@@TastyBRC hay bro know I didn’t paint it I can’t buy a xb9 body for under $100 over here it’s so bloody expensive I got this off a mugen line for $50 dollars
Fun engine overview Tasty 🎉 - Rod and maybe a set of bearing and she will last another couple gallons - As you know, The carb is very important and Its good to over view these lower cost engines. That way we know for sure what they can do. By the looks of it, you get a good package for the money. ❤
Thank you A2, yes definitely needds and deserves a new conrod and new bearings, this engine is worth every $ it costs, but not sure the owner wnats to rebuild it 😕
@@TastyBRC That’s sad but, that is their choice. - Is the engine discontinued? Can you get parts still? - It is always tough to make the decision to rebuild. If anything, it is great fun and experience to do it. Even if you do not save any money.
Merci Tasty B. Je viens de découvrir ta chaine. Ton test m'a décidé à acheter ce moteur pour le tester sur ma GT8. Je sais que ce n'est pas forcément le plus adapté pour le GT8 mais je l'ai trouvé à 143€ chez Imodel donc c'est une bonne base pour s'entrainer. Et comme tu as dit qu'il avait un bon top end, sans modifs ca devrait déjà me donner des perfs honorables.
C'est un bon moteur tu ne sera pas déçu. Il y aura forcément une difference de performances entre les moteurs TT et piste mais n'importe quel moteur TT conviendra pour une GT tant que tu ne vise pas un podium 💥💥
Je vais bientôt pouvoir te dire ça, le proprio de celui ci me le renvoie pour être modifié. Mais dans tous les cas si tu accepte de perdre en bas avec un moteur TT tu peux gagner en haut ce qui conviendra forcément à une GT avec sa boîte 2. La question c'est, est-ce qu'il y a moyen de gagner partout?
@@TastyBRC Si tu as besoin d'un autre moteur pour tester des choses, je peux t'envoyer le mien. Bien sur, si tu es d'accord pour le modifier, je te paierais pour tes services :) Récupérer de la puissance en haut c'est effectivement tout ce dont j'ai besoin pour la GT2. Et avec un 3 ports plutôt que 5, j'ai l'espoir d'avoir une meilleure autonomie. Mais tout ceci est une longue histoire, le moteur est neuf, il faudrait mieux que je le rôde avant...
@@Zedsispeho je ne fais pas ça pour de l argent.. si tu veux que je le modifie ce sera avec plaisir. Ou après avoir modifié celui de mon pote je peux te dire ce que tu peux faire facilement sur le tien.
Il vaut largement ses 159€! Très bien à mi et haut régime, pas top en bas mais je pourrais corriger ça avec un coude un peu plus long ou un autre combo échappement. Que ce soit pour l'entraînement ou début en compétition je trouve qu'il fera l'affaire.
Great engine for the price. A bit tame on bottom but mid and top are pretty good. Crank counterweight design is looking better then some higher priced engines...(with handpainted coolinghead)😆 deffinitely replace the conrod ....and bearings too. Sure it will give much more gallons of fun. Great vid again buddy 👊
Yes Kings very good for the price! I wonder if that crankshaft would fit my dusty, pretty sure it will tune better 😆Definitely deserves new bearings and conrod!
To really understand if the pinch is still ok, you have to know what it is like new. Also, checking to see if the piston skirt doesn’t go higher than the exhaust port, is a true indicator of good pinch. - If it goes above then, the sleeve is near the end of its usable life.
Really nice for a entry level engine. Kind of reminds me of the Taiwan RB’s they all were pretty good engines. But they just fell out of favor when they started making them in Asia.
Exactly, RB where very popular when they were made by Novarossi, very expensive too!! Then Rody Roem sold RB Engines .. Now he created VS Engines wich are made by O.S. but not just rebranded O.S. engines, they are made wtih Roems specifically designed crankshafts and based on the 21XZ-B 5 ports, wich are nowadays only made for his engines!!! Very interesting stuff, maybe my next black friday engine 😁
Franchement ce petit moteur a l'air bien jai l'impression qu'il marche mieux que certains moteur plus chère et que dautre marque plus réputé. Tu pense que niveau performances il est équivalent au reds 521 sport ?
