NIU KQi3 Pro eScooter - Hidden Feature: CRUISE CONTROL Demo @ Different Speeds 23, 18 & 28 km/h!
Vložit
- čas přidán 5. 12. 2021
- Cruise control can be activated on the NIU KQi3 Pro eScooter (North America version) by holding/maintaining the same speed for approximately 5+ seconds. An audible beep will sound and you can release the throttle and cruise without any input. To deactivate, hit the brakes or throttle again.
Tested multiple times at different speeds and confirmed it works, even in e-save, sport and custom modes. Scooter was not connected to app.
Firmware: K3C01V19
NIU app V4.7.0 - Auta a dopravní prostředky
Hello, I have a standard NIU KQi3, it has a maximum of 21 km, how can I increase the speed to 30?
the app
@ghostdemi7484 what about the app?
Have to change it on the app
Podes enviar a aplicação?
Each region is restricted to different max speeds and features depending on local laws. This is the American version.
Do u know how to get it up to the max speed normally? My scooter used to do 25/28 but now it only does 17. It’s not on eco. When it’s on eco it’s 9
Make sure the batter is fully charged. Top speed will go down when the battery is used.
Same problem here did you find any solutions ??
Might be region lock in your country to a limited lower speed unfortunately
Hey my scooter is the same as urs and I’m having trouble turning it on like it won’t do anything I just got so I know nothing about can you help??
Did you plug in the cable inside the handlebar stem? Or try to unplug it and replug it back in.
Have you tried uphill ride with this scooter?
Yes, it climbs uphill just fine, but it will slow down a bit naturally. Cruise control will still work uphill but decrease in speed .
Does the cruise control work at 32 kmh?
Yes! It works at 32 kmh max speed. I tested it at home and on the road. See my other video: czcams.com/video/2IOloa24E8M/video.html
I do it on but it is not going
Olá boa noite, preciso de ajuda para desbloquear a minha Trotinete KQi3, apartei sem querer no botão de desligar e as rodas ficaram bloqueadas e quando tenho ligar ela dá um bip e não arranca!
You need to unlock in the app
@@ww3k pelo aplicativonãoconsigo desbloquear, não existe outra maneira?
@@heliopula Try to unplug the cable in the stem, then replug it.
I have kq12 pro scooter how can do it ,after do anything,it can effect on warranty
Depending on where the scooter is sold, it is region restricted to different features depending on local laws. This is the American version.
@@ww3k I brought in Portugal, have any options to increase speed
where did you buy that skate? or on what page because I bought one on Amazon and it does not come with the functions that you are showing I saw all your videos
by the app some times tou have to upgradde the firmware, and you'll have all functions... for speed it's a problem... in italy 25 km/h it's max speed :(
Sucks that it's speed limited in some regions! Scooter has more potential!
The EU version with 21 km/h max speed do have alot of diffrence.. No Halo light, no speed over 21 km/h and the cruise control cannot be used.
Fixed use modded app with all features but the speed has to altered through the fjrmware
That's really unfortunate the EU version is so handicapped!
Good video! Do u know how to unlock the speed limiter?
It is locked by region by the manufacturer, based on local laws.
@@ww3k so basically u gotta hack the app to unlock at least the 32 kms/h.. Do u know if it's possible?????
Yep its locked based on models I feel the higher versions have the same motor with higher speed unlocked, because i got mine repaired and I guess they put it on some repair mode and forgot to change it and my new max is 32kph before it was 28kph
Each region is restricted to different max speeds and features depending on local laws. This is the American version.
@@ww3k maybe yes but mine, is the basic version i2 pro, i3 pro goes to 30mph and i3 max goes up to 40mph as far as i remember so mine is definitely unlocked rn
is this possible on a KQI2 pro?
Yep, on the app
Each region is restricted to different max speeds and features depending on local laws. This is the American version.
Guten Tag wie kann man den Tempomat aktivieren?
It came shipped activated for me. It may be region specific and software limited. I put instructions in the comments: Cruise control can be activated on the NIU KQi3 Pro eScooter (North America version) by holding/maintaining the same speed for approximately 5+ seconds. An audible beep will sound and you can release the throttle and cruise without any input. To deactivate, hit the brakes or throttle again.
Thats a selling point.... Not a hidden thing 🙄 brah
Brah, cruise control was not a feature in the app when it first launched. It was hidden when the video was posted on 2021 Dec 6.
How does this work?
I put instructions in the comments: Cruise control can be activated on the NIU KQi3 Pro eScooter (North America version) by holding/maintaining the same speed for approximately 5+ seconds. An audible beep will sound and you can release the throttle and cruise without any input. To deactivate, hit the brakes or throttle again.
It may be region specific and software limited. Mine came shipped activated already.
Easy to do with the app..
I'm glad they updated the app now to unlock cruise control!
It doesnt work.
Each region is restricted to different max speeds and features depending on local laws. This is the American version.