How to design parametric skin in revit massing
Vložit
- čas přidán 28. 08. 2024
- Easy technique to design your parametric facade in a few simple steps using revit massing and adaptive family .
.
.
Download files from here :
t.me/SKETCHWAY/11
project name:
Dear Jingumae Building
link:
www.archdaily....
| Facebook |
/ sketchway
| Instagram |
/ sketchway_studio
|Telegram |
www.t.me/SKETC...
Thank you very much finally someone who explained this in few steps rather than 100
You are a genius, thank you for your knowledge, everything explained works!
can you help me please, it doesn't work on my revit 2021
Such a clear explanation! Thank you
Most welcome ❤️❤️❤️
Thank u alot ❤❤its very useful
The skin is not attached to the building. What is holding it up there? It's very important tutorial. Thank you!
Thank you for your wonderful video. By the way, do you know any way to calculate the surface area of a massing in Revit?
Great video! very helpfull for my 3D model!!
I hope you will continue to train creative architecture, practical application step by step👍✔ And upload all what need tutorials ✔💙 #for_support_u
Thx our friend for your support... ❤️
Of course we'll do ✌️✌️
Nice work keep it going ❤🌹
❤❤❤
very good! Thank you
it doesn't work, please help. I work on revit 2021
Thank you for your great effort, but I've tried to make rectangular profile but it does not work, I made it with parameters and without, it does not work in both conditions .. do you know how can I fix this?
Most welcome @osamaabdelmohsen2262
Did you try it in circular method ?
make sure that this method work with you , after that try it with rectangular profile
@@sketchway1320 with rectangular profile it does not work entire rows but only some
Ive followed exactly frame by frame multiple times but no ‘reference line’ comes up on the filter????
Thanks for the tutorial. But I can't get the reference line when I select all of them. Then, where can I find it? It's only Lines: Model Lines. Thanks in advance
Most welcome dear, After u select the points and turn it to adaptive ,You should select all of them and click on spline from draw list ,and when u upload it to the project u will find it in component
@@sketchway1320 thank you sm🙏🏻 i'll try it later
Thanx dear, Check our telegram channel to download all needed files for this tutorial .
t.me/SKETCHWAY
I have been trying, my family is not attachibg with the points of mass, the last step
Great tutorial, and clear instructions, but mine in isnt working, it loading into my project as a Dot. Like a point placement. Its very frustrating, im following all of your clicks as it is.
Make sure of the units and scale in family file and project file .
Great work great 👍🏻. i have a question, Can we achieve the same results with placing curtain walls on mass face.
No, We can't .
Cause the Mullions will not be smooth like this .
I did every steps correctly but the family in not bending acoording to nodes... please tell me what to do
watch another video this one isn't helpful
I also had the same problem. It was because when making the circular profile I chose model line instead of reference line. Try doing that
honestly, for me, I created multiple reference lines on different levels then on each level I created model line of SPL line with nodes. Afterwards, I selected all the model lines which was created, then created the form. then I had a family created of only six adaptive nodes. I placed the six adaptive notes on the SPL line nodes then I clicked on repeat and it built my entire form.
watch Adaptive Profile in Revit 2019 ( Extra Tutorial by Niko G. on youtube. his method worked for me
When i put the family it doesn't walk with the curve
You need to make sure that family is modeled correctly
ive finished the object but theres this kind of glass that sticks to it. How do i get rid of that? thanks
You can add material parameter for the object from family file ,after that you could fix it from project file and change it to what ever you want it
when I am trying to create form when making the parametric dots, it says it cant? i don't know why
is it possible to make them run on the diagonal between the nodes?
I am not getting the option of Reference lines at 08:06 instead I am getting only Lines (Generic Model) option. How to fix it ? :(
Convert the lines to Reference lines from properties then continue
Great work ❤❤
Thanks ✌️
Hi Thanks so much, but my pattern won't bend around the mesh, and I checked it's the Generic Model Adaptive Template .
Most welcom dear , while you creating the adaptive family make sure that lines are reference lines .
Also, try the family if it's working before loaded into project by move one of the adaptive point .
let us know if the problem solved :) ..
It is Not working before loading in project aswell, and I have even used the family template provided by you :(
@@sketchway1320
how to make back support angle for this facade....pls
I can't join the family with nodes...means it dosen't turns it places daigonally
Make sure that you use the right family template you could download it from our Telegram channel.
The link in video Description
الاطار ما رضي يلف معي
Why it doesn't work with me
Could you define the problem?
when I do the repeat part it doesn't work, any ideas how to work it ?
You can download the family from Telegram channel the link in the video description.
You could use it if you didnt success in creating it and you could make sure that it works well... ❤️
greatnesss
Is it possible to make it in vertical with the same way you done this one?
Yeah, You can use the same way ✌
need more
How can you change the material of the curves?
From family file select shape from properties click on material , to edit material in family file click on 3 point button or by clicking on parameter button you could make it parameter to change it from project file .
Nice video but the music is so ANNOYING 😢😢😢😢
hey , thanks for video great but my family wont round :S
We appreciate your comment our friend ❤️❤️❤️
Make sure that you used the generic model adaptive template
Waduh 😅
waste of time it doesn't work