Paint Zoom Overheating Problem and What You Can Do to Fix it.
Vložit
- čas přidán 22. 08. 2024
- How to fix the overheating issue of the paint zoom and how to mix paint for paint zoom
Paint Zoom Unboxing, Quick Demo And Comparison
• Paint Zoom unboxing, q...
facebook page
/ diy.diyer
here's a video of my homemade watercooled compressor made from a junk air brake pump czcams.com/video/tNmAcYsSxIw/video.html
This is a very good analysis of the problem and a demonstration of a simple and effective solution. His English is also better than most for a non-native speaker. Right on man!
Hi....MR DIYER am from India tamilnadu I have idea to brought this paint spray gun for my house but have lots of doubts but now am very clear thank u friend God bless u
Thank you for taking the time for your work in identifying the problem.. AND offering a fix. I loved your method. 🎉
I just bought my PZ. Now I’m ready to go!
Thank you for the Idea, Because I'm planning to Buy one and base on the Review most of the feedbacks were Overheating. I'm glad I saw your Video.
Hello Everyone, first sir thank you so much for solution thats was what I tought when I checked hose tempature was getting hotter, I immediatly see that air is blowing back, so I watched your video, and instead of opening a hole in device I rather opened a hole on hose (which is super easy to replace in case of need). You may stablise this comment so people can resolve it easier.
That's a great mod and test you did there. The type of detail I've been looking for.
thank you.
I did this to mine and just work's fine! I can use my zoom for like an hour... an hour and a half without heating problems... great video!
I would have given ur video thousands of likes if i could. Very nicely explained. My best regards.
You made my day.
By your experiment I understand that the blower motor is much heavier than what it needs.
One the solution is as you shown.
Some other technical solutions are there
1, reduce the power supply by using step-down transformer from 220v to 150v or 170v, this will reduce the airflow psi as well as heating issue.
I think it will even work on 110v.
2. Increase the winding of motor to slowdown rpm of the motor, in both these solutions the life of the motor also increases to twice or thrice, also it reduces the amount of consumption of electricity.
Thanks for sharing such a great experiment.
were you able to try it in 110 v? how was the motor heating?
@@donnunag1503
No bro, but have purchased one on Amazon and received broken unit, so return it.
The airflow on the front side of the machine is sealed for a reason, it's because it needs to create pressure. If you can notice, the vents on the rear side of the machine is open and the vents on the front side is shut close, it's to create pressure. If you're gonna do this, it will surely improve the airflow and cool the machine, but also reduces the pressure of the air coming out of the nozzle. Do it at your own risk
thanks for the video.i have now the confidence to use my paint zoom after watching your video.i bought mine 3 years ago and just used it once bcoz of overheating issue,but now i will be able to use it again.
Very good solution 👍. Now, I'm placing my order for this unit.
Thank you for sharing ☺️.
Wow, Legit! Thank you so much. We just tried it now...the tiny hole really made a big difference in the temperature of the machine! Kudos, Mr DIYer...God bless!
Very clear and informative content! Love this type of utubers.
you are knowledgeable seeming to be an engineer. thank you you have shared very well
GOOD MAN. THANKS FOR SHARING YOUR KNOLIDGE. WAS THINKING OF BUYING ONE ,NOW WILL BUY THIS VERY TYPE. CHEERS.
Nice idea. My hand hurts when I touched the hot part. This will definitely eliminate this problem. Heat will still be there but won't hurt my hand anymore 😉👍😁
And make my paint dry and clogged the nozzle every few minutes
Thanks so much. I brought one for my sweet heat and your idea are helpful and cost effective. No need to send it back..lol
Wow thank you for this watching from philppines,I boughts one of that
Hello, Mr DIYer, I thought this video was great and I saw the positive result it caused in the pent zoom air outlet, the improvement is remarkable.
How many millimeters is this hole you made in the zoom comb? Thank you, registered and good luck with your projects.
