Awesome Fast $55 - 14S Active Battery Balancer - 1151
Vložit
- čas přidán 3. 02. 2022
- I was suggested this Active Li-ion Battery Balancer for my 14S battery banks. Even if $55 was a little to the good side,, I got one to test it out. And I must admit that it is way better than the other methods I have tried out. And it is very fast.
Check out my little shop : www.myplayhouse.dk/shop/
" Be aware that the shipping prices are worst case, until it know where to ship to!! "
Please check me out on Patreon : / myplayhouse
I do a weekly "What´s UP video, much like the first video of the year, but 5-8 min and unedited, but there is also the private meeting and chance to influence things before it hits CZcams.
[Affiliate Links]
Link UK - Active Battery balancer 14S : amzn.to/3shGOAS
Link US - Active Battery balancer 14S : amzn.to/34za91t
Link CH - Active Battery balancer 14S : s.click.aliexpress.com/e/_9hia97
Battery Monitor - s.click.aliexpress.com/e/_9hanZR
Power Supply minleaf NPS605W - shrsl.com/2ruok
___________________________________________________________________________
/ myplayhouse
For 3$ a month, you get an extra weekly "What's UP" update video. Just for my Patrons. The Support I resave on patreon is all used on stuff to make interesting videos on CZcams.
My PlayHouse is a channel where i will show, what i am working on. I have this house, it is 168 Square Meters / 1808.3ft² and it is full, of half-finished projects.
I love working with heating, insulation, Servers, computers, Datacenter, green power, alternative energy, solar, wind and more. It all costs, but I'm trying to get the most out of my money, and my time. - Věda a technologie
I had both but decided to go with the better one. That one has bluetooth with phone app. for configuration and monitoring and can do 4 A in a different manner more effective. Surprisingly did not cost that much more and it was a no brainer to decide which one to buy.
My packs are built from recycle batteries so most definitely out of balance from day one and I need an active balancer that can effectively and quickly equalizes all the pack during use and not use. Originally i did not have the balancer but frequent failure and short of capacity when the weak pack brought the strong pack down during use made me think of a solution. Active balance is the solution that will prolong battery life and max. capacity usage. Under $100 is a worthwhile investment. The brand is Neeley i believe and there are a lot of knock off all comes from China. Where else would they come from?
I learned this from this Australian guy off grid garage. He has a nice shop with all the nice toys and batteries and so on and he did a bunch of experiments on different active balancer. I give him credit for doing the work and the expense of buying those things for us to learn from . Thanks mate!!!!!!!!!
I started this solar thing more than 10 years ago it was expensive back then on everything but now way cheaper and more choices. The more of us doing this the better it is for the environment. It is very satisfied to harness the sun power for electric use.
Go for it people!!!!!!!!!!!
Hi @whatmust8146
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
I agree completely. My loud fan dual 6s charger has been going for a week and I still have about 13 more batteries to go. I use a cradle system in series,. I need to get some sleep and I think your answer is my answer for sure! BT-Active BMS With Android app. That being said this is an excellent video to help understand how these things work.
Thank you. This is great information.
Glad you enjoyed it!
@My PlayHouse - Remove the connector between the red cables. That gives you als some resistor and you can lose some milli voltage over that one.
Yes,, but I also like to be able to see/show what is going on.
Your original idea to use wire holders to hold pairs of 18650 cells is great. I found some that house 6 pairs perfectly with the exact width.
Yes,, but I ran in to problems with how to put pressure on the cells to keep them connected,, and two cells in parallel,, and still have to use a BMS,, that comes to a lot of BMS's :-)
@@MyPlayHouse I cap both ends with U aluminum plates and 2 copper contact springs. It works for me because I don't balance them. Thanks.
Am sure Active Battery balancer 14S can plug into right hand side of battery montior because they are connected together and charge from there
The pin spacing is wrong :-/
Nice 👍
Hi DIY with Batteries
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Looks like a very useful balancer, and my e-bike uses 14 cell battery. I checked on Amazon and I think the connector might be wrong size to plug into my BMS, the pins on the BMS are spaced about 1mm apart (difficult to measure). Do you think there are adaptors that would enable connection a smaller BMS plug?
Yes I have had to do some cabling soldering as well.. to make it fit.
I need a good balancer for my 24 leaf modules for 24 volt system i have running my camper. My two stacks of 12 leaf modules are running two inverters total of 7000 watts of inverter power but they never see that much draw. One inverter is a split phase 220 powering my minisplit and the other is a 3000 watt with the camper plugged directly into it. Ive ordered lifepo4 cells 16 of the 280 amp hour to go with the 3000 watt inverter but still want to use the 24 volt 24 modules of the leaf for my air-conditioning. Any advice on a balancer would be appreciated
Hi @matthewknight5641
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Can this single cell voltage tester be used with EVE lifepo4 batteries 3.2v in a 4s pack so a total 12.8v battery pack?
I do believe it can,, but follow the links and see if they do not write that as well
How far did you get on your 1kwh 18650 power banks? I'm basically working on the same thing, but I'm just beginning.
I have 5 that runs, 4 that is running, and 3 that I have not completed yet.
Sir :
What is the problem with the other device whis has monitor ??? I liked it !
AND :
The device you explained it in this vedio ( 55$) , does it work with li ion batteries ? Or it is for another kind ? Cars battery may be ??
It did work.
If I buy 10-14s, can under 10S also use this battery balancer?
I would think so,, But I do not KNOW.. sorry.
i blow up 2 of the 1.2A versions because one of the cells were 4.25 volts wth...and how about this one does the high voltages dont burn it ??..and how about connecting and disconnecting the balance wires from the balancers to use them on other battery packs with already cables pre installed ?? i have the connector version 13s ...not the solder version...thank you
Hi ,,, I looked it up,, and - Working voltage: 1.8V-4.5V ,,, so not much room for safety.
@@MyPlayHouse thank you for your reply....how about connecting/ removing the balance cable plugs over and over ??
my problem is im repairing 10s batteries and want to have them balanced after the charges...and remove the balancer and start balancing new 10s battery...all tips welcome.
Sir ..please could you emphasize that the one of 17s works with battery of 16s and also with battery of 13s ? Do you know for sure ?? Thanks alot
Sorry,, *I do not understand...
Hi sir. I asked you before but I had not known this LCD. So :
Is it a monitor to watch the voltage of all strings like 1-24s ?
Could you give me a link to buy it or its name to search about of it. Thanks very very much ❤
Yes it shows you the voltages on all your cells in the battery.
@@MyPlayHouse
Its name or link please ?
How is this balancer holding up? I have heard mixed results. Thanks
It is still fine :-)
Please .. could you give me the proporties of the rheostat you used in the video ..
I think it is like 5W from 0 to one or two K Ohm
Does the light go off when it’s done?
Sorry,, I do not remember...
Where can I get that bms display
Hi,, I have done a video on the display,, and there is a link in the description of that video : czcams.com/video/Fo1N9RhQaGQ/video.html
Nice balancer. But I am suspicious about your "teflon" wires. I would think polyethylene insulated instead. My only reason is that teflon to my knowledge is quite difficult or even next to impossible to colorize. Tell me, if I am wrong! You can test the colored wire insulations with your soldering iron. Polyethylene will melt easily, while teflon takes more heat than the old tin-lead solder. Maybe even more than the modern tin-silver-copper mix.
They are teflon soft,, but I am no expert on that,,
@my playhouse what color is the led? Mine was amber, does it mean anything?
øhh I do really not know..
Too bad this thing doesn't have an ESP32 interface for the price, that would help me justify the price.
Yes,, it is weird why this is $55 it seams so simple..-ish