Batteries went dead in the remote the bed quit working it returned to flat and the remote was disconnected from the control box how to re-sync the remote to the bed
I seriously owe this guy a beer!! I was getting ready to spend $150 on a new control box and $120 on a remote. Can across this video as a last ditch effort and it actually worked! Took a couple tries so don't get discouraged if you don't get it on the first go. Thanks so much!!!!
Literally 3 weeks of sleeping flat because the directions say push and hold the button under the bed and hit head up feet up .. WRONG!! YOU SIR got it right and I thank you !
Oh my goodness. I was at my wits end and then found your video. I could not find my paperwork. I called Nectar and they were of no help because they needed information I could not provide, since I could not locate the paperwork. Thank God for your video and I totally understand the like a car accident comment. Lol.
Thank you! Bed's feet went up in the air sometime in the middle of the night. My poor dad couldn't figure out how to get out of bed! His bed is probably 30 years old, so wasn't expecting it to be such an easy fix as re-pairing the remote. Honestly this video is a God-send. Thanks again...
Oh sir! You are a prince among men! I looked all over. I have been " flat" for days! Now, I can breath at night! God bless you! My second grandchild will be named after you.
Thank you so much for this info!, I have been watching useless videos for months! My bed is brand new, and I could not find a fix anywhere, so for the last five months it’s stayed flat… until I found you!
Thank you! I kept trying the foot and head up, no beeps... When I saw your video, I remembered by brochure that came with the bed looked exactly like that, except I dont know where it is. Head Down plus Foot Up, and I heard the beep. Everything is working again. Thank you so much for posting!!
Thank you SO much. Spent hours yesterday trying to get it to work and all the information I found online was saying to hold the foot and head both UP, not one down and the other up. I was already resigned to purchasing a new control box, thinking mine was fried, but thankfully I couldn't actually find my model control box anywhere. Tried your tip and was delighted when I heard a resounding beep. Everything is working again.
Sir!!!! You have saved my back and I from a second night of painful sleep!! My remote stopped working yesterday and we have been tried everything that every video suggested. I even found the owners manual for my Craftmatic Legacy adjustable bed and follows its instructions….nothing. I called Craftmatic’s customer service several times…nothing. In a last ditch effort, I stumbled across your video. We followed your instructions and my bed quickly started to move!!!! Thank You so much for your help!!!
❤❤❤❤I thank you so much for this video❤❤❤our bed died in the up position. Unplugged then it went down and wouldn’t move. We have the analog system and it worked.
Awesome dude you fixed my problem also I was doing both up on the remote and then you said 10 to 15 seconds I try that it didn’t work…. until you showed in writing the instructions it dawned on me …..thank you thank you thank you
This video has been the only one that clearly explained the steps to take that successfully worked to re-pair my remote to my Nectar's adjustable frame. Worked like a charm! Thanks so much for making this video!
I had the same issue. I couldn’t find the instructions and I couldn’t find anything on the internet. I happen to have the same remote and control box as yours. After watching your video it works again. Thank you!!!!! I thought my bed would never work again.
We bought this bed for our mom and it just stop working out of now where, we couldn't find any paperwork on it so we tried everything and nothing worked so after months of nothing we bought her a new one but I took her old frame because it was still like new. For some reason I started looking up information on the bed today and came across your video and IT WORKED! Thank you so so much.
Thank you second time this happens to me and your video helped me remember, just a slight difference I don’t know why, on mine I have to press both up buttons and at the same time press and release the decoding reset button and we are good to go 😅 thank you
I was literally lying on the floor, half under the bed so I could reach the control box, at my wits end. I watch about 20 vids until I found yours. Syncing worked immediately! Thank you, thank you, thank you!!!
Thank you Ed. Out of the blue, my remote failed to flatten out my bed. I immediately went on to You Tube, and voila!! I found your video, followed your directions, and was back in business. Whew!!! Thanks again 😁
Omg can I just say thank you, thank you, thank you!!! I had tried everything. Haven’t had this thing working for months. Came across your video and bam, fixed within 30 seconds. You are a lifesaver! I also couldn’t find the directions that came with it, so was going by the ones linked to the product on Amazon where I bought it and nowhere in those directions does it say anything about syncing the remote this way. They really need to fix that! Anyway thanks again for sharing!