About 10mm
Thank you so much. Im planning to buy that paint zoom but upon reading the reviews some of the problem is that over heating. But i Think its not a problem anymore. Thank you sir! God bless. ☺️
hi awk , jadi ke buat tu?
Hi! Sana may other exhaust work around like when you release the triger lilitaw ang open exhaust near the trigger. When trigger is pulled exhaust port closes. In short sa gun ang modification. Btw thank you sa informative video. Keep it up!
Yes dear
Weldone great solution... Thanks 👍
Very useful. thank you.
Greeting from Malaysia.. Thank you Sir for the life changing advice. Wonder if you can make a video on replacing the plastic sprayer gun with the conversation aluminium gun... Thank you again
Thanks for the demonstration on this matter cause I was on my way to return this product 👌 witch I were waiting for a long time and arrived like 45min ago when I switched it in it got hot 🔥 and I thought it was broken. Would it help if you could somehow install something like a heatsink from a computer 🖥 please let me know if you have tried it.
Salam dari Indonesia🇮🇩..
Terimakasih banyak atas videonya,memberi solusi paint zoom yang overheat..🙏👍
Good video and very informative. And I do hope that the rooster in the background was paired with a chicken :)
Nice 👍 good work with that mods sir shout out on your nxt video
Good job sir! Haven't used my paint zoom for years coz I felt that it might overheat, but I can now use longer. Thank you for the great ideas you shared! I also learned few car fixes from you several months ago! =)
Quick question, what did you use to make a hole in it? Can a soldering gun do the job?
@@isiahmiguel848 step drill bit. But i supposed a soldering iron would work too
feels like i've been listening to a President address a Nation, only this time about a paint sprayer :P
😂😂😂😂😂❤
Awesome guy. :) I had to jump around the video to get to the content I wanted from the title, but overall very good information! Thank you!
wow.. this is good tipss... like 1 minion times, keep up de gud jobz
I love this video! I bought my PZ 2or 3 years ago & I just took it out to last week to read directions. This wil work great now with your guidance. Where does the other blue plastic piece you cut hole into come from? It looks to be a part from the machine.
the company making this should award you.
thank you..
Wow! This is a very important detail, safety first.
thank you for this helpful video sir!
Well done ure awesome in explaining really appreciate it. Thank you
Nice video
Thank you sir for sharing. I bought paint zoom. That's should i do to keep my paint zoom in normal temperature..
Wow.. Thanks bro... God bless..
Thanks sa tutorial idol
I buy today paint zoomer.with in 2 min get heat.this vidoes helpful me.thank you bro.
very helpful videos sir
Very good very informative keep it up
Really very nice thank you so much
Makes sense with the hole drilling. thank you sir.
This really helped. Thanks bud. Keep it up!
thank you so much sir, very helpful🥰
Thank you for sharing!
Thanks for the video. Very informative and well explained. God bless.
Yes dear
Awesome! Thanks a ton. Gonna try the mod!
helli , thanks for this great vedeo
if I use the compressor zoom paint with un aother gun wich have a rugulator for the air flow
I don't need any more to make the hole ?
Thanks man for the tips.. Good knowledge to share to everyone.. Thanks alot. Stay sf
This man"!!! Dam it you just earn my sub and flood 👍"!! Keep it up. God bless.love From Philippines!!
Glad you did a follow up video because i was well impressed with your first video,so a huge thank you for this one too and you have just got another subscriber,you well deserve it in my humble opinion. 😉
Would it also help drilling bigger holes where the long air intake slots are,or do you think your mod is good enough? any help on this would be appreciated because i'm about to hit the buy it now button but wanted to ask you this first,plus is it still working ok after you used it for painting your kitchen walls?
With much love and respect coming from the UK. ✊🏾💪🏾👍🏾
i havent tried it but i would say it would. more air you can get in the better. more air circulation.
yes still working. heat of the machine maintain around 50'c, far better than the initial above 70c before drilling the hole.
Amazing video, thanks
Thank you sir for the excellent video!! 🙏🏻 gracias
Круто! Спасибо!
good video....done sub
would you recommend drilling 1 big hole or several smaller ones?
