レジンのタピオカドリンクチャーム

Sdílet
Vložit
  • čas přidán 28. 08. 2024
  • 思わず飲みたくなってしまう💓話題のタピオカドリンク!モチーフアクセサリーを作りましょう♪
    レジンのタピオカドリンクチャーム🥤
    Let's make boba tea charm✨
    【Materials】
    ・Drop resin mold[OL-00806]
    ・Natural stone/No hole/Crystal[ST-02686-05]
    ・Czech beads4㎜[FE-0004040]×15
    ・Heaton[PC-301160-G5]×1
    ・lobster clasp[PC-300104-G5]×1
    ・Round Jumprings0.7×4㎜[PC-300070-G5]×1
    ・Jewel's drop
    a/white [NO-00920-9]
    b/yellow[NO-00920-3]
    c/Brown[NO-00920-7]
    ・UV-LED resin star drop / hard[NO-00923]
    ・UV & LED light 6W [NO-00927]
    ・Toning stick [JP-00162]
    ・Toning palette[JP-00161]
    ・Flat Nose Pliers[NO-00723]
    ・adhesive[NO-00267]
    ・Tweezers[NO-00223]
    【How to make】
    [1]Put a small amount of natural stone in the largest resin mold.
    [2]Resin solution is hardened until natural stone is not buried in the solution.
    [3]Put the resin solution about 1/3 of the pallet, add 4 drops of a, and adjust bc on the stick in small increments to make your favorite color.
    [4]Put [3] in a small amount and cure.
    [5]Add [3] in a small amount so that the liquid does not overflow, and add 15 beads.
    ※Adjust with a stick so that the holes in the beads do not face as far as possible.
    [6]Put [3] until the mold is full and cure.
    [7]Remove from mold and glue heaton. Attach the lobster clasp with a round jump ring and it's completed.
    Let's try it✨
    【用意するもの】
    ・シリコンレジン型/しずく[OL-00806]
    ・天然石/サザレ無穴/水晶[ST-02686-05]適量
    ・チェコラウンド4㎜[FE-0004040]×15コ
    ・ヒートン[PC-301160-G5]×1
    ・カニカン[PC-300104-G5]×1
    ・丸カン0.7×4㎜[PC-300070-G5]×1
    ・宝石の雫
    aホワイト [NO-00920-9]
    bイエロー[NO-00920-3]
    cブラウン[NO-00920-7]
    ・UV-LEDレジン星の雫/ハード[NO-00923]
    ・UV&LEDライト6W[NO-00927]
    ・調色スティック[JP-00162]
    ・調色パレット[JP-00161]
    ・平ヤットコ[NO-00723]
    ・セメダイン ハイスーパー5[NO-00267]
    ・ピンセット[NO-00223]
    【作り方】
    [1]型に天然石を少量入れます。(10~20粒程度)
    [2]天然石が液に埋まらないくらいまでレジン液を入れ硬化します。
    [3]レジン液をパレットの1/3程入れ,aを4滴,bcをスティックに少量ずつ調節しながら入れ,お好みの色を作ります。
    [4][3]を少量型に入れ硬化します。
    [5]液が溢れないように少なめに[3]を入れ,チェコラウンドを15コ入れます。
    ※チェコラウンドの穴ができるだけ外を向かないようスティックで調整してください。
    [6][3]を型のいっぱいまで入れて硬化します。
    [7]型から取り出しヒートンを接着します。丸カンでカニカンを取り付けて完成です♪
    ぜひ作ってみてくださいね💓

Komentáře •