Thanks. This worked for resyncing the remote of the adjustable bed I purchased from Sams Club 4 years ago. First time I have had a problem with the bed, and of course I couldn't find the manual that came with it, lol. Thanks again!
Been looking for instructions for 2 days when I lucked up on your video.. Thank you so much!!! FYI if trying to pair two twin xl (split king) mattresses reverse the settings for the second mattress. Hold the head down foot up simultaneously. All smiles over here!!
Thanks for posting this video! We never would have figured it out on our own! I do want to add that pressing the remote buttons and the button on the box underneath the bed should be done simultaneously. 🙂
Thank You for your excellent video! We bought a "retuned" split-king from "Mattress Firm" with a dead remote. Your instructions were spot on to sync the free replacement remote.
Thank you so much for this video! We had the same problem and couldn't find anything online. Your video helped and now our remote is once again synced to our adjustable bed frame, working like a charm!
Excellent video. Only one I could find that helped. Key point not on the directions. You have to push the reset button while you’re holding down the head and foot buttons. Remote beeped and synced. Spoke to support and told them to add that little point to the directions.
Nice thanks! I tried several other suggestions and was about to give up. But they were all saying press up on the head and up on the foot. Never worked. Yours got me going!
Thank you!!! Your video as the only one that was correct. I watched 4 videos that said to hold both buttons up, did not work. You made my 87 year old mother very happy.
This video saved me three times now! Thank you once again! I'm hoping since I put new batteries in the remote this time that I won't have to re-pair it again for a year or two
Thank you so much for sharing this. After numerous calls to the company I purchased from, and receiving no help, I watched your video. You solved my problem.
oh my gosh, thank you so much for your video. My remote just stopped working 3 months ago and I have been looking for help, but with no success until I came across your video.
I had mine for 5 years and I have lost the paperwork and was getting ready to buy a new motor thinking that was the problem. Thanks to your video I fixed it. Thank you so much!
Thanks for posting this. I couldn’t figure out what to do. I thought I might have to buy a new remote. Your video was a great help. My remote works just fine now.
Thank you SO much for making this video! Whew! I would have never found the button under the bed. Now I can rest again. Thank you, thank you, thank you!
What I did was I unplugged it from the wall for 10 seconds then plug it back in and I held the head up button in the foot up button for two seconds and then reconnected it works!
Thank you so much for this information! My battery died last night and when I switched the batteries it would no longer work. I could not find anything on how to sync this and then luckily I tried youtube and voila! thank you for the information.
We have a split frame and need to sync both of the black boxes to the controller. Waving the camera over that paragraph is not enough. You could have minimized the "talking head" portion, and spent more time, zooming in on the page of the manual.
Thank you for your video it was the help I needed. Also for anyone that is trying the instructions without any luck like I was the secret was taking a pencil /pen and pressing the button under the bed. I was doing it with my finger without any luck u til I took a pencil inserted after. Also if you are doing both beds sinc to one remote like I was once you have one side working you disconnect the one that works and do the same for the other bed once that one now works connect the other side and voila both sides are since to one remote. Hope it helps
Great video, thanks for posting. Most informative one I found yet… it’s been hours and I have not been able to get mine to work. Really hope I’m just doing something wrong, the bed frame is not even two years old. Would appreciate any help. Thanks
Nice to know... The Head Down button has quit and it appears that these remotes are permanently sealed. Battery leaked years ago and one of the plated through holes in the PCB has finally corroded enough to open the circuit. Will have to cut the case open to gain access to the board. A quick look on-line shows the price for these remotes to be insanely high. :
I seriously owe this guy a beer!! I was getting ready to spend $150 on a new control box and $120 on a remote. Can across this video as a last ditch effort and it actually worked! Took a couple tries so don't get discouraged if you don't get it on the first go. Thanks so much!!!!
