Nissan Maxima And Infiniti PCV Valve Replacement with Basic Hand Tools HD
Vložit
- čas přidán 27. 08. 2024
- PCV Valve replacement performed on a 1997 Nissan Maxima. In this video you'll learn how to test and replace the valve. Don't forget to wear safety glasses.
► Subscribe: / carsntoys
►► Helpful Tools: www.amazon.com...
►►► Nissan Maxima Maintenance and Repair Playlist:
• Nissan Maxima Maintena...
►►► Our most helpful videos (One million + playlist):
• 1 Million Views Playlist
Note:
This video is being performed by an experienced tech. Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, use safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk. Carsntoys is a member of the Amazon Influencer Program.
Publication, reproduction or distribution of this film is strictly prohibited.
Carsntoys
/ carsntoys
Hi Omer. Personally, I would change the entire shock assembly as one piece. It's makes the job quicker and you don't have to worry about removing the coil spring. I have a video on how to replace front shocks/struts on a Maxima as a reference point. Regarding the lateral link, check for cracks, distortion and/or other damage. Replace if necessary. Cheers.
Great video, I was replacing the PCV on my 2001 maxima and while replacing it it broke off and fell inside. dohhh, now taking off the entire intake and and valve cover to get to it and replace the valve cover. its likely time to replace the gaskets always. got a great deal on a entire kit Intake kit $9 and valve cover gaskets kit. $13. just have to wait few days for it to be delivered. and I will replace the PCV and its tube along with it. since it turned to plastic and broke from age and heat
Got it done, new PCV
grommet/insulator
OEM #11812-41B00 from dealer and pcv valve. And hose from local auto parts store. The car seemed to run better and was more responsive afterwards . I have some oil leaks and high oil consumption so I thought to change PCV first since it was likely 20 years old.
Good Job! You made that look easy , thanks
Hi there, I enjoyed viewing your show. You explained very well and your video was great.
Just went thru this on a 2001 maxima.
It’s a little different but I defently needed to replace PVC. Car runs better , more responsive and I hope less oil consumption/leaking.
Rear main seal was leaking and I think. front crank seal.
I have used some at205 reseal oil additive which seemed to of helped make the leak manageable.
Okay sir
. Good job ..I have a cuestion when of pcv valve is.not good show any code. In the scanner.??
Great videos !!!
My 97 nissan maxima gle takes long cranks before it starts what could be the possible problem kindly let me know by the way I put new battery and new starter
Under the hood of my 99 Maxima 3.0 I don't have that black valve
that evac purge valve?
Thanks alot bro!
Hi, thanks for your great videos, i have a Honda and also subaru impreza 2012. how frequently you think its necessary to change de PCV Valve?
I tend to check every three years. They often last quite a bit longer but it's cheap insurance.
Again, you have helped me immensely! Thank you for your awesome videos!!! You are the best!
+gojiragirl69 Glad to help
Hi.. Really enjoyed your video and clear HD image, showing clearly every detail. I have a 1992 Nissan Maxima SE 5 sp. all original. I have owned this car for 23 yrs (march 5th was its birthday) I store it in the winter time and need to have the VTC replaced. The loud clackitty sound has become unbearable. Nissan Canada cannot supply the parts but the US parts are still available. Do you have a video explaining how this is done? Have you had this issue too? it was common on1992-1994 Nissan Maxima's. Thanks... Fred
Derf A. Hi Fred. Unfortunately I don't have a vid showing this repair.
for a 2000 Nissan maxima, 5 speed, 3.0 liter
good vids, thoughts on oil catch can?
Hi man your maxima tutorials have helped me a lot I havebeen your subscriber for a while now wait impatiently for your maxima tutorials need to ask your professional advice my maxima has 148000 miles and the ride quality has gone quite bad thinking of changing the rear shocks do u suggest to get the whole assembly or just the shocks one more thing the lateral link on the rear should it be changed or left unbothered in advance thanks alot for your videos
Hey man. . Do you have anything on the swirl control valve?
