Mavic QR Freehub Body Bearing Change
Vložit
- čas přidán 27. 07. 2024
- Mavic Quick Release Freehub Bearing Change
Bearing 608-2RS Size 8x22x7mm If you find the videos helpful and would like to make a small donation to help support the channel you can do so here www.paypal.com/paypalme/freet...
Buy me a coffee
www.buymeacoffee.com/Freetocycle
Show your support via the Patreon page
/ freetocycle
Follow me on Instagram
freetocycle...
info@freetocycle.co.uk
Thanks for watching. - Sport
No nonsense, well executed by someone who knows what they're doing.
Info for anyone who cares. When you are putting the aluminium flange nut on turn it gently anticlockwise first, you will feel the 2 threads "click" into place, then you can tighten. Adopt this for any nut thread interface especially on fine pitch threads and you should never have cross-threading problems. He did it here but didn't point it out. Thanks for the vid.👍
Great thanks. Very hard to find old quick release axle type guides👍🏻🔧
FYI: Mavic has since 2012 used a 9 mm axle in their FTS-L freehub, (rim brake) models. Thus the drive side bearing in the hub as well as the bearing in the body are nowadays 609 bearings.
Sometimes you can use vice as a press. Thanks for a exellent tutorial. Second time this is useful.
The absolute best. Thank you! 👏🏼
Thanks. Keep going like this.
Great vids, really helpful !
Great video, really helpful thanks.
Hi, another great video, would a Shimano RS25/35 be similar as I have both and they seem to have a little bit play when I move the cassette from side to side. Thanks
Good
Thanks evry much - very useful and an example of youtube at its best !
No menion of lubing that white bushing (the source of the infamous Mavic squeal ?). But I supoose that is comon sense.
Hit it with light mineral oil. I used it, no more squeal. Just add drops in and swish it around. Good to go!
what about the white bushing on the other side? Is it sold somewhere? Bearings on my bike are o.k but thie plastic bushing seems to be a little worn.
it's almost the same freehub than on Mavis CrossMax 2002. Is there normally not oil in the freedhub body ? There is a special rubber washer in de hub to keep the dirt out and the oil in.
Do you have any video for the 2nd bearing in the rear hub?
Hello can you please tellme what tool do i need to replace my crossmax st 2012 bearings mtb wheelset?
Can I change the hub in the mavic cosmic pro wheel from campagnolo 10 to shimano 11? Need to buy the Mavic FTS-L Freewheel Body HG11 for Shimano HG?
What sort of grease do you use?
Hello from Spain . I have got the freehub of the wheel cosmos. I am using It with a new rim. But from the year when I did purchase the wheel, 2003, I have not disassembled It. I have tried It but all I managed to do was to take out the axle. The hub is firmly attached and I can not take It out. Allegedly the procedure to extract it comes in the 2000 Mavic user manual, wich I can not find in the net. I would appreciate your help about this old freehub, wich I am aiming to service and keep using on one of my secondary wheels. Thanks for your Vídeos. I ve seen others that helped me before.
I managed to remove the hub from the wheel. But now I have problems to dissasembly it. Any video about the Mavic hub M40323?
Excellent video, any idea what brand and model of the bearing.
The bearing size is in the video description, search the number online and there are many available!
@@FreeToCycle thank you
how do u deal with the mavic 'squeal of death'? Any lasting solution?
What bearing do these hubs use? Have the same hubs. Would like to order new ones
608-2RS
Ahh thank you so much. Have you tried replacing the outboard bushing with the 25 32 4 bearing?
My hub developed a wiggle so it's either this bearing or the bushing from my research online
Good, but you could have given precise details of the replacement bearing!
The details of the bearing are in the video description!
Seriously, it's still bad, the problem is the Teflon ring, it needs to be replaced with a ceramic bearing and then the cassette is stiffer and works better
Hi, can you please tell me the bearing code or dimensions. Great video !!
Bearing code is in the video description!
What size bearing is this?