THIS RELAY TESTER WLL SAVE YOU TIME AND MONEY!
Vložit
- čas přidán 27. 08. 2024
- HEY CHECKOUT THIS AWESOME RELAY TESTER!
amzn.to/3mxK6yX
PLEASE CHECK OUT MY MUST HAVE TOOL AND PARTS LIST FOR ALL YOUR SMALL ENGINE NEEDS www.amazon.com/shop/backwoodsctryboy
YOU CAN VISIT ME ON FACEBOOK
WWW.FACEBOOK.COM/THEMOWERMEDIC1
THE MOWERMEDIC1 25+ YEARS EXP DIAGNOSING AND REPAIRING LAWN EQUIPMENT, GENERATORS, WATER PUMPS AND ALL TERRAIN VEHICLES, HIS GOAL IS TO HELP THE DO IT YOURSELFER PERFORM REPAIRS EASILY THROUGH HIS DETAILED VIDEO TUTORIALS, AS ALWAYS PERFORM ALL REPAIRS AT YOUR OWN RISK, ALWAYS CONSULT A SERVICE MANUAL FOR SPECS AND PROCEDURES, HAVE A GREAT DAY!!
Just keep in back of your mind that there are scenarios where these will pass a bad relay. My snap on has caught (in one instance) a bad relay that tested good in one of these type testers. Now it only happened 1 time but i always remember that 1 time.
I was wondering about that. What snap on tester caught it ?
@muddyriverdogz Snap On RelayTest1. I dont think snap on sells it anymore but i had just looked it up since i couldn't remember the number or name they called it. When i looked it up i seen some available for sale and some were new. Now i did pay alot for mine back in the day but it one of those things where after that scenario i had its been well worth it having that piece of mind.
😊 yup I always Remember that 1😍 that got away 😂
I pickup one last month, works very well, saved me so much time
Now thats simply a must have. Thanks I didnt realize they even made such a device. This is why I watch mm1 always got the hook up on info.
Lol great job! All these years I've been using a volt meter and a jumper. Oh I've got to have one of those!! Thanks MM1 U R the best my friend.
Me 2. Power source and a dvom
@@THEMOWERMEDIC1 yes sir, we old school
Picked one up, and if you're a prime member you get 5% off now.
Excellent. That second relay was very similar to the relay in the early VW Rabbit diesel. It was used as a glow plug relay and they were prone to failure from wetness. Either condensation or in our old Wabbit, a very minor leak through the firewall allowing water to enter the relay because it was positioned in an upside down fuse and relay block under the dash and rain water would follow the wiring harness path. When I replaced it the first time, I took the old one apart to see how it worked. The relay contact point was corroded. Cleaned it with a small file (after I poured out the collected moisture, upside down position making it a cup) and bent the arm just a bit to compensate for the gap. I checked it by reinstalling and it worked fine. I took both the old one and the new one and sealed both with RTV blue. Reinstalled the new one, old one into the glove box. NO MORE WATER INTO THE RELAY, NO MORE PROBLEMS. This relay checker? It's on my list! Thanks for your always great videos!
Thanks buddy. my brother in laws crap honda is giving me problems and my audi flooded the relay case in a storm. This will help me find the relays that are messing up.
I saw that on Amazon and wondered if it was any good. Thanks for sharing!
You are a Genius for Finding this Tool. Thank You so much. It cuts out alot of Confusion with using a Volt/Ohmmeter and trying to Hunt to determine what is the correct or wrong terminals from the Out Side of any Automotive or Lawnmower or HVAC/R Relay. Thanks Again and Keep up the Great work Homie 👍👍👍
Just ordered one , thanks Mower Medic
Great video. I ordered one of these and I have seen your video saying this thing is great and I am so glad I watched yours first...Now I am going to watch the other video that says it is garbage.Great explanation of how a relay works.
What a wonderful tool.. as you say not for mowers cars too.. Many thanks DVD:)
Great tip buddy. I think i will get me one of those relay testors!
Thank you for showing your testing of a relay in both "good" condition and "bad" condition. Bob Peoria, AZ
Thanks again for a very informative video
Thanks Jeremy! This is a nice bit of kit!
Just ordered mine. thanks buddy never even knew they made them. LoL. That's why I watch you always good tips and advise.
Just thought I'd say thanks. I got a tester just because I saw your video. I usually just replace them because they are cheap and it doesn't come up too often. Turns out at ended up needing it already. Thanks!
This was a really helpful presentation. Thank you for sharing
Glad it was helpful!
Wow this is going to save me time. I just ordered one
Thank you
$24.00 in 🇨🇦
Thanks for the info, I been curious about those , I subscribed, keep up the good heads up 👆 😊
Now that's pretty dang cool!
Great find mower med!!!!!! this is a must have!!!!!!! Thanks for the share!!!!
Thanks buddy , already ordered mine ,,hey ya'll the best on You Tube ,,from SJ we say HEY !!