Literally 3 weeks of sleeping flat because the directions say push and hold the button under the bed and hit head up feet up .. WRONG!! YOU SIR got it right and I thank you !
Oh my goodness. I was at my wits end and then found your video. I could not find my paperwork. I called Nectar and they were of no help because they needed information I could not provide, since I could not locate the paperwork. Thank God for your video and I totally understand the like a car accident comment. Lol.
Thank you! Bed's feet went up in the air sometime in the middle of the night. My poor dad couldn't figure out how to get out of bed! His bed is probably 30 years old, so wasn't expecting it to be such an easy fix as re-pairing the remote. Honestly this video is a God-send. Thanks again...
Oh sir! You are a prince among men! I looked all over. I have been " flat" for days! Now, I can breath at night! God bless you! My second grandchild will be named after you.
Thank you so much for this info!, I have been watching useless videos for months! My bed is brand new, and I could not find a fix anywhere, so for the last five months it’s stayed flat… until I found you!
Glad I could help 🌹
Thank you! I kept trying the foot and head up, no beeps... When I saw your video, I remembered by brochure that came with the bed looked exactly like that, except I dont know where it is. Head Down plus Foot Up, and I heard the beep. Everything is working again. Thank you so much for posting!!
Thank you SO much. Spent hours yesterday trying to get it to work and all the information I found online was saying to hold the foot and head both UP, not one down and the other up. I was already resigned to purchasing a new control box, thinking mine was fried, but thankfully I couldn't actually find my model control box anywhere. Tried your tip and was delighted when I heard a resounding beep. Everything is working again.
Sir!!!! You have saved my back and I from a second night of painful sleep!! My remote stopped working yesterday and we have been tried everything that every video suggested. I even found the owners manual for my Craftmatic Legacy adjustable bed and follows its instructions….nothing. I called Craftmatic’s customer service several times…nothing. In a last ditch effort, I stumbled across your video. We followed your instructions and my bed quickly started to move!!!! Thank You so much for your help!!!
❤❤❤❤I thank you so much for this video❤❤❤our bed died in the up position. Unplugged then it went down and wouldn’t move. We have the analog system and it worked.
I had this same problem, I followed what you suggested, and it worked!!! Thank you very much!
Awesome dude you fixed my problem also I was doing both up on the remote and then you said 10 to 15 seconds I try that it didn’t work…. until you showed in writing the instructions it dawned on me …..thank you thank you thank you
Thank you so much! I called the 800 number and they never answer. You saved my life!
This video has been the only one that clearly explained the steps to take that successfully worked to re-pair my remote to my Nectar's adjustable frame. Worked like a charm! Thanks so much for making this video!
Your video is the only one that helped me…thank you.
I had the same issue. I couldn’t find the instructions and I couldn’t find anything on the internet. I happen to have the same remote and control box as yours. After watching your video it works again. Thank you!!!!! I thought my bed would never work again.
Thanks I just fixed mine by watching your video. I was crying because I couldn't fix it
Your video has saved me twice! Thank you so much!!!
Thank you! Our remote just quit working out of the blue and the instructions on the manufacturer website didn’t work. Saved our night’s sleep!
We bought this bed for our mom and it just stop working out of now where, we couldn't find any paperwork on it so we tried everything and nothing worked so after months of nothing we bought her a new one but I took her old frame because it was still like new. For some reason I started looking up information on the bed today and came across your video and IT WORKED! Thank you so so much.
we couldnt find the control box, but the up and down button press worked for us. Thank you for your help!
Thank you second time this happens to me and your video helped me remember, just a slight difference I don’t know why, on mine I have to press both up buttons and at the same time press and release the decoding reset button and we are good to go 😅 thank you
I was literally lying on the floor, half under the bed so I could reach the control box, at my wits end. I watch about 20 vids until I found yours. Syncing worked immediately! Thank you, thank you, thank you!!!
You have literally restored PEACE in our bedroom! Lol. THANK YOU!! My husband said I'm the woman for finding you with this video lol
Thank you sir. I am a carpenter that has swollen legs every night. My legs are happy again.
