Huddison Thks. I don´t have the radio panel. Just the Multipanel (AP, HDG, NAV, IAS...) so the drivers are probably different.
@@roblabbe629 It's an 'all-in-one' file for all the Logitech panels.
Hi Huddison, I was wondering if you remember what you search for in MSFS control options to assign the PTT. I tried PTT, Tran, Radio, microphone... etc. I can't seem to find the command to bind to my joystick or keyboard. Thanks in advance if you're able to address this. Paul
Push To Talk? I have this set as a button in Discord (as that's the voice chat I Use).
@@Huddison Ahh. Thanks for the reply. I'm trying to figure out how to bind a keyboard or joystick button to the push to talk command in MSFS. Maybe it isn't available that way?
How do you get the L -Y Elevator settings to work smoothly both ways? I have tried 2 Logitech Pro Yokes and every time you push forward to descend the plane drops like a rocket and there is no way I could stop it doing so - no matter how much I tried to alter the settings eg the white indicator, once passing the centre of the axis on the way down, flashes to the bottom off the axis??
Hi Keith, it has worked that way for me from day one. Come and show us your settings in Discord & we might be able to help: discord.gg/Ameu93sHfY
How did you make the 737 throttles and speed brake? Asking for a friend 😉
I bought them - czcams.com/video/38T03hm48es/video.html
where can I buy the same nozzles for the throttle control knobs as you have, because those that cost initially are not convenient
See this video: czcams.com/video/38T03hm48es/video.html
My yoke on pitch wont really even register on anything I try in settings. any suggestions? I got this as a gift and haven't been able to use it since December.
Is that the same with all Simulators (X-Plane, FSX, MSFS)? Sounds like it may be faulty :(
The question is how do you assign them ?
Hi Huddison, thanks for your tutorials which are very helpful. I received my Yoke System yesterday (9-9) and used your video to setup my own preferred control settings. This leaves me with two questions. 1: Is it possible to use the levers on the throttle quadrant to assign reverse thrust (if you go down) passed the "click-point"? 2: Can I use the 3-Modes button (right back side) to program different settings for Props and Jets? Thanks in advance for your reply.
Hi Ed, Congratulations on your new flight yoke! Re: reverse throttle: see this other video of mine: czcams.com/video/jgAG4PkyDBc/video.html
Re Mode selector switch: I've not found a good use for this in MSFS (aside from setting it to something like toggle landing brakes); if you want to set up different controls schemes for different aircraft, you are best doing this in the MSFS controls profiles settings - i.e. set up a different profile there, for each aircraft.
@@Huddison Thanks for your reply. (How could I have missed your video about 'reverse thrust'?)
Anyway, looks easy enough to assign key-switches to this command and create separate profiles for Jets. Being Dutch it's sometimes difficult to find the right command.
We seem to have about the same history / experience with Fs. I got hooked with the Polygons of the very first version and have been upgrading since. FS has been a second hobby for me as I'm a Music composer, but it's still great to just soar and enjoy the experience.
If you ever grow tired of flying I'd recommend to start compose music. It's equally satisfying and your not limited in any way.
In Fs "the sky is the limit" Composers go "where no man has gone before".
I wish you happy landings and hope you'll keep creating tutorials. See you around ;-)
@@eds5709 I used to create a few Piano pieces back in my 20's, but lost the passion somewhat, as the years rolled by.
I may just have to re-indulge once again ;)
@@Huddison Back on topic: I noticed you have "Frame Rate Limit" set to 60. As far as I know this limiter has no function. In other words, if you set this to 30 you'll keep the exact amount of FPS but without the "red warning color" in your FPS-counter window. I assume you know you temporarily must activate V-Sync in order to be able to change this value. Have a great weekend ;-)
Hey, I’m pressing C1 and C2 to turn left and right on the ground - rudder trim.. it’s not working? Any ideas?
Rudder Trim? No, you want a Rudder axis to taxi on the ground (move your view down to the rudder pedals to ensure they are moving when you press the associated button etc). If you don't have rudder pedals, an Xbox controller plugged in will let you do this with its trigger buttons. Or use the default keyboard assignments for rudder control.