Thanks! I will try it with my paint zoom.
Good evening sir I would like to ask how many cm would be the hole? Thank you for your great and informative video keep it up kabayan. God bless.
10mm sir
Maraming salamat po.
Youre doing great . Keep it up bro
Excellent demostration! Now I can finally use my Zoom Paint Sprayer!
Thank you very much for this video!!!
Good Job Sir. Pero tinagalog mo nalang sana yung language mo total may subtitle naman.
Lol
Well done..good job .👍
You didn't show us how u make the hole please show us in your next video
Good vid dude but why not just run it with a proper spray gun like you tried it with ??
Usar um dimmer dá menos trabalho, reduzirá a rotação e a pressão de ar, creio que reduza a temperatura.
What exactly did you do here? Did you make another hole or what?
Thank you Sir!!! :)
great video . Keep it up
I have this machine but can'ot used due to higher temperature. Please guide me how dia hole and where you have done.
hi we bought this spray but my father say he try to put first water just to try it but the water didn't come out in spray can you help us how to fixed it thank you
I think the mutor is a problem
Di naman siguro need to much air power..... Siguro dapat mababa lang ang wattage ng mutor...... Just to think of it.......
I understand your way to prevent the overheating, but on another video the guy open the air inflow holes on the back of the machine, hoping that will decrease the temperature. This is the opposite of what you did, opening air outflow.
So, do you thinking that this another solution may be good too?
Hola muy buen vídeo que pasaría si hiciéramos dos orificios en la parte de atrás done entra el aire
excellent job by you
thanks
can u try to paint it on plastic brother?
Good idea
add motor speed control circuits dimmer thats easy way
Salamat sir.maron din ako nyan hindi ko na gnamit dahil talagang uminit xa.pero ngayon hindi na.
Not make any hole, just install a fan regulator to adjust blower motor speed and that's you made a air pressure control knob to this machine.
1. installing a blower motor resistor switch what you call a (fan regulator) will produce more heat. resistance produces more heat, and the more you slow down the motor the more heat resistance it will emit and because you slow down the fan, that heat will not be dissipated, hence more heat. 2. drilling a hole a is far more easier than installing a blower resistor motor that will produce more heat and you still need to find a a convenient area where you can place it. but if you want to complicate your life then go that route, by all means be my guess lol.
@@MrDIYer you can install regulator in power supply bord or pannel, not under blower casing ,so no more heating. LoL
@@kashyapg7524 ok if you say so. show us lol
@@MrDIYer i have no youtube channel like you to show this mod.
@@kashyapg7524 send us a link to ur video and i will watch ur mod.
thank you mister
Good idea guys
very very well explain earned my sub. soon to buy one
ps you speak English like Zaito lmao realtalk
Does the zoom produce much overspray? Thanks for the vids
You can always adjust the paint volume tht you can let out the knozzle.
അടിപൊളി വിഡീയോ 🔥🔥(superb and use full From India kerala )
Sir can i use touch wood the finished colour with this machine...?
Yes.
anu po kaya ang size ng carbon brass ng paint zoom...
pud pud na po kac ung sa loob ng painy zoom ko..
Bhoss tanong ko lang kka dating lang ng zoom paint ko. Tanong ko lang bkit lumalabas kaagad yung hangin. hindi ko pa pinipisil ang control
You try that in bike? Or flairings
Use total..spray ..never get heat
Thumbs up 👍👍👍👍
Yes given by year mechine
why is no body talking about the phone. it is nokia
😀😀😀
Sir pwedi po mag tanong kung pwedi naba sa zoom spray ang boysen epoxy primer or pang paint brush lang po yon. Bumili po ako kasi ako ng zoom spray tapos di ko po alm mixing ng primer tsaka pintura... thangks po sir godbless
sir ang maayos na maisasagot ko sayo ay subukan nyo nlng po tignan yung can ng pintura po. usually naka indicate nmn don kung para saan at pano ang halo ng thinner po.
Good job boss
Hi