EASY Hybrid Battery Charge 2009 Ford Escape - No need to remove battery!

Recharge dead hybrid battery!
1-2 hour job to charge a depleted 2009 FEH Hybrid battery WITHOUT removing the battery from the car. Also installing the charger into the battery unit so you can easily charge up a depleted hybrid battery in the future using just an extension cord into your wall outlet.
Stuff you’ll need:
Mean Well HLG-120H-C350A 430V 350mA 150.5W Single Output Switching LED Power Supply with PFC
www.amazon.com...
·T30 Torx bit with center hole (for removing the T30 battery cover bolts that have center pins)
www.amazon.com...
·T30 Torx bit (for removing the two short side bolts of the battery cover near the wheel wells)
· 1/4” box wrench or needle nose vise grip pliers or-? (to hold the bit for removing the short side bolts
, alternatively, you can use a L-shaped hex/allen wrench that fits in a T30 and cut the short end of the L
since the space is tight)
This low profile ratchet would work well:
www.amazon.com...
·10mm socket or box wrench for removing the two battery cover bolts that face the rear seat
·Wire cutters, strippers
·Soldering iron w/solder and heatshrink tubing and heat gun (or other method of connecting wires)
·3-prong male plug end for a standard household outlet and screwdrivers to install
www.amazon.com...
·Extension cord
·3/4” clamp-on non-metallic service connector
www.amazon.com...
·Electrical voltmeter/tester
·Some short screws and a drill/driver