Thank you! My box didn’t come with a Manuel so this helped a lot. Also guys when you put In the silver circular pieces make sure the + ,- (plus and minus) signs are facing up, if not the top piece will not go down all the way
@@knipsx yes it is worth it. It is not heavy and can't sustain anything over 100lb. It has space for a small light, laptop and small printer. I hope this info helps!
I bought this desk just a few days ago and I barely assembled it today and it took me 40 minutes because I only used a good Phillips screwdriver, only one screw was faulty with one of the legs for the left side so I just removed it and left it with the two wooden pegs and screwed the backwalls and it came out pretty good
Esta mujer le falta uno de esos tornillos, si bien la organizo, no podia ver mentalmente la logica de superponer cada pieza, no pudo acomodar bien la camara desde una silla o mesa, todo el tiempo en el suelo, ella parada lo hubiera hecho mejor, pero sobre todfo mostrar o ilustrar mejor lo que estaba haciendo, y lo peor el final, me dio impaciencia de ver lo que estaba haciendo en lugar de parar la mesa que estaba toda ajustada ponerle la tapa superior. !!OMG despues nos dicen por unas cuantas que somos todas brutas. Igual se le agradece el intento y esfuerzo de mostrar el ensamblaje de este pequeño escritorio. Lo hizo a su manera pero no entendida las cosas desde el mejor angulo, desde arriba. Gracias!!!
Missing manuel: Call 18005233987/ www.sauder.com Let them know you need assembly assistance. You did not receive a manuel for Desk model #425347. Tell them if they have a manuel pdf it can be emailed to you. I tried searching online for assembly pdf download but no luck. I hope this points you into a direction that may get you the help you need.
Pop the top off. Be delicate you don't want to split/crack the material. Check your screws.. reset. If that dont work You can glue it down gorilla glue to secure it. I hope this helps! Keep trying dont give up😇
Make sure the wooden dowel pins are pressed completely down into the preset holes. Also check your bolt fastners make sure they are screwed in tight and straight before applying top.If it is sticking out to far it may cause top to pop up.If necessary take those back out and place in again tightly to make sure they are set correctly before applying top. (be delicate you don't want to strip holes out or crack anything) I hope this help. If not pull out the out glue gun ;)
This desk is literally a piece of shit 😂 I threw it out. Wobbly mess, holes dont line up, screws stick out. Cheap mess. Also the letters on the desk now are different than when you did it so putting it together was annoying. Y'all if you havent put this together yet, take it back and get a better one.
🤭🤣 its definitely cheap for sure. Just what I could afford. I wish you didn't have such a horrible experience. You should get the Parsons desk. I purchased it as well. It is much larger and more sturdy. Also easier to put together and its cute. Here is the link. Its $59.00 www.walmart.com/ip/Mainstays-Parsons-Desk-White/237495192
@@DesignwithAliChia thank you! 😂 you did a great job with the video I still was able to put it together it was just the after part for me. Quality is what you pay for. Yours looked cute tho idk why mine turned out terrible 😂😭
Right now I'm using 2 tv trays pushed together and they're not even the same height 🤣🤣 This has got be be an upgrade from that. But I haven't put it together yet so we'll see!! 😂
Thank you! My box didn’t come with a Manuel so this helped a lot. Also guys when you put In the silver circular pieces make sure the + ,- (plus and minus) signs are facing up, if not the top piece will not go down all the way
Thanks and awesome tip!! A lot of people need that info!
Okay but this beat is 🔥😂 Thanks for the help! I was getting stuck with inserting the top of the desk!
This helped me so much! My box didn't come with any instructions and I was pissed until I found this video! Thank you!!!!!!!!
So glad it was helpful!
Thank you! Mine came without a manual and I really didn’t want to go back to the store!
YOU ARE GOD SENT, I WAS LEGIT STRUGGLING! Thank you so much❤️
I'm so glad it was a huge help😇
Thank god you put this on here. Lifesafer
Very helpful!!! Thank you so much!!
Omg ty! My box didn't come with instructions, and this really helped!!
omg thank you so much, nice taking us through every step helped a lot
Awesome so glad it helped you!
true true
WOW YOU DONT KNOW HOW GOOD THIS HELPED ME! Thank you!!!!
I am so glad it is helping somebody. 🤭😊
Perfect timing I just got 2 of these today 🙌🏽thank you
yay! great deal! enjoy!
Is this desk any good? Can it hold a printer and a laptop?
@@knipsx yes it is worth it. It is not heavy and can't sustain anything over 100lb. It has space for a small light, laptop and small printer. I hope this info helps!
Thank you!!!
