Radius cutter (Ball Cutter) for the lathe
Vložit
- čas přidán 10. 09. 2024
- Making the radius cutter parts and assembly.
First test cutting a pair of steel spherical washers.
Plus some more top tips. You may also like to see Changes to ball cutter • Changes to the radius ... and Off set insert holder for ball cutter • Offset tool tip holder...
Very inspirational. Thank you for showing what can be done, including some nice milling on the Lathe.
I love it! Very simple design, easily made components. Thanks so much!
Alan, thanks for these useful tips. Always refreshing and with attention to detail.
Thanks For your comment Pete
Hi Alan. I’ve watched a few of your videos & I find you inspire me to make things in my new workshop that I would have attempted. I also thought the tip for milling in a bench drill really clever indeed. I really hope you keep on making them. Thanks
Sorry I meant it to say (wouldn’t have attempted)
Just enjoyable to watch a true master . Gracias for sharing your video
Can’t wait to make this
who needs a cnc when you have the skill to make the tools you need
great job and great video
Thanks
Thank you sir for the informative video ❤
First time on your channel. 'll be back.
Thaks about your information father...❤🇮🇩🤝
Alan, thanks for sharing this video! I always learn something new from your videos, because your solutions are both innovative and elegant. Keep up the good work!
Thanks John
Alan loved the step bystep way you went about this it shows what can be achived without a huge great milling machine of expensove castings i plan on making a smaller version at some point for my simat Nigel
Thanks Nigel
I have a 4 jaw chuck to repair then I will be working on a few mods for the radius cutter.
i will be waiting to see what the mods are
Nigel
Very nice tool, First time I’ve it used for concave cutting. Cheers Peter
brilliant very well made shows what can be done on the lathe
Thanks David
Piece of art, masterwork.
Thanks Alan
Very impressed with your work holding on the lathe. I have made a similar one, except I have a mill so I did not need to hold work like you did. But I learn and now have a few extra tricks for my lathe as well. Wanted to point out two things; first, mine like yours requires the turning to be far enough away from the chuck to insure no chuck interference (this has caused me to sometimes secure the work rather poorly), second, my lathe chuck is mounted by screw threads, so running in reverse is extremely dangerous.
Overall very good job!!
Thanks Tom
Love making what you need instead of just buying it
Impressive project. Thanks fromm Angola, NY
well done thanks for sharing all the best from John in Texas
Thanks John
Great commercial and show!
Excellent video, for once someone that actually speaks , well done form New Zealand
Muito interessante seu projeto, vou fazer um para facilitar meu trabalho. Obrigado por compartilhar.
Obrigado por assistir
bunu herkes yapıyor kafamda iki fonksiyonu birden yapacak bir topuz aparatı var ama yapması sıkıntılı bana yardım edecek birileri ve sponsor lazım
Very good
Great jod sir
Get a collect holder for the mill tools, your methods are very dangerous and dimensions / finish must be poor due to the chatter and play. However well done I like it
Good made
👍👍👍
Very nice designe... :D
Thanks
Good
Why not just put a cut mark on the side, and a 0 mark on the sliding piece. Then all you need do, is mark on the center for each inch of ball size, from the zero mark?
Hi Ronald
I could do that if I used the same tool tip and tool holder. As I have different tool holders the tool position changes, so the marks would be wrong.
Cool !!! can be this used to make WHEELS ??? thanks
Hi it can put a radius on the outside of a wheel watch next weeks video
Alan
Окей👍
Not right, if it falls out you have tampered with it
aku menyukai video yoube.
sangat suka sekali
menyukai. Enak tenang nuntunya...oki...
Terima kasih
You are garet
روعه جيد جدا
EEEK! Never, ever, use a drill chuck with a milling cutter. Drills push back into the chuck as they cut, end mills pull out. Nothing to do with the chuck holding taper. It's potentially dangerous, damaged work, damaged operator if cutter escapes. BobUK.
noce
Very confusing.. all over the place
Go to the channel ( this old Tony ) much better way to maker one. And a better one at that
Mice