Video není dostupné.
Omlouváme se.

Adding USB001 virtual printer port when manually installing printer drivers

Sdílet
Vložit
  • čas přidán 17. 08. 2024
  • If you are manually installing your printer drivers on Windows and cannot find the USB001 (Virtual printer port for USB), then consider using this work around to manually specify the port through which your printer is connected to your computer.

Komentáře • 33

  • @andrealattanzi2915
    @andrealattanzi2915 Před 3 lety +30

    useless. if you have already the printer installed, you don't need to do this. Basically, you are creating a local port by connecting by the network to the existing one. If your system is not recognizing the printer, this trick will never work.

    • @Jagraj2789
      @Jagraj2789 Před 2 lety +3

      Same here. Not working

    • @first8208
      @first8208 Před 2 lety +1

      exactly

    • @MrGoMario
      @MrGoMario Před rokem +2

      NO !!! It is not useless!!! Do exactly what he is saying and you'll end-up with a USB001 (Virtual Printer port for USB) :)
      Consider the following (very specific) case which can be solved ONLY by following the steps in the video. NOTHING ELSE WILL WORK!
      You have a LAN, partly wired and partly wireless. The printer is USB connected to the wired part of the network (directly on the main Router). Now ask Windows to correctly identify (and install) the printer driver, from any of the wireless connected PCs :) It will never work, unless you first CREATE the virtual USB Port on the PC where you want to install the remote priter.
      Another way of creating the Virtual USB001 Port (which you will use to connect the printer) is by MANUALY connecting the printer to the PC using an USB Cable. Run thru the entire installation process. Then, WITHOUT switching off the PC, remove the printer and reconnect it to the LAN Router (using the USB port on the router). Go back to your PC and do a network scan for printers. If you are lucky it will find the printer. If not just asign the previveously created "USB001 Virtual Printer Port" to the Printer driver on you PC :)

    • @dejanrados985
      @dejanrados985 Před rokem +2

      It says for me The network name cannot be found after entering pc and printer name.

    • @vitalka_bit2d
      @vitalka_bit2d Před 3 měsíci

      Useless couse when you don't have the USB001 in the list u can't to do anything

  • @Alexi-pj4yb
    @Alexi-pj4yb Před 2 lety +1

    Your video helped me a lot, I was looking for the port that I needed to configure the local printer to. I used the port USB001 virtual printer port as you explained in the video, it works 😊 you !!

  • @CryptoCombatt
    @CryptoCombatt Před rokem

    god bless u man finally i been doing research for 2 hours finally fixed it

  • @HR-wd6cw
    @HR-wd6cw Před 2 lety +5

    The biggest issue people will have is that the USB001 port won't exist, and they'll have to create and configure this. Otherwise, what you are showing is basically how to connect a printer to an existing printer port, which is of little help. In your case, the USB001 port already existed so you're not really "adding" it.

  • @luiso7930
    @luiso7930 Před 10 měsíci

    It worked wonders! You're the man!

  • @dadtechmech
    @dadtechmech Před 2 lety

    i love this tutorial great exactly my problem in my printer is USB001 NOT IN THE LIST. i just followed your instruction .......BINