Video není dostupné.
Omlouváme se.
Everything Presence Lite: Prepare to Have Your Mind Blown!
Vložit
- čas přidán 17. 08. 2024
- In this video, we're going to take a look at Everything Presence Lite, a new smart home device that has a lot of features. We'll discuss Zone detection, which is the feature that allows you to identify different areas of your home, and see the different things that are happening in each zone. We'll also take a look at Presence detection, which is the feature that allows your devices to communicate with each other and see if someone is currently in the room.
If you're looking for a new smart home device that has a lot of features, then you need to check out Everything Presence Lite! It was developed by Lewis from Everything Smart Home. This sensor is smaller than the Everything Presence One but has one amazing feature extra. It can detect people in zones!
⭐ You can download the blueprint that I created for this video at: ko-fi.com/s/e6... ⭐
Links referred to in this video:
* Order the Everything Presence Lite: shop.everythin...
* The manual on how to install and use the blueprint can be found here: www.smarthomej...
Blog version: www.smarthomej...
⭐⭐⭐
* Join this channel to get access to perks: 📺 / smarthomejunkie
* Please consider becoming my patron 🏅 at / smarthomejunkie
* Or please support me by buying me a ☕ at ko-fi.com/smar...
⭐⭐⭐
⭐ If you want me to create a review of your product, please visit this page for information and rates: www.smarthomej... ⭐
⭐ I offer Consultancy and Training for your Home Assistant setup. Visit this page for more information: www.smarthomej... ⭐
My Devices: github.com/sma...
Instagram: / smarthomejunkie
Twitter: / smarth0mejunkie
Facebook: / smarthomejunkie
TikTok: / smarthomejunkie
Discord: / discord
Music by:
* 2TECH-AUDIO: 2tech-audio.ba...
00:00:00 Introduction
00:00:59 What's in the box?
00:01:28 What mmwave sensors are supported?
00:02:05 Comparison between the Everything Presence One and the Everything Presence Lite
00:03:29 What makes the Everything Presence Lite unique?
00:03:55 Explaining Zone detection using the Everything Presence Lite
00:04:04 Explaining the Blueprint to detect presence in zones
00:04:55 What does the Everything Presence One cost?
00:05:19 Conclusion
#presence #presencesensor #presencedetection #everythingpresencelite #homeassistant #review #smarthome #homeautomation
⭐ You can download the blueprint that I created for this video at: ko-fi.com/s/e665920ee7 ⭐
Links referred to in this video:
* Order the Everything Presence Lite: shop.everythingsmart.io/
Blog version: www.smarthomejunkie.net/a-first-look-at-the-everything-presence-lite-amazing
⭐⭐⭐
* Join this channel to get access to perks: 📺 czcams.com/users/smarthomejunkiejoin
* Please consider becoming my patron 🏅 at www.patreon.com/join/smarthomejunkie
* Or please support me by buying me a ☕ at ko-fi.com/smarthomejunkie/
⭐⭐⭐
Thanks Ed! Glad you like the Lite, can't wait to release it and for everyone else to try it soon! 🎉
Thanks for your kind words Lewis! It was really fun to play with the EPL.
This is a rarity for me, but I happened to have a few extra dollars - As soon as I saw the multi-zone functionality I immediately bought one (though looking at shipping, almost wish I had bought two...)
I just redid my kitchen, and I'm hoping I can use it to trigger under-cabinet lighting for different sections of the counter. If this works like I'm hoping it does, this will be a dream!
I'm also wondering if it's possible to have it act as a security device, if you could have the path of a target overlaid on a floorplan (or even just the current position)... I might look into ways to do this, as it would be a far more comfortable solution to security cameras in the house. No matter what, thanks for your work on this, cheers!
@@SmartHomeJunkie Can we get multiroom support if we change mmwave of EP1?
Great work as always, just a quick question. Why is it the EP1 doesnt have zone controll? i have a room that is 6m x 6m so i would need the detection of the EP1 but i also want the features of the EPL
@@jackofalltrades4091 The mmwave sensor in the EP1 only supports distances and not X,Y coordinates.
Fantastic video showcasing how this sensor works! I do think it’s really important that you’re upfront when companies (including small ones that don’t feel like corporations) send you stuff (especially when it’s not released to the public yet). Being sent stuff can still influence your review even if you’re not paid for the review. I’m not saying this is a dishonest or disingenuous review, I just think it’s good to be fully upfront with the viewers when doing reviews.
Great content and analyses Ed. Cheers
Thank you 🙏🏻🙏🏻🥰
EP1 picks up my cats walking on the floor and I have it mounted pretty high on top of a china hutch
Your cat is gorgeous! ❤
Thank you!
I may have missed something but what is the communication method? Bluetooth/wifi/etc? Also, any thought how well this would work on the ceiling? when we build our house i ran wires to each room to power and communicate with a pir/glass breakage combo unit but this would be much better. thanks
It's WiFi through ESPHome
What do you think? 'Hang' the presence light from the ceiling angling downward to view the room. Thoughts? Thanks!
can i make a request you show how you setup a zone in detail please
You can use my Blueprint to set up the zones.
I have and use the original presence 1. Also use the Aqara presence sensor. & have no use for any more. But will try the Blueprint. Thanks.
The blueprint will not work with the EP1 and the Aqara FP2.
My EPL as arrived. so will see how it does.
Good Job Ed 👍
Thanks 👍
The sensor was never expensive, but the shipping cost double the price, completely destroying the value for the price ratio
True. All thanks to the Brexit.
Hi Ed. If you look at this sensor and the Aqara fp2 without looking at the price but just how it works. Which one should you advice? I do use the Aqara fp2 now for 2 week and i am very pleased with it. I use it in my livingroom of 11,6 meters deep and 5,5 wide I use 5 zones and all works fine. I hope you have advice. The difference in price of 83 euro compared to 29 euro's is a really good deal in my opinion.
My experience is that the FP2 works better for larger rooms. Also it works better when approach it at a small angle.
hi ed do you have blueprint for the Aqara fp2 to turn lights on in each zone ?@@SmartHomeJunkie
How long does it take before it turns on the lights? Was it really the 3 seconds it looks like? Or are the zone just so small that it does not respond before you are almost standing on the table?
It depends on how the zones are defined indeed. The severity does not respond as fast as the EP1 with the PIR sensor in it, but most of the time it's between 1 or 2 seconds.
Will the STL file for the case available so I can print it at home and only order the harware?
I assume zones is just a software thing (esphome code). According to spec sheets of the DFRobot sensor used in the EPOne, it can do areas. just needs to be configured. Therefore EP1 and EPLite have same functionality (or should... I would hope that they will update the code for the more expensive EP1 for those that have purchased one).
Zones is a software thing, but the EP1 hardware cannot detect X and Y coordinates, therfore it cannot detect zones.
@@SmartHomeJunkiemaybe i misunderstood the data sheet, but looks to me it can detect movement in zones, and you just need to use software to detect motion direction (movement from one zone to another).
@@marcusone1 Unfortunately the EP1 can only detect distances and no X and Y coordinates according to Lewis.
How do these compare to the Aqara FP2?
The FP2 has a longer range and detects people at a smaller angle.
@SmartHomeJunkie: Bought the Blueprint, but have some issues. 1: When you say "top-left" and "bottom right" do you mean left as seen from the sensor, or left when standing in the zone looking at the sensor? 2: It looks like i HAVE to define all 4 sones and 4 lights in the blueprint, even though I only want to use 1 or 2 zones. That means I have to define a zone (albeit a very small one of something like 6000 and 5999) and a light or entity that will be turned off/on for the zones I really don't want. If something by chance enters that tiny zone. Any chance of making the blueprint not need to be completely filled out?
First of all, thank you for your support! You can just fill in 0 for zones that you don't need. Top left is indeed seen from the sensor, but I created a fallback scenario so that all coordinates should work regardless how you look at them. Let me know if it works for you. It's not possible to create optional fields, but setting them to zero means that the zone is the device itself which shouldn't give you any problems. I only use the zones myself and set the fourth to 0. If you have any questions, you can also contact me on my discord server. I'll be glad to help you out.
@@SmartHomeJunkieThanks for the reply! I’ll give it a try tonight or tomorrow. :)
@@SleepySleepy500 Let me know if it worked for you!
as far as i see from the github releases (but dont have one sadly) the ep1 have in meantime target tracking up to 4 persons, correct?
Interesting - thank you! Did you (or can you) measure the power consumption? My current PIR sensors are battery powered, are mm-wave sensors generally not battery?
Yes, they are not battery. I believe because they are constantly scanning which needs constant power.
Hey, EPL is already listed as sold out on Lewis' website. How do I get a hold of one?
It's not released yet. It will be released in the next couple of days. I mentioned it in the video.
Hi. You also like the Aqara FP2. The FP2 is trash--I have 3 of them and they all have ghost issues to the point it’s unusable (still after so many updates). Does this sensor also detect static humans or is constant motion required?
@@soundneedle It detects static humans because it's mmwave. And I do not have issues with my FP2. I use it for months now without any issues. No ghosting issues here as well. It did take me some time to set it up perfectly though.
@@SmartHomeJunkiei’m guessing it’s gonna be released on the anniversary of the EP1 which i think is the 12th october
@@Littlecheez17 Lewis told me it will be released somewhere this week, so you might be right!
I’m struggling to get mine to keep the occupancy on. It’s in a 5m sq room facing inwards but doesn’t seem to pick anybody up if they are sitting down on the sofas - which are about 3m away. Any thoughts?
What's the maximum distance that you've set in the settings of the EPL?
