Hercules Hobby Mercedes Actros 3363 with DIY Sound & Light Driving Together With TAMIYA King Hauler
Vložit
- čas přidán 28. 08. 2024
- In this video: The Hercules Hobby Actros 3363 s finally done and driving together with the TAMIYA King Hauler!
Your supplier for the pre assembled Open Source Sound & Light Controller: www.pcbway.com/
Features:
- 3 speed shifting transmission, synchronized in software
- Full set of lights including beacons
- Many custom made, 3D printed parts
- 2 speakers
- DIY receiver and sound controller. Mounted inside the cab, including 2S LiPo
- Shaker in the roof is simulating engine vibrations
Sound Controller:
Virtual 3 speed transmission: • WPL B36 URAL-375D With...
Flysky support: • The Best Engine Sound ...
Revving sound, Kennwort sounds: • ESP32 Arduino RC sound...
SCANIA V8 Open Pipe: • Worlds Most Realistic ...
Light & sound controller features:
- Sampling rate up to 22’050Hz, instead of 16’000
- Multiple sounds can play simultaneously
- real DAC outputs, no R/C filter circuit required
- the variable speed engine sound can play at the same time as an additional sound with fixed speed (a horn or a siren for example)
- A lot of pre configured vehicles are available
- special sounds included like: „Martinshorn“ fire truck horn, US Police siren, Swiss post bus horn, train horn, car horn, MAN TGA truck horn
- Engine sounds for: Land Rover Defender V8, ford Mustang, Chevy Nova, Dodge Challenger, MG B GT V8, LaFerrari, Scania V8, Ural V8, Kenworth, CAT, Detroit Diesel etc.
- Air brake & jake brake sounds
- Output for vibrating motor, which simulates engine vibrations
- Unique vehicle inertia simulation (if crawler type ESC is connected to pin 33)
- Virtual clutch, making the engine sound much more realistic (if crawler type ESC is connected to pin 33)
- simulated manual 3 speed, automatic & double clutch transmissions
- The TAMIYA 3 speed transmission is synchronised in software and can be shifted while driving
- Many light functions like headlight, tale light, brake light, indicators, blue light, foglight, sidelights, high & low beam
- 6 PWM RC servo signal inputs
- 13 light outputs
- PWM, PPM, IBUS & SBUS communication, makes it compatible with most common remotes
- The pre assembled SMD PCB can easily be ordered according to: github.com/The...
Banggood Weekly Coupon Deals: goo.gl/D8B1Mu
Banggood Weekly Discount Deals: goo.gl/uGS7Lf
Sound controller links:
- PCB including SMD components assembling: www.pcbway.com/
- ESP32 board: www.banggood.c...
- PAM8403 amplifier: www.banggood.c...
- Speaker: www.banggood.c...
- Discussion thread: www.rc-modellb...
Truck links:
- Actros Kit: www.banggood.c...
- Hobbywing Quicrun WP 1080 Brushed Crawler ESC: www.brack.ch/h...
- 540 35T brushed motor: www.banggood.c...
- Servo (you need 2 or 3): www.banggood.c...
- Bruder 42624 low loader: www.meinspielz...
My DIY Open Source Arduino Stuff:
github.com/The...
github.com/The...
github.com/The...
www.thingivers...
github.com/The...
Check out my other RC videos: • Remote control
My GitHub: github.com/The...
My Thingiverse: www.thingivers...
Follow me on Twitter: / thediyguy999
on Flickr: www.flickr.com...
and on Instagram: / thediyguy999
If you want to support this channel:
/ thediyguy999
paypal.me/thed...
#TheDIYGuy999 #TAMIYA #Actros
ACTROS!!!!!!!
Actros!!!
They both sound and look absolutely amazing. 👌👌💥💥👍👍
Thank you so much
great technical skill
Thank you
Hi! Amazing system you've developed here, can't wait to get it in a rig up and running, however there are 2 specific engine sounds Im after that currently Haven't been done, would it be possible to release a tutorial showing how new engine sound files are made? Im sure many others including myself would be greatly appreciated, the 2 engines I'm after is a CAT C15 and a Detroit Series 60, Thanks in advance,
Nice job my friend!! 👏👏
Thank you
Still sounds awesome! I have one of your units in my Scania…sounds and works beautifully! Thank you again for making this available to all! Just one question…how did you wire your spotlights on the roof to work together with the headlight flash function?
Thank you. They are sharing the same pin. This truck has separate full beam bulbs. They are wired with the spotlights in parallel. In order to use it, you have to add this line to your vehicle .h file:
#define SEPARATE_FULL_BEAM // The full beam is a separate bulb, connected to roof lights pin. Connect roof lights to side lights in this case
@@TheDIYGuy999 thank you…will give it a try on the weekend…
Thank you, added the code and works just like yours now!
Would love to see this installed in a 1/16 scale Tank, or boat for that matter!
Probably soon in an excavator
Show perfeito parabéns 👏👏👏👏
Thank you
Always amazing..love it
Thank you
how the beacon light can work together with the rotating light?
sorry i mean duoble flash light with rotating beacon light
Sounds great!
Thank you
hallo martin, i have i question
can we put a delay for airbrake sound
after start sound?
🔥🔥🔥🤘😎👍💯✅
I liked and Subscribed
Thank you so much!
Nice video
Thank you
awesome!!!
Thank you!
Whats size truck is on the back
Do you build custom led lighting system for sale?
Its that posible to synchronize the shifting transmission with 2 speed gearbox?
Yes, but you may have to change code lines 2675, 2684, 2723 and 2730 in order to adapt it to your gear ratio. It also depends on how much backlash the transmission has.
So hallo jet teste ich schob seit Tagen dein Modul zu laufen zu bekommen und stelle mich scheinbar zu dämlich an. Ich habe die smd Version aufgebaut. Und möchte ein flysky ibus endfänger dran betrieben was muss ich da alles umstellen version ist 7.9 fznke und empfänger sind FS-TH9X+IA10B
Are you using a SFR-1 soundboard?
No, I developed my own soundboard. It is open source and you can ind the links in the video description. Also have a look at my other videos.
Ist es möglich die Blinker auf ein Schaltkanal zu Legen ? Wenn ja wie
Ja, siehe "adjustmentsRemote.xlsx
vor #define AUTO_INDICATORS" muss // hinzugefügt werden, so dass sie nicht von der Lenkung gesteuert werden
Okay sehe ich das richtig das dafür ch 12 und 13 Benutzt werden
@@andreasfrohlke5330 Nein, CH6 gemäss Excel. 12 und 13 werden nicht benutzt
@@TheDIYGuy999 mein Englisch ist gleich null wie funktioniert das dann mit der warnblinkanlage