I bought this desk just a few days ago and I barely assembled it today and it took me 40 minutes because I only used a good Phillips screwdriver, only one screw was faulty with one of the legs for the left side so I just removed it and left it with the two wooden pegs and screwed the backwalls and it came out pretty good
Great job! Im glad you made it work for yourself!
Hello thank you for the video
The 6 pins on number 4 were not used. There were in the box. Was that intentional not using them?
Thanks
Esta mujer le falta uno de esos tornillos, si bien la organizo, no podia ver mentalmente la logica de superponer cada pieza, no pudo acomodar bien la camara desde una silla o mesa, todo el tiempo en el suelo, ella parada lo hubiera hecho mejor, pero sobre todfo mostrar o ilustrar mejor lo que estaba haciendo, y lo peor el final, me dio impaciencia de ver lo que estaba haciendo en lugar de parar la mesa que estaba toda ajustada ponerle la tapa superior. !!OMG despues nos dicen por unas cuantas que somos todas brutas. Igual se le agradece el intento y esfuerzo de mostrar el ensamblaje de este pequeño escritorio. Lo hizo a su manera pero no entendida las cosas desde el mejor angulo, desde arriba. Gracias!!!
Me alegro de que el video haya sido de alguna ayuda. disfrutar!
My female thinks I am the best good looking on. The video 🤟🏾
I don't know ow where 10 goes
Did you figure it out?
do you have instructions with words because I can’t tell what’s going on here
Instructions came in the box
My top piece isn’t long enough... did i do something incorrectly or maybe manufacturing mistake ...?
Definitely contact the manufacturer. Call the number listed in the description with your model #
@@DesignwithAliChia You’re good for nothing. Make a better video with clear instructions ffs
Can a screwdriver alone can do the job?
Yes you can use a screw driver
Where can I get the written instructions?
Missing manuel: Call 18005233987/ www.sauder.com Let them know you need assembly assistance. You did not receive a manuel for Desk model #425347. Tell them if they have a manuel pdf it can be emailed to you.
I tried searching online for assembly pdf download but no luck. I hope this points you into a direction that may get you the help you need.
Lol I have no idea how I did it but I made this and I have a screw left over but the desk is sturdy 🤣
😲🤭 well its sturdy! Good job. Lol
did it take long to do
@@dashmethod7069 no , it was less than an hour , maybe like 40 mins
I messed mine up 😭 when I put the table top it doesn’t go down completely anything I can do?
Pop the top off. Be delicate you don't want to split/crack the material. Check your screws.. reset. If that dont work You can glue it down gorilla glue to secure it. I hope this helps! Keep trying dont give up😇
@@DesignwithAliChia already finished thanks tho 🙏
@@bryanmelendez3237 it ain’t going on for me either
@@jadyn509 i finished mine what wrong with yours?
@@bryanmelendez3237 lmao the same thing you said was wrong with yours. The top will not go down. The (main surface.)
I just got this and I can’t push the top which is the last part all they way down anyone else have this issue ?
Make sure the wooden dowel pins are pressed completely down into the preset holes. Also check your bolt fastners make sure they are screwed in tight and straight before applying top.If it is sticking out to far it may cause top to pop up.If necessary take those back out and place in again tightly to make sure they are set correctly before applying top. (be delicate you don't want to strip holes out or crack anything) I hope this help. If not pull out the out glue gun ;)
Yeah the holes don’t line up
I did everything right they place the wholes to close together
Oh wow. You can take it back. Or just glue the top on with furniture glue. I hope you all figure out a way to make it work out. Dont give up!
I appreciate the effort, but I very much needed someone to tell me what to do while I was listening. Lol
I understand
Yeah im 3 minutes in and lost.....
back side isn’t wood? and I’m confused on 6:34
E and F shelves (wood side down) go screwed between A and D. I hope this information help you. Look at the picture on page 3 in the manual.
This desk is literally a piece of shit 😂 I threw it out. Wobbly mess, holes dont line up, screws stick out. Cheap mess. Also the letters on the desk now are different than when you did it so putting it together was annoying. Y'all if you havent put this together yet, take it back and get a better one.
🤭🤣 its definitely cheap for sure. Just what I could afford. I wish you didn't have such a horrible experience. You should get the Parsons desk. I purchased it as well. It is much larger and more sturdy. Also easier to put together and its cute. Here is the link. Its $59.00 www.walmart.com/ip/Mainstays-Parsons-Desk-White/237495192
@@DesignwithAliChia thank you! 😂 you did a great job with the video I still was able to put it together it was just the after part for me. Quality is what you pay for. Yours looked cute tho idk why mine turned out terrible 😂😭
Right now I'm using 2 tv trays pushed together and they're not even the same height 🤣🤣
This has got be be an upgrade from that. But I haven't put it together yet so we'll see!! 😂
😲🤭🤣