@@SmartHomeJunkie 6000 as this is the max it allows - that’s on zone 4. Where we sit is zone 3 which is 3500 max
Sorry, max is 6000 - ignore the zones 🙄
@@DementedDog I'm not sure why this is happening tbh.
@@SmartHomeJunkie yeah it’s odd. Occupancy is detected but the other ‘occupancy’ entity shows as ‘off’
Will the EP1 support zones? If so, do you have an idea when? Thanks!
No, it won't. The sensor in the EP1 cannot handle it.
Just got the Athom one.. quite nice. My question is, since these all use espresence espressif and some mmwave sensor, what's preventing us from flashing the presence lite code and replicating its magic..
Btw I got 2 presence lite ordered
No idea really. Not sure if your other sensors are esp devices.
@@SmartHomeJunkieAll of them are indeed esp devices
@Ed Can you please do a video on how to setup the zones - especially how to get start x and y , end x and y coordinates?
Open the settings of the EPL in HA on your phone and walk through the room. You will see the X and Y coordinates of your location in the room in the settings of the EPL.
Thank you for fast reply. I know where i can find X and Y but does not understand how i use these values to map an area. @@SmartHomeJunkie
@@fredamn76 I am busy writing a manual about the blueprint. Will let you know in a post when it's finished.
Sounds good@@SmartHomeJunkie
@@fredamn76 The manual can be found here: www.smarthomejunkie.net/everything-presence-lite-blueprints-manual/
Still not available for ordering.. can you check with the seller ?
It's sold out again. You might have missed it.
@@SmartHomeJunkie I activate a notification when it is available, never received ... any idea when it is availabke again?
@@hansvanwoudenberg3248 I think you can ask Lewis when it's available again.
I would like to know if the lite or es1 works with hubitat?
I cannot help you with that question. Sorry.
Any idea of any batterypowered devices that Can deliver the same?
They will not exist because of how mmwave works.
My cat kept setting my lights off with the EP1 so I shot it!!
Did you shoot the cat or the EP1?
Does this sensor require home assistant?
Yes, it requires ESPHome and Home Assistant
@@SmartHomeJunkie Thank you. That leaves me out. I'm not looking to invest in another platform. Thanks again.
Still looks pretty janky though :( Someone really needs to put something like this in a sleek housing that can be mounted in the ceiling like a downlight if they want to make it in to more homes.
It’s been sold out for months
Still sold out :(
JOHNNY 5 IS ALIVE.
🤷🏼♂️🤷🏼♂️🤷🏼♂️
@@SmartHomeJunkie you look just like Fisher Stevens from the movie Johnny 5
@@joejoe6949 I see it!
Way way way too expensive.
Really? Other similar sensors are twice the price.
In comparison to what?
too expensive for a smart presence ...
Most (not DIY) alternatives are twice the price as far as I know.
@@SmartHomeJunkie what do you think about Sonoff SNZB-06P ?? best price i think
I like this video, it give's a high level overview of the EPL, the mention of a Blueprint sounded good, wow something to help me workout how to operate this cool device. Being the first time i've paid for a blueprint (Normally it's a community sharing this, well that was HA's intention) I had high expectations for the blueprint. I'm normally a positive kind of person, however after paying for the Blueprint and implementing (better words "Tryed to") the automation, I came out of that process quite frustrated, annoyed and with a automation that failed to use the EPL to simply turn on a light.
Perhaps I got this Presence detection all wrong, thinking I should just stick to using a simple Motion detector and timeouts like I currently do. The main issue I don't understand are these zone X & Y positions. I was hoping the Blueprint readme would explain, but nothing in there helped at all, and the video just summarised it, saying add entries, numbers to "Enter the Top Left X position for Zone 1" etc etc etc. WHAT Numbers? 1, 2, 2000, 4000 etc etc etc. found some details in this chat allude to using 0 for "not used", also found some data regarding -4000, 4000 even max 6000. How does one workout the entries? even an example room like the one in your video with the numbers you use for the various zones in it would help. I get it you understand this, you built the Blueprint, however newbies to this Presence detection and zones like me are lost.
Please help.
Thank you for this valuable feedback and your support by sponsoring me. I will create a more clear manual in the upcoming days. The blueprint has more than 1400 lines of code and took me a lot of time to write. This channel is my livelihood, and to make it sustainable I need to ask for a small sponsoring fee. You get the blueprint in return for this. The values need to be in millimeters. You can see the X and Y coordinates of your location in the settings of the EPL in HA. This way, you can figure out what the X and Y coordinates are for your zones. I suggest you walk through your room using your phone and see what X and Y coordinates the EPL returns.
You can also use the EPL as a normal presence detector. In that case you do not need the blueprint.
The manual can be found here: www.smarthomejunkie.net/everything-presence-lite-blueprints-manual/
THANKYOU, This is very helpful. Love the room example.
@@user-pm3mz6wk6p Great. I hope this helps. Let me know if you run into any issues with the blueprint.