Thank you Ed. Out of the blue, my remote failed to flatten out my bed. I immediately went on to You Tube, and voila!! I found your video, followed your directions, and was back in business. Whew!!! Thanks again 😁
Omg can I just say thank you, thank you, thank you!!! I had tried everything. Haven’t had this thing working for months. Came across your video and bam, fixed within 30 seconds. You are a lifesaver! I also couldn’t find the directions that came with it, so was going by the ones linked to the product on Amazon where I bought it and nowhere in those directions does it say anything about syncing the remote this way. They really need to fix that! Anyway thanks again for sharing!
Thanks. This worked for resyncing the remote of the adjustable bed I purchased from Sams Club 4 years ago. First time I have had a problem with the bed, and of course I couldn't find the manual that came with it, lol. Thanks again!
Been looking for instructions for 2 days when I lucked up on your video.. Thank you so much!!!
FYI if trying to pair two twin xl (split king) mattresses reverse the settings for the second mattress. Hold the head down foot up simultaneously. All smiles over here!!
Thank you!!! Mine didn’t beat but the light flashes twice on my remote !!! Thanks again!!!
Thank you so much. Been searching for hours for this and finally found the one I have here. You're a Saint!!!
Thank you
Thanks for posting this video! We never would have figured it out on our own! I do want to add that pressing the remote buttons and the button on the box underneath the bed should be done simultaneously. 🙂
Yes, very important. So glad you said this, as mine would not work otherwise.
Play on Playa'! This worked perfectly for my Nectar adjustable bed. Thank you, kind sir, for your ingenuity & industriousness.
It worked!!!! I was about to give up as this is different instructions than the owners manual I have. Thank you kind sir
Thank You for your excellent video! We bought a "retuned" split-king from "Mattress Firm" with a dead remote. Your instructions were spot on to sync the free replacement remote.
Thank you so much for this video! We had the same problem and couldn't find anything online. Your video helped and now our remote is once again synced to our adjustable bed frame, working like a charm!
Excellent video. Only one I could find that helped. Key point not on the directions. You have to push the reset button while you’re holding down the head and foot buttons. Remote beeped and synced. Spoke to support and told them to add that little point to the directions.
Thank you! All of a sudden, my dad's remote for the bed stopped working. I have the same exact remote for it, and it worked! Grateful for your video.
Nice thanks! I tried several other suggestions and was about to give up. But they were all saying press up on the head and up on the foot. Never worked. Yours got me going!
You are a gem!! Thank you! I have been trying to figure it out for about a month. I was loosing my mind. THANK YOU!
Thank you!!! Your video as the only one that was correct. I watched 4 videos that said to hold both buttons up, did not work. You made my 87 year old mother very happy.
This video saved me three times now! Thank you once again! I'm hoping since I put new batteries in the remote this time that I won't have to re-pair it again for a year or two
Thank you so much I went crazy not know what to fix and I came across you videos and it worked!!!!!!!!! Yehaaa thank you so much
Thank you so much for sharing this. After numerous calls to the company I purchased from, and receiving no help, I watched your video. You solved my problem.
oh my gosh, thank you so much for your video. My remote just stopped working 3 months ago and I have been looking for help, but with no success until I came across your video.
Literally saved my issue, out of all the videos on CZcams. Thanks a lot my man!
I had mine for 5 years and I have lost the paperwork and was getting ready to buy a new motor thinking that was the problem. Thanks to your video I fixed it. Thank you so much!
Thank you for posting! Lost my instructions and couldn't find anything helpful until your video!
FANTASTIC!!!! Thanks for posting. We love our bed and had no response from the company.
Great job. I was lost. Had to go a whole night without it. Ready to get a new control box myself 🙏
I should have watched this video first!
I tried fixing it for hours. Finally, after watching this one, I got it. Thank you.
Thanks for posting this. I couldn’t figure out what to do. I thought I might have to buy a new remote. Your video was a great help. My remote works just fine now.
Thank you SO much for making this video! Whew! I would have never found the button under the bed. Now I can rest again. Thank you, thank you, thank you!
