FIX: Print Spooler Service Is Not Running - Windows 10
Vložit
- čas přidán 15. 11. 2016
- In this tutorial, I will address the following printer errors you might be receiving on your Windows computer: "Operation could not be completed. The print spooler service is not running." or "The Dependency Service or Group Failed To Start". There are two methods explored in this tutorial, and the 2nd one applies only to users of 32-bit versions of Windows.
Some users may get a “print spooler service” error when you trying to install a printer in Windows that says:
Operation could not be completed. The print spooler service is not running.
To solve this error, try the following steps.
Press “Window key” + “R” to open the Run dialog
Type “services.msc“, then select “OK“.
Double-click the “Printer Spooler” service, and then change the startup type to “Automatic“. This sets the Spooler service to start automatically when you restart the computer. Select “OK“.
Restart the computer and try to install the printer again.
If the Print Spooler service keeps stopping after your restart it, the problem is most likely related to corrupted printer drivers that are installed on the computer. Try uninstalling all printers and printer software from the computer and start from scratch. This may include PDF writer or faxing software as well. Anything listed in the Control Panel under Printers & Faxes I would do away with. If there is any software installed for other printers in Add/Remove Programs I would uninstall it all. Obtain updated software from your printer manufacturers and reinstall only the items you need.
Are you seeing an error similar to this: "Operation could not be completed. The print spooler service is not running." or maybe "Windows could not start the Print Spooler service on Local Computer." Is your list of printers gone or you get an error when trying to add a new one? Here are a few solutions that have worked for us!
Solution 1:
PRINT SPOOLER BASICS
1. Start - Run - services.msc
2. Find Print Spooler and make sure it's set to start Automatically and try to Start it.
3. Check the Dependencies tab.
Solution 2:
LEXMARK SERVICE
1. In the Services list (see above), see if you have "LexBce Server."
2. If you do, set it to start Automatically and press Start.
Solution 3:
EDITING THE REGISTRY
1. Start - Run - regedit
2. Located the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler
3. On the right side, double-click on DependOnService. It should have only RPCSS and HTTP. Remove anything else, including LEXBCES.
3. Click OK and then exit the Registry Editor.
4. Restart your computer.
Solution 4:
DEP SETTINGS FOR SPOOLER
1. Start - right-click on Computer and go to Properties.
2. Click on "Advanced" (it's "Advanced System Settings" on the left list of newer computers).
3. Click on the first Settings (under Performance).
4. Click on the Data Execution Prevention tab.
5. Select "Turn on DEP for all programs and services except those I select."
6. Click on the Add button and choose spoolsv.
7. Click Open and then click OK when you get the warning.
8. Click OK and restart your computer.
This tutorial will apply for computers, laptops, desktops, and tablets running the Windows 10 operating system (Home, Professional, Enterprise, Education). - Věda a technologie
Did I help you? Consider a one time contribution to support new daily content on this channel. www.paypal.me/MDTechVideos
Bless you MDTech ! I was loosing it until I saw this Thanks! In my case I kept pressing start on print spooler like you showed and it wouldn't start, but I just needed to restart after following your instructions and it finally worked
Easy to follow and worked like a charm. Thank you!
Your welcome!
Great stuff mate, one of the few tech videos that actually helped me😂👍.
Glad it helped
Cheers mate. My printers been doing my head in for a while now. I always have to convince it to print. Think this has fixed it. Thank you 🤘
Thanks brother, I forgot that I disabled it a months ago. And now you saved me 😄
You're welcome!
@@MDTechVideos Thank you, bro, this solved the brother printer issue.
Thank you Sir! You are a good teacher.
2:34 it’s enough for me, ty a lot sir. You are great ❤️
A very helpful video! Thank you!
KIRBY
Very helpful . Thank you for this tutorial
Glad it was helpful!
What to do if the printer maintenance tools are not showing in windows 10 when having to clean the nozzle?
1:12 What worked for me is a full restart and then running "Services.Msc" as administrator (so right click and select run as admin) and then start the print spooler before this it would say its starting but turn right back off
Thank you soo much for this video. More power to your channel
Great tutorial. Thank you
Your welcome!
WOW. worked like a charm when all else failed!! Better than calling EPSON tech support waiting an hour on hold then getting someone who doesn't know WTH to do and puts you on hold 1000 times while they look in a book and charge you up the wazoo for tech support.... THANK YOU!!
You're welcome!
Bless you, I had issues with Adobe Acrobat refusing to install because of that issue ... Thanks to you it works perfectly fine Thx :D
worked great, hit "start" on Print spooler, good to go
It works !!! Thank you so much..
Worked great. Thank you.
Your welcome!
Worked on my 64 bit version. Thanks
You're welcome!
I have to restart PrintSpooler service every time I wanna print something
Is there a bash script to let me restart the service with double click?
net stop spooler
net start spooler
My screen is greyed out and I don’t or can’t access it to change the setting that you suggested. So can you please 🙏🏾tell me what would cause that they of error?
how i access lpr tcp spooler from ip to print pdf
Thanks bro. This still working in 2023 :)
Glad it helped!
thanks helped me out a lot my mother was panicking thinking she needed a new printer lol wonder why 8 people disliked?
Because people don't follow instructions, don't like me, ect.
This was a helpful tutorial in helping me solve my problem.
You're welcome!
thanks for video, its very helpful
Your welcome!
Worked, thank you!
Your welcome!
I got a new modem and I had to reinstall all my printers. This is a shared printer that I am trying to reinstall on my husband‘s computer. I use the printer upstairs in my office and he just prints upstairs… I literally just went through this video because I hope this helps me
Yes it really works. Thank you. 😊😊❣❣
You're welcome
Both the Dcom & RPC functions on my pc are greyed out and blocked so I can’t fix it can you suggest any work around to fix
Same!
It worked for me thank you so much !!!
You're welcome!
Thank you so much. This worked for me. Appreciate it :-)
Glad I could help Belinda.
Me too, thank you.
thank you, you are the best keep going
Thanks, will do!
Thank you so much, it works
You're welcome!
my dependencies area is blank for me.. im going crazy here trying to use this printer.. its less then a year old!
It did not work for me, I had to install the app on my phone =/
very helpful video
Glad you think so!
thanks
Thanks
Glad to help!
Thank you so much ❤️
You are welcome
thnk u so much
thx john
You're welcome!
thank you so mach i love you
You're welcome!
fix the problem with thanks
at first i thought you would rap the whole video