Numatic George Car Cleaning Demo & Set Up For Wet & Dry Use
Vložit
- čas přidán 5. 07. 2024
- In this video I show how you set up the Numatic George for dry vacuuming followed by a demonstration of the cleaner valeting a car. I then demonstrate how to convert George for wet cleaning and deep clean the car mats, carpet and seats using the small shampoo head.
- Jak na to + styl
What a brilliantly clear demonstration of "George".. Thanks
By George, I think I need to buy George! I was thinking Rug Doctor Blue after watching another of your videos but gosh by golly that may be folly. Excellent presentation!
Ive got a george and this is how I deep clean car carpets. Vacuum first, dilute carpet soap with water in a sprayer. Spray solution onto carpets. Brush the fibers with a light stiff brush or drill brush. Then run only hot water no soap in your george or other extractor and extract the carpet. This will at least rinse out the carpet solution from the fibers, leaving no soap residue which can attract more dirt. Do many dry passes no spraying just vacuum to take out as much residual water left in the fibers. Enjoy clean carpets👍
Can you run hot water on george or just warm?
The instructions say that you should only use cold water....
@@doonhamer74Trouble is, cold water doesn't get the dirt, stains and germs out the carpet. 60-70 degrees is best and I usually use 60 degrees with George in order to properly clean and sanitise the carpet/upholstery and I've never had a problem with it.
@@RJA_World how long do you use george with hot water? How long it lasted?
@@MrDoubleD93 I don't use it too often but when I do it's big cleans, full flats ect. It's lasted me nearly 2 years with no issues. Despite Numatic's recommendation of only using 20 degrees maximum, that won't get the dirt out. It has to be hot.
Nice to see this, thanks. That's how i was going to do it, per the instructions, but it's great to see it happen in reality too.
Well explained. Thank you very much
I have watched you all my life my first channel ever to watch
Hi after you went over to extract the cleaning detergent from the seats / car interior how wet and how long did they take to dry ?
Great full review...thank you.
Love it 😍
I have such problems with the hose connection. Keeps coming apart. Should the green ring part of the connection be stable? Mine seems to pop out. I can’t figure out how it stays in place. At least with help of your video we managed to do most of the flat. Thanks so much! The instructions are pretty useless.
Fab video! Will the turbo pet brush fit onto the George model? I intend on presoaking it and using the pet brush to agitate the dirt before sucking it up
You can’t use the turbo brush on wet or damp carpets, it is intended for dry use only. It would fit the George but it probably won’t last long if you intend to use it as you described.
@@ibaisaic okay thanks for letting me know! I shall only use it for dry uses 😊
Are these really worth it gonna prob buy one soon between this and the vax cant decided and i see wd6 also but looks bad tbh
Keep up there good work on here mate am big fan of u do a rally good job on here
Did you manage to extract enough water from the seats? They seemed to be taking up water like sponges, which effectively I suppose they are - foam seat pads and cloth cover
You won't get a better domestic extractor than the George/Charles. They really are excellent, so I imagine Roger went over the seats a few times until he was confident he couldn't extract any more water from them.
I had a vax 6131T for years it recently blew up after 12 years but I want to know if this is easier than a vax as it’s like an actual work out 😩
Hi Could you do a car cleaning video with Thomas Aqua plus pet and family vacuum?
Thank you so much
I have a Rainbow Systems but I think it is made for the hands of big people so sweat a lot using it. This looks easier. Can you also wet mop floor with this?
Yes, this model comes with an attachment for washing floors.
@ 16:00 Rug Doctor rental: utility tool for upholstery, stairs, and car interiors(not the exact same as the original tool, with a longer hose, nor a separate brass solution tube connector, and no mesh storage bag, either.
Very useful - knew it had this functionality but didn't have a scooby how to use it... and now do. 😊
Can you use it without a bag for dry vacuuming?
I love the red interior of your beautiful car Roger what kind of car is it look fancy
Hi, I have a question. I understand “Henry Wash” is a cheaper version of the George? But can I use the Henry wash for dry cleaning? If I have my own attachments from my Henry HVX200. The filter, the bags and pipe? Or is the Henry Wash strictly for wet cleaning only? Because if a Henry wash is just a George without the dry tools then I may as well save £50 and just get the Henry wash
The Henry tools will fit a Henry wash as will the dust bag, though you can buy bigger bags to fir the Henry Wash. As long as the filter fits Henry Wash then you can convert it for dry cleaning. At the most, you may have to buy a George dry filter if the Henry one doesn’t fit.
@@ibaisaic thanks so much 🙏🏼 just saved me £50 and a bag full of tools I already have.
George is my favorite numatic vaccum
Mine is henry
Just bought a George, but the hose attachment to the nose keeps coming out, the instructions are just pictures, is there meant to be a piece that threads on the outside of the nose part? This one slots in but isn't easy to do....my carpets are still quite damp, after watching your video which is brillliant and informative, I'll go over them again tomorrow to dry them some more.
The hose fitting is a bayonet type. The threads on the outside allow you to fit a regular screw in Numatic hose. I don’t recommend the George for carpet cleaning as it’s not very effective, but it’s great when using the small washing head.
