I have a DLC Coated 3mm 3 Flute with 0.15mm Radius, but it's a long end mill. And it screams for mercy at 200mm /min with 1mm Depth of Cut Full Radial. I don't know what I'm doing wrong.
Same problem here. I believe in my case the problem is the type of alluminum alloy, tends to stick to the tool very very easily. Very low T melting type of aluminum. Will have to try other alloys
@@tabsquare I think that "End Mill" might have been for Drilling. I think I used 5083 Aluminum, but I was spraying a water mist and adjusting the water depending on the feed rate. You can go 400mm / min full radial with a depth of 1mm. I mostly use a 3mm, 4mm and 6mm End Mill with 3 Flutes.
I like the video (tool looks awesome) but I love the disco rave soundtrack even more. Need that in my workshop :-)
ko can loai coated dau a Giang chi can 3 flt duoc roi
I have a DLC Coated 3mm 3 Flute with 0.15mm Radius, but it's a long end mill.
And it screams for mercy at 200mm /min with 1mm Depth of Cut Full Radial.
I don't know what I'm doing wrong.
Same problem here. I believe in my case the problem is the type of alluminum alloy, tends to stick to the tool very very easily. Very low T melting type of aluminum. Will have to try other alloys
@@tabsquare I think that "End Mill" might have been for Drilling.
I think I used 5083 Aluminum, but I was spraying a water mist and adjusting the water depending on the feed rate.
You can go 400mm / min full radial with a depth of 1mm.
I mostly use a 3mm, 4mm and 6mm End Mill with 3 Flutes.
Do you use coolant
end mill chay alumium theo em thì không cần phải mua loại có phủ như vậy
What kind of work does your shop do?
It's my friend's shop, they do part machining
@@GIANGTHETOOL Oh, like a job shop?
@@makun16 Yes, bro ;)