Definitely attracted to the simple design look. I would like to see the extra seats folding against the wall instead of removable since those seats are heavy and a nuisance when a person have to be removed.
In my opinion Better design for this application would be to keep the floor open and just have bunk beds on the wall that fold down and up… also a bench seat that easily folds up out of the way (without having to be totally removed from the van) would be superior too… the stuff obstructing the wall and floor really isn’t needed for a minimalist build. All the power and water isn’t needed usually for these minimalist sports enthusiasts builds. They usually just toss in a yeti cooler
This was a custom build and each item, including layout, water, power, etc. were requested by the client. We could certainly do an even more minimalist build, we like the bunk bed idea.
I like the simplicity for sure, builds can escalate cost very fast. It would be nice to see a permanent two person bed looks like with extra storage underneath? What is the railing at the ceiling for?
Could this be done with a crew van? I'm getting ready to order a van from Mercedes are their factory options I would need for a conversion similar to this. I like what you guys are doing!!
@@FEARNoMore We are only accepting new builds on Sprinter chassis. We had several clients who were already on the books with a Transit that we will be finishing out.
Can you tell us what wheels you used on this build, the width and offset etc. Also, did you have to do anything to the van like spacers or trimming to get those wheels and tires to work? Thanks so much and you guys do great work!
@@TitanVans No, not on an existing RV. I mean can you build a bed like the one on the Solis, but build it in a van? Copy the Solis bed onto a van build...with aluminum?
@@FEARNoMore Gotcha! We certainly could. The only downside to doing a large single sided murphy is the under bed clearance height. To have enough room to flip up the bed you need to lower the bed. That means less storage and no bikes under with the bed down.
I like the simplicity. Great build.
EXCELLENT BUILD, FIT AND FINISH LOOK SPOT ON! 👏👏👏👏
THE LOW ROOF VANS ROCK!
💪😎🇺🇲
Definitely attracted to the simple design look. I would like to see the extra seats folding against the wall instead of removable since those seats are heavy and a nuisance when a person have to be removed.
The both have there pros and cons. Check out some of our other builds, we do use the fold away seats too.
In my opinion Better design for this application would be to keep the floor open and just have bunk beds on the wall that fold down and up… also a bench seat that easily folds up out of the way (without having to be totally removed from the van) would be superior too… the stuff obstructing the wall and floor really isn’t needed for a minimalist build. All the power and water isn’t needed usually for these minimalist sports enthusiasts builds. They usually just toss in a yeti cooler
This was a custom build and each item, including layout, water, power, etc. were requested by the client. We could certainly do an even more minimalist build, we like the bunk bed idea.
wow
I like the simplicity for sure, builds can escalate cost very fast.
It would be nice to see a permanent two person bed looks like with extra storage underneath?
What is the railing at the ceiling for?
For the curtain to add privacy and warmth.
Could this be done with a crew van? I'm getting ready to order a van from Mercedes are their factory options I would need for a conversion similar to this. I like what you guys are doing!!
Send us an email at sales@titanvans.com and we can give you our Mercedes Sprinter buyers guide!
Hopefully you guys will start doing Ford transit builds again 😬
We have certainly talked about it, probably in the future. We do have a few more Transit builds in queue.
@@TitanVans Oh, so you haven't discontinued doing Transit builds, you just have more Sprinter builds ahead in line?
@@FEARNoMore We are only accepting new builds on Sprinter chassis. We had several clients who were already on the books with a Transit that we will be finishing out.
@@TitanVans Gotcha! That’s too bad for us Transit heads😏but I get it. Awesome builds regardless. Thanks for responding.👊😉
love the simplicity of the build. how tall are you for comparison?
6'3"
Can you tell us what wheels you used on this build, the width and offset etc. Also, did you have to do anything to the van like spacers or trimming to get those wheels and tires to work? Thanks so much and you guys do great work!
These are the Method Race 301 wheels, 16" with 50mm offset. Tires are BFG TKO 2 size 265/75R16
What material is that on the floor, sides, and cabinet in the back?
Its called Loncoin
@@TitanVans thank you fellas!!! Freaking looks awesome.
Can you do Murphy bed like the one on the 2021 Winnebago Solis 59PX, but using an aluminum frame? Without legs? Thanks
No, we don't do custom modifications to RV's.
@@TitanVans No, not on an existing RV. I mean can you build a bed like the one on the Solis, but build it in a van? Copy the Solis bed onto a van build...with aluminum?
@@FEARNoMore Gotcha! We certainly could. The only downside to doing a large single sided murphy is the under bed clearance height. To have enough room to flip up the bed you need to lower the bed. That means less storage and no bikes under with the bed down.
@@TitanVans Got it thank you.
How much did this custom build cost?
What’s the cost ?
The ol' 'hot' water heater.
🙄
Is this a 2WD or the 4WD?
This one is 2wd, they do come in 4x4 as well.
What's the color on this bad boy?!
Selenite grey
What are the largest tires can you put on these vans ?
Depends if it is a 2wd or 4x4. For 2wd, 265/75R16. For 4x4, 285/70R16
Can’t see 1/2 the interior.
Gotta watch 2/2 of the video.
U must be ft4.8
Why?
👏🏻👏🏻👏🏻👏🏻👏🏻😎👍🇦🇩