I have a 1998 Infinity I30 160 kms. Recently I've noticed it's hard starting in the morning.It turns over and fires but it dies much like out of gas when it is even full tank. I have been trying to press the gas and it runs no problem and starts every time in the day. I need to know from you guys if you have any idea what the causes of the problem. Thanks.
It could be a number of things. Any trouble codes?
yeah,it's PO440,I thought it could be just the gas cap,I've replace it with aftermarket cancelled it but came back on.
jericjem22 its an evap system leak
Yeah, so you probably fixed it already, but likely cause is the butterfly valve in throttle body is gummed up and / or MAF sensor dirty. Clean up the throttle body with carb or throttle body cleaner and spray the MAF sensor as well. First time starting after will be hard as the engine burns off the cleaner, but then it'll start just fine after that.
What size hose does it use?
It seems to be 3/8" inside diameter and 1/2" outside diameter which I can't find anywhere. Napa only has 5/8" outside diameter which means none of the original hose clamps can be reused.
where to find it on a 2007 Maxima?
Hilda Milan I think in the back next to the intake manifold
Yup under the manifold I had to replace the gasket covers.
I want to ask, what are the signs of a bad PCV valve?
Tyler Plane Hesitation and lack of power are most common.
@CarsNToys Alright, thanks! I kind of figure that there was an issue with my Impala with these issues but I had to confirm symptoms.
Damn..I'm trippin.. I sent you the same message a day ago!! Lol!!
Do you know anything about a swirl control valve?
Yes, it's essentially a valve that improves fuel consumption. What are you looking for specifically?
My car makes a whistling noise like escaping air. It has no power. Showing a p1130 code- Swirl control valve. It also wont get over 2500-3000 rpm in any gear(standard trans.) or 60mph. Does that sound like symptoms of the swirl control valve?
I recently changed the coil packs, spark plugs and air intake boot.
You really want to test the swirl control solenoid valve. To do this, you'll need a multi-meter. I can upload schematics describing how to pinpoint the problem. Unfortunately my Maxima is pre-swirl valve so I can't upload a video. But if you want to give it a shot let me know and I'll upload schematics to my pinterest page.
CarsNToys can you do a video please because im having the same
problem
We're the hoses 3/8ths?
Branndon n I believe so. It was some time ago when I shot this but 3/8 sounds right.
wheres it on sentra 2002 1.8l? thanks
Send us a message via Facebook. We may have schematics on file. Cheers.
Merci
Please HELP!! I have a 1995 Maxima SE automatic with 332k miles on it. I've owned this vehicle for 20 years. I have an intermittent misfire when idling at a red light or with the car in drive. If I put in neutral the misfire pretty much stops. It's not giving off any codes and check engine light has not come on. I've changed plugs (NGK), after market ignition coils and air filter (only because it was time). I still have original injectors, fuel pump, changed mass air flow approx 10 years ago and PCV valve. What is the best way to diagnose this misfire without the computer giving any codes? I've been told it could be the computer, injectors, valve in my engine, EGR, could be the aftermarket ignition coils. Any help will be greatly appreciated. Thanks
kfjones58 Unfortunately, there's quite a list to check. I'd try to stick with OEM rather than after market. Misfire can be generated by the fuel pump circuit, fuel pressure system, injector, pcv, ignition time is off, egr, or a bad cat. (Other systems usually drip the check engine light; such as mass air flow, o2 sensor, etc.) You'll have to go through each system and check the condition. I don't have any vids for fuel but I do have vids for the injector, pcv and egr. Just search my page or carsntoys.net. Good luck
Thank you for your prompt response. You have definitely given me hope. I think I will take it to Nissan and have the injectors and fuel pump checked. After all, they do have >332k miles on them. It's going to cost me, but my baby is worth it. Thanks Again
No problem man. good luck
Egr pipe its small and gets clogged its forsure forsure
I had a intermittent misfire on my 99 i30 and I changed all those things too and realized it was only 2 of my fuel injectors causing the problem
Pinches locos con el control remoto