Il marche très bien pour le prix et je le sais durable et qualitatif. Le 521 est mieux, plus équilibré le b213 est très creux en bas, en vitesse pure c'est surement très similaire mais le 521 a une meilleure courbe de puissance
@@TastyBRC ouais on l'entend que en bas il galère un peut mais en haut il envois après entre le 521 et le b213il y a une grosse différance de prix. tu conseille quelle ligne pour gommer un peut le manque en bas avec le b213 ?
J ai testé différentes lignes, ma ligne qui me donne le meilleur couple, la 2135, sur la dernière vidéo ne suffit pas à compenser son manque de couple mais ça reste la plus appropriée pour ce moteur.. sur la dernière vidéo je roulais aussi sans venturi. Je vais en recevoir un neuf bientôt, qu'on m'envoie pour être modifié. Je vais essayer d'améliorer le bas régime. Vidéo détaillée à venir ✌️
Impressed with the internals to say the least , the engine has a spike in power transitioning from low to mid and high end is ok in my book … the pipe can changes everything . I’d like to get my hands on one of those to try and smooth out the hit and squeeze some more high rpm pull out of it . Did you play w shims ? If you tighten her up she will have much more snap when you jump on the trigger. I just finished an Alpha .23/Gt-R Hybrid and ended up running .10 under the sleeve and nothing under the button lol . She came w .30 stack but .1 in total was the magic number with 30%/10% nitro . I didn’t get to test 30/8 as I have moved onto a Max Gt-Rx for testing .
Yes it's looking very good, 159e, 170$ you cant beat that! It will definitely run better with a pipe like the hipex 2135 or that iealsi 2186 but didnt tried, I only burnt 1.5 tanks as this engine is not mine, the conrod is pretty worn out, I dont want to kill it! Did I read well, .10 under the sleeve on 0 under the button head You like them tight for sure😆
hey Taste B I live in Europe just like you and I can't buy nitro with a high percentage of content if you don't race on circuits etc etc, my question is the following, do you think it is a waste of money to use low nitro content in big blocks? Another, it is the first time that I have a big block big red .28 and it consumes a lot of nitro, I had an Os21 TM and the difference in consumption is abysmal, what do you think about these variables that I am explaining to you? Are large blocks in Europe worth buying? sorry for the long message..
Any engine will run with low nitro fuel but not any engine will run and tune GOOD.. Some engines like it, other dont, my SH28 8p was not tuning very good with low nitro fuel but from what I hear your big red is running pretty good!!! As long as the temp is good, bash it! And yes those bigblock engines suck a lot of fuel, the OS21TM is much better IMO than any bigblock currently available, you will always get a much better fuel mielage with a .21 and most race .21 will outperform a bigblock engine Where are you located??
You wont be disappointed ! Thake goog care of it, temp, preheat and it will last very long. I definitely recommend the hipex 2135, this pipe will help a lot at bottom end power
So i bought pipe, basically i ran about 1.8l of racing experience break in fuel and engine refuses to run cold it stays always 140° and goes even higher, in manual says temp over 130° much shut off, and there's bubles in fuel line near carb niple, i don't understand too. in my eyes i don't like this engine. glow plug is medium @@TastyBRC
@@lukassslukasss1864 add me on mssger and send me a video I would like to see your engine running. Maybe I can help you. Check if your fuel tank and the fuel lines are sealing properly, this engine is very easy and consistent, I think you may have a airleak
wow! it Blasts! 😮
Wait for the modds! Sure it will run better
I liked the style of this video I like when people talk about how they feel about the engine great video my friend
Doing my best with my poor english! Thank you Bret
@@TastyBRC you have better English than most americans
@@TastyBRC hay bro know I didn’t paint it I can’t buy a xb9 body for under $100 over here it’s so bloody expensive I got this off a mugen line for $50 dollars
Fun engine overview Tasty 🎉
- Rod and maybe a set of bearing and she will last another couple gallons
- As you know, The carb is very important and Its good to over view these lower cost engines. That way we know for sure what they can do. By the looks of it, you get a good package for the money. ❤
Thank you A2, yes definitely needds and deserves a new conrod and new bearings, this engine is worth every $ it costs, but not sure the owner wnats to rebuild it 😕
@@TastyBRC That’s sad but, that is their choice.
- Is the engine discontinued? Can you get parts still?
- It is always tough to make the decision to rebuild. If anything, it is great fun and experience to do it. Even if you do not save any money.
Il est énervé ce petit moteur👌
Pas mal pour 159€ 👍👍
@@TastyBRC yessssss
nice ❤ first time iv ever seen another car at that track haha I thuat that was your back yard 😅
🤣I wish it was!! I usually work at week-ends that's why I'm alone at the track
looks a very nice engine for the money
Very Nice and should last longer than a trackstar or cheap alpha as this one has already 20L through it ans still runs strong and tune perfect
Merci Tasty B. Je viens de découvrir ta chaine. Ton test m'a décidé à acheter ce moteur pour le tester sur ma GT8. Je sais que ce n'est pas forcément le plus adapté pour le GT8 mais je l'ai trouvé à 143€ chez Imodel donc c'est une bonne base pour s'entrainer. Et comme tu as dit qu'il avait un bon top end, sans modifs ca devrait déjà me donner des perfs honorables.
C'est un bon moteur tu ne sera pas déçu. Il y aura forcément une difference de performances entre les moteurs TT et piste mais n'importe quel moteur TT conviendra pour une GT tant que tu ne vise pas un podium 💥💥
@@TastyBRC Merci encore. Tu penses qu'il y a moyen d'améliorer les performances de ce moteur en le modifiant (légèrement) ou cela ne sert à rien ?
Je vais bientôt pouvoir te dire ça, le proprio de celui ci me le renvoie pour être modifié. Mais dans tous les cas si tu accepte de perdre en bas avec un moteur TT tu peux gagner en haut ce qui conviendra forcément à une GT avec sa boîte 2. La question c'est, est-ce qu'il y a moyen de gagner partout?
@@TastyBRC Si tu as besoin d'un autre moteur pour tester des choses, je peux t'envoyer le mien. Bien sur, si tu es d'accord pour le modifier, je te paierais pour tes services :) Récupérer de la puissance en haut c'est effectivement tout ce dont j'ai besoin pour la GT2. Et avec un 3 ports plutôt que 5, j'ai l'espoir d'avoir une meilleure autonomie. Mais tout ceci est une longue histoire, le moteur est neuf, il faudrait mieux que je le rôde avant...
@@Zedsispeho je ne fais pas ça pour de l argent.. si tu veux que je le modifie ce sera avec plaisir. Ou après avoir modifié celui de mon pote je peux te dire ce que tu peux faire facilement sur le tien.
Awesome 👏 looking motor bro never seen one over here awesome looking crank bro great video 👍🫡🇦🇺🤜👏
Thanks Tony. Good entry level engine! The carb tunes awsome
Bonne vidéo 👍 Tu en penses quoi de ce petit moteur 🔥🔥🔥
Il vaut largement ses 159€! Très bien à mi et haut régime, pas top en bas mais je pourrais corriger ça avec un coude un peu plus long ou un autre combo échappement. Que ce soit pour l'entraînement ou début en compétition je trouve qu'il fera l'affaire.
Great engine for the price. A bit tame on bottom but mid and top are pretty good. Crank counterweight design is looking better then some higher priced engines...(with handpainted coolinghead)😆 deffinitely replace the conrod ....and bearings too. Sure it will give much more gallons of fun. Great vid again buddy 👊
Yes Kings very good for the price! I wonder if that crankshaft would fit my dusty, pretty sure it will tune better 😆Definitely deserves new bearings and conrod!
perfect clean champ😁👌
The cooling head looks cool and is it normal to have still some pinch after 5 gallons or is that very good?
To really understand if the pinch is still ok, you have to know what it is like new.
Also, checking to see if the piston skirt doesn’t go higher than the exhaust port, is a true indicator of good pinch.
- If it goes above then, the sleeve is near the end of its usable life.
Pinch could have been better after 5 gallons
Really nice for a entry level engine. Kind of reminds me of the Taiwan RB’s they all were pretty good engines. But they just fell out of favor when they started making them in Asia.
Exactly, RB where very popular when they were made by Novarossi, very expensive too!! Then Rody Roem sold RB Engines .. Now he created VS Engines wich are made by O.S. but not just rebranded O.S. engines, they are made wtih Roems specifically designed crankshafts and based on the 21XZ-B 5 ports, wich are nowadays only made for his engines!!! Very interesting stuff, maybe my next black friday engine 😁
Hello brother! Sorry for my disappearens... i will come back with new projects!!!😊
Sakis my friend! Where have you been?? Thanks for stopping by 👍
Franchement ce petit moteur a l'air bien jai l'impression qu'il marche mieux que certains moteur plus chère et que dautre marque plus réputé. Tu pense que niveau performances il est équivalent au reds 521 sport ?