Wife's bed always goes wonky now I can reprogram all the time. Thanks for the video!
Thank you so much for making this video! Your instructions saved the day! Much appreciated.
What I did was I unplugged it from the wall for 10 seconds then plug it back in and I held the head up button in the foot up button for two seconds and then reconnected it works!
Thank you for posting this, I was in the same situation! Got it fixed!
Thank you so much for this information! My battery died last night and when I switched the batteries it would no longer work. I could not find anything on how to sync this and then luckily I tried youtube and voila! thank you for the information.
Worked when we held the remote's blue light up to the window next to the button on the control box and then followed procedure. Thank you.
Thanks a bunch this saved me so much time and money and I would have broken something in the process. 👍 good video.
Thank you so much!! Fixed mine tonight because of your help!!
Thanks for this, was trying for too long with the both up bottoms. They really need to fix their online instructions to say foot up and head down.
Thanks it worked great! Thanks for the tip
Thanks! this helped us today.
Thank you so very much, for thinking about us others. And for going the extra mile to make a simple(to the points) video 🎉😮!!!!
We have a split frame and need to sync both of the black boxes to the controller. Waving the camera over that paragraph is not enough. You could have minimized the "talking head" portion, and spent more time, zooming in on the page of the manual.
Thank you so much!!!!!!!❤️❤️❤️❤️❤️❤️❤️❤️❤️
Thanks a whole lot mines working again
Thank you so much. This instruction worked for my idealbed brand
Thanks this worked for me had to press the buttons on the remote and the button on the box at same time
Thank you so much!!!! We've been researching for days!!!!! You are a life saver!!!!!
Thank you ! I followed your instructions, it worked! Bless you man you are amazing !!!!🙏
Thank you so much! My mom’s bed is now fixed.
Thank you so so much for saving me money and time!! Only video I found that could help me!! You are a life savor!!!!
You truly saved the day sir!
Thank you, this was a life saver!
Thank you very much, Sir Hartrum!
Thank you. I lost my paperwork so this really helped.
Thanx....my remote works on massage modes but adjustable bed mode quit.
So, I decided not a battery problem.
😊 I share your memory problems...🤣😂
Omfg thank you, this instantly worked 10 stars good sir
Thank you for your video it was the help I needed. Also for anyone that is trying the instructions without any luck like I was the secret was taking a pencil /pen and pressing the button under the bed. I was doing it with my finger without any luck u til I took a pencil inserted after. Also if you are doing both beds sinc to one remote like I was once you have one side working you disconnect the one that works and do the same for the other bed once that one now works connect the other side and voila both sides are since to one remote. Hope it helps
Just did this on my Idealbed worked perfectly thank you for your help definitely a thumbs up for you
Love the video you have helped me at least 6 times lol 😆THANK YOU!
Thank you so much. You are a life saver!
Couldn't get mine to work,,,,,,then I put batteries in it.🤣😅
This was very helpful. Thanks for making my life easier.
You just saved my life!!!
Thank you for sharing. Saved our night.
Thank you so much!!!! It worked 😊
Great video, thanks for posting. Most informative one I found yet… it’s been hours and I have not been able to get mine to work. Really hope I’m just doing something wrong, the bed frame is not even two years old. Would appreciate any help.
Thanks
🎉🎉worked for me! Thank you!
Super helpful! Thanks! Just saved me.
You are very welcome 😊
Thank you very much it worked been going round and round with this thing it worked
Thanks so much you saved the day sir. 💪🏾💪🏾
Thank you! Exactly what I needed.
thx so much for the video was about ready to order a new module for base but not its working again amazing thx again
You video was awesome. You are the man!
Oh bless you, this saved us! Thank you
Thanks for posting. Where is the button on the control box I need to push?
Nice to know... The Head Down button has quit and it appears that these remotes are permanently sealed. Battery leaked years ago and one of the plated through holes in the PCB has finally corroded enough to open the circuit. Will have to cut the case open to gain access to the board. A quick look on-line shows the price for these remotes to be insanely high. :
Your video saved me again!
👍 great news 😊