Good info, thanks for your videos. Summer is almost over. Need a video on winter storage tips for small engines. ********************
The OLD MAN from EP here MM1 great video with a very useful tool. I will be talking with my son Jake to check out this video and see if he wants to order one for the shop. We have not worked on many riders with relays but there was one and the aftermarket Mexican relay was bad wish we had the tool back then.
Nice video love all the new testers 👍👍
cute toy i cant see where it load tests the contacts anywhere on the site. ive had too many relays that worked but caused problems from high volt drop.
Voltage drops are normally caused by a bad connections at the fuse block not the relay itself.
@@THEMOWERMEDIC1 ive seen my share
gracias
Awesome tool got to get one
I wonder if you could do video on pressure washer pumps , if you know anything about them ThankYou
What about 3 pin relay?
FORD MONDEO MK3 2000 2007 INDICATORS LEVER HAZARD INDICATORS RELAY 93AG13350AC.
Several car brands use it, not just Ford
Hi thank you for you video.
The link does not work anymore do you have a part number of brand to look it up?
Thanks again!
Great info I’ll check it out today. Thanks man. The shirt, where can I get one of those heck we’re even the same size 🤠
Well I kind a got in trouble with some copyrights on the shirts so I don’t sell them anymore
Uh oh. Well maybe next time. Hey boss a big thank you for your channel you’ve helped me out many times. Blessings to you and your family 🤠
I need to get one of those. My riding mower runs good but it take a few seconds for it to shut off when i turn the key off
Good time saver
Very good video.
Link to Amazon don’t work.
What I don't like about the relay tests is that they don't give a proper load to the contact points in the relay with an old type of light bulb? A relay or wire can measure well until you load it with current. It should have given a load and measured volt loss!!
I am not sure why, but your link puts me into Spanish version of Amazon. I can change out of it but then it keeps reverting back.
I hope that this is an affiliate link and you get at least little kick off of it as you just sold one for them.
Thank you for taking the time to share.
Do you need to change your settings in Amazon
@@THEMOWERMEDIC1 I would not think so. Yours is the only link that does that, so I would suspect it is in the link.
I was hoping that this Tool would check the ENTIRE Electrical Circut with Safety Switches...
you've got me convinced! but how is it holding up nowadays a year after? they're on sale on the 11-11 sales promo of lazada. thanks!
Great tool to have I'm trying to use the link posted to buy one it isn't working can you give me the link again thanks again
So, what's the big difference between the buddy and this relay tester
can it test mikro relays or only the big standard
MM1, where do you find the best price on these types of relays. Great channel.
cool thx for the info...i just ordered one & sub'd too!
can you tell me can use a 36-volt relay in a 12-volt system?
Great video.
Man you grow a beard , fast!,,,,,😂
What about relays with skirts ( weather shielded )
Take the shield off or make jumpers
Thank you I thank lisle makes adapters
Would it matter which way you put in the 4 pin relay tho?
What about six pin relays?
It only does 4 and 5 pin. I could’ve swore I stated that in the video?
Come on 3 bucks! Last 12v relay I bought was closer to $15 ! This tool could pay for itself in SHORT order! 😏
Sorry that was dealer cost, more like 5 bucks. But never 15 that’s hiway Robbery!
That was my question as well. MM1, where do you find the best price on these types of relays. Great channel.
Find? I just walk into my auto part store
@@THEMOWERMEDIC1 I’ve had to replace the relays on my Scag Turf Tigers and didn’t think to look at the auto parts store. The Scag dealer always wants top dollar. You think the auto parts store would be able to spec it out and carry it?
What’s the device name?
Your amazon link doesn't work anymore.
that tool fixes guessing and attempting to figure out how to bypass relays to test the system.
can it stress the relay?
i have same tool, but is not working to test some BMW relays is showing that are not working but actually are good relays, anyone else same issue ?
Yes man I'm having the same issue... The BMW relay I last put in just broke this stupid Chinese junk ... They do not test Type A relays which are what BMW would be using with your setup... Need to test with multimeter or find someone that knows if their companies product will test these relays... I've emailed some companies they don't even know themselves.... The eBay ones are cheap but to buy a way more expensive brand, I'm not sure if that will work hey
Relay tester link is broken . . .
Link broken
RELAY TESTER amzn.to/3XKJdm7
Thanks! Any luck with the Meg Mo Blades? I want to order two sets.
@@pattayperformance I love them.
Just checking if there is a new link as the old one is broken
now if they could just make it use a 9v battery
Do you know why this tester can't test BMW/MINI Tyco Green, 5 pins Relay 61368373700, V23134k59x312
I'd say they are type A relays and these pieces of crap don't do those
This is a counterfeit product. A knockoff of patented Relay Buddy.
Its Belly
How can the relay tester save you money over the "YEARS" when you bought it a couple of months ago? You lost me there lol
Probably because of being an investment
for sure that tester is made in china...