When I turn on my drone camera it gives me external view of the plane how are you not getting plane external view when you enable your drone camera I assign the button T1 just like your setting The only way I get a drone view if I maneuver the plane completely out of the way until I don’t see the plane can’t figure out what am I doing wrong they are different right external view and drone view
When you first enable drone camera, it looks identical to external view, but behaves very differently (i.e. you can go and wonder in any direction you want to with the drone). The Camera menu at the top of the screen (mouse up), will give you an option to reset your drone view, if you get lost.
Has anyone encounter with a throttle problem where you can no longer use it property
Like it stays on half then as soon as you move it it goes full throttle
I don’t know how to reset it
Someone help pls?
Come join the Discord - discord.gg/3kra6JfHZT - I remember this being discussed and sorted there a couple of times.
Can I get a new link to discord? Your description one is expired, (try making it an infinite link 😉)
I have actually just transferred ownership of the Discord channel to another member there (AcesDwn1).
I will make a community post on this later today and begin removing links on my CZcams channel.
What is the keybind for the flaps
Gosh now your asking - I'll have to make an update video on this.
Can you please explain to me how you got your MPD working?
Now I don't think you're refering to 'Maintenance planning documents' - can you expand on what you would like me to explain?
@@Huddison your multi-flight panel display from Logitech
@@halilhammer7607 Mine's worked from day one. Is yours not working at all?
Could you give your actual MSFS control assignments for your yoke's hat switch left/right/up/down?
i.e. for my Saitek Yoke I have:
left mapped to MSFS's "Cockpit Quickview Left"
right mapped to MSFS's "Cockpit Quickview Right"
and get the same results as you do here but I can't work out what MSFS controls to map to hat up and hat down to get the views you have here ☹️
This video will show you the general way to map your controls - it's pretty much the same for any controller with a hat switch; czcams.com/video/zEZ1k-qCGLk/video.html
@@Huddison I'm perfectly capable of setting up my controls having setup my Saitek X-52 Pro, Saitek Yoke, Rudder Pedals and Xbox controller, it is your SPECIFIC control bindings for the Yoke's hat I would like to know.
E.G. "Toggle Cockpit Landing Mode" which I assume to have mapped to your Hat Up does not work for me, nor does the "Toggle Cockpit Landing Mode (Hold)" binding.
And have you set Hat Down to "Toggle Instrument View 1"? I tried that and I have set Hat Left/Right to the "Cockpit Quickview Left/Right" but when I press Hat Down to go into Instrument View 1, Hat Left/Right do not move to the next/prev instrument view as happens for you in this video.
So all I'm asking is what MSFS controls do you have your hat left/right/up/down bound to, as in their names in MSFS Control Options.
@@TheOneTrueSpLiT My Hat Switch settings for my Logitech Yoke are: Quick view left & right; Up takes the view up over the nose and down takes me to the instrument view.
I'm pretty sure I have one or 2 videos showing this - check this playlist: czcams.com/play/PLEIvySbqiwXUqZDsrtWRYEoTMV2gPHaAU.html
@@Huddison So "the view up over the nose" is a term used in MSFS control binding is it? Please show in a screenshot then. Obviously it is too much effort for you to check the EXACT term in the list of 100s of control bindings in MSFS itself. Don't bother, I'll stick to what I've been using since August 2000.
@@TheOneTrueSpLiT Sheesh seriously Guy, I answer dozens of questions per week (sometimes per day!) - I'm really not obliged to do so you know.
Where’d you get that throttle at
czcams.com/video/38T03hm48es/video.html
Discord link is not in description.... I want people to fly with!
It's there now - enjoy!
This thing doesn't vibrate? I tried stalling and nothing. I have vibration all the way up.
None of the yokes within the £100-400 price range vibrate.
@@Huddison I don't have rudder pedals what buttons would you suggest to use?
@@Tj11813 I used to connect an Xbox 360 controller and use the triggers as rudders.
@@Huddison I'm using the joystick for the rudders now. Works well.
Before buying all that equipment, I would have got a bigger monitor. Or if you can't afford a bigger monitor then a Good HDMI enabled TV.
Bit late now mate
@@Huddison Make that the next upgrade I'd say. Ultrawide is where it is these days.
@@ROBFF-zi3zf Yes, that's my intention
Could you show your settings instead of just saying them please?
Hi I like it a lot I got one my self could u please give me the link to the Boeing 737 levers plz thz
And I don't want it to be lots of money just like what y got
www.cockpitsimparts.co.uk/10-saitek-logitech-levers
Thx man