Great tool but Numatic really dropped a ball when they did the recent "facelift" on George. While they were at it they should have replaced that next to useless carpet fishtail thingy with some sort of rotary brush like the Vax Spinscrub. I actually adapted a Vax Spinscrub head ( N.L.A. sadly!) to fit onto my Geroge and it's way better. Cleans the carpet better and sucks up the dirty water better too.
Hi roger I have a numatic George it is great for valeting my customers cars but when I spray the solution onto the carpet it only sprays out one side of the carpet jet
I suggest that the jet may be partially blocked. Try clearing it with a pin.
Have you ever done a suction test on george? I dont think i've ever seen one done...
Any reason you havn't?
Excellent machine! Wish I had one.
just build ur own
Does your machine get really hot?, i got a brand new unit couple days old and it turned off on me first day of use, came on again after it cooled down stayed on for like 5 minutes ish turned off again :( i've noticied theres like some foam in the air intakes guess thats for dust could that be a reason why it overheating?
No mine does not get really hot. If a vacuum cleaner overheats and cuts out it is normally due to a restriction in the airflow causing the motor to get hot and activating the thermal cut out.
Mine does that as well, did it out of the box. I just don't use it for dusting, I hoover, then while it cools I dust. When it cuts out it can take an age to cool and reset.
@@dlarge6502 i ended up getting a replacement unit
The new George has its switches at the front instead of the back
Thanks for the video ! 😃
realistic!
I want to know if there's difference between George and Henry
George is also for wet cleaning, and Henry is only for vacuuming
How long does it take the seats to dry ???
Depends how you treat the fabric seats/carpet but it normally takes a couple of hours without proper ventilation plus you have to consider the weather too.
how is the dry vacuum bag emptied?
It is not emptied, it is supposed to be replaced with a new bag when full.
Do You Know There's A Even Newer George On MyHenry And Now The New Georges Have The Switch's On The Front And Also In The Charles.
Yes, I mentioned them in my latest Numatic video.
@@ibaisaic YOOO You Replied To Me?!
@@ibaisaic The Dirk Muller Henry 180 Plus
How's the quality? Does it feel sturdy all and all?
It is sturdy and seems well made.
They're sturdy i dropped one down the stairs only got a scratch
If they added an agitator into the head, it would be the ultimate cleaner.
It's 35ml per every litre of cleaning solution 😊
Very clear instructions thank you 🤩
Do you drive car?????
What car do you have
I don’t have one but I am chauffeured around in the back of a 7 seater Skoda Karoq.
Very nice 😊
No rotating buses to agitate the carpet so you are just spaying water on and sucking it out
Wait… what? Your car has ‘hardly ever been vacuumed’?!? The car is one of my favourite things to vacuum: lots of nooks and crannies, ample opportunity to use a dusting brush on the dash and console, heavy duty muck and grit to scrub out of the boot! It’s a proper vacuum cleaner workout!
It’s not my car.
I have the same one but mine was Christmas 2020
Ah! Missed that, obviously wasn’t paying attention!
Really good job, the colour of the extracted water says it all. I follow The Detail Geek, a Canadian car valeting specialist for weekly pressure cleaning, vacuuming and extraction action. His preferred method for extraction is to use a pump sprayer to apply chemical manually then use a cordless drill and brush to agitate quite thoroughly, then he uses the extractor with just water in it - no shampoo - to ‘rinse’ the carpets and seats, leaving as little chemical residue behind to become sticky and attract resoiling. He used to use a Bissell spot cleaner but recently upgraded to quite a substantial commercial extractor. Not suggesting our beloved Ibaisiac is doing it wrong, but I’ve used a Vax on carpets before and in my experience the resoiling means you’re stuck shampooing the carpet more regularly… I’ve seen other carpet cleaning videos and rug cleaners too, who apply shampoo, agitate with a single disc machine or counter-rotating brush machine, then just use water to rinse and an extractor to just remove water.
@@robdavis5711 Professional cleaning companies will use guaranteed hygienic methods and not residential shampooers. For your average Joe, as long as you don't live like a hippopotamus, shampooing with a standard cleaner will do fine. If you just picked up a used car though or you have a filthy nasty car, then I would rather use the professional method. Also doing the pre-app with a pump sprayer and manual agitation and only using the shampooer for hot water extraction will save your shampooer tubing from rotting out anyway (the chemicals in the shampoo left sitting in the lines will chew up the rubber). Tubing can be replaced anyway, but you know, it's a couple hours of work to replace all those lines so rather not make it a frequent job.
Fiat panda
Panda seats are probably the worse material you can ever find
Probably a better material than cheap toilet paper that you put your finger through when wiping your bum. My 80 year old mother seems happy with her Panda.
Ok for the diy amateur valet car enthusiasts
But these are poor results compared to a pro machine..
So what machine do the Pros use?
Nothing wrong with George. He just did it wrong. You're supposed to apply cleaner using a pump sprayer, agitate with drill brush, then extract with the vacuum filled with hot water only. Still did an okay job despite this.
Dd😂😂😂❤ I se io😢😮😅