Il marche très bien pour le prix et je le sais durable et qualitatif. Le 521 est mieux, plus équilibré le b213 est très creux en bas, en vitesse pure c'est surement très similaire mais le 521 a une meilleure courbe de puissance
@@TastyBRC ouais on l'entend que en bas il galère un peut mais en haut il envois après entre le 521 et le b213il y a une grosse différance de prix. tu conseille quelle ligne pour gommer un peut le manque en bas avec le b213 ?
J ai testé différentes lignes, ma ligne qui me donne le meilleur couple, la 2135, sur la dernière vidéo ne suffit pas à compenser son manque de couple mais ça reste la plus appropriée pour ce moteur.. sur la dernière vidéo je roulais aussi sans venturi. Je vais en recevoir un neuf bientôt, qu'on m'envoie pour être modifié. Je vais essayer d'améliorer le bas régime. Vidéo détaillée à venir ✌️
@@TastyBRC ah cool tu pense qu'avec la venturi sa sera un peut gommé ? hate de voir la vidéo alors
It looked like it's got a nice linear powerband but not too powerful maybe try a different pipe set
Yes, thats exactly what i need to do, try a different pipe or at least a longer header
Impressed with the internals to say the least , the engine has a spike in power transitioning from low to mid and high end is ok in my book … the pipe can changes everything . I’d like to get my hands on one of those to try and smooth out the hit and squeeze some more high rpm pull out of it . Did you play w shims ? If you tighten her up she will have much more snap when you jump on the trigger. I just finished an Alpha .23/Gt-R Hybrid and ended up running .10 under the sleeve and nothing under the button lol . She came w .30 stack but .1 in total was the magic number with 30%/10% nitro . I didn’t get to test 30/8 as I have moved onto a Max Gt-Rx for testing .
Yes it's looking very good, 159e, 170$ you cant beat that! It will definitely run better with a pipe like the hipex 2135 or that iealsi 2186 but didnt tried, I only burnt 1.5 tanks as this engine is not mine, the conrod is pretty worn out, I dont want to kill it!
Did I read well, .10 under the sleeve on 0 under the button head You like them tight for sure😆
hey Taste B I live in Europe just like you and I can't buy nitro with a high percentage of content if you don't race on circuits etc etc, my question is the following, do you think it is a waste of money to use low nitro content in big blocks? Another, it is the first time that I have a big block big red .28 and it consumes a lot of nitro, I had an Os21 TM and the difference in consumption is abysmal, what do you think about these variables that I am explaining to you? Are large blocks in Europe worth buying? sorry for the long message..
Any engine will run with low nitro fuel but not any engine will run and tune GOOD.. Some engines like it, other dont, my SH28 8p was not tuning very good with low nitro fuel but from what I hear your big red is running pretty good!!! As long as the temp is good, bash it!
And yes those bigblock engines suck a lot of fuel, the OS21TM is much better IMO than any bigblock currently available, you will always get a much better fuel mielage with a .21 and most race .21 will outperform a bigblock engine
Where are you located??
I from Spain, thx for the reply and the subscription ❤ u have a wonderfull channel!! 👌
@@Rc_Revo-Nitro_Andalucia Thank you! An d you live in a beautifull country, I spend my Vacations in northen Spain every year
Salut my friend 😉
Mais t'as combien de moteur ??😂
Salut Hervé. Beaucoup mais celui là n'est pas à moi
@@TastyBRC Ah ok 😉
Where can I buy that engine?
Here in France its available @ RcTeam. Com, iModel. Fr, and a couple other shops.
What glow plug do you run it ?
O.S. P3 ?
Its the stock no name glow plug! Still tunes very well
@@TastyBRCJust bought this engine, what exhaust would you recommend using ?
You wont be disappointed ! Thake goog care of it, temp, preheat and it will last very long. I definitely recommend the hipex 2135, this pipe will help a lot at bottom end power
So i bought pipe, basically i ran about 1.8l of racing experience break in fuel and engine refuses to run cold it stays always 140° and goes even higher, in manual says temp over 130° much shut off, and there's bubles in fuel line near carb niple, i don't understand too. in my eyes i don't like this engine. glow plug is medium @@TastyBRC
@@lukassslukasss1864 add me on mssger and send me a video I would like to see your engine running. Maybe I can help you. Check if your fuel tank and the fuel lines are sealing properly, this engine is very easy and consistent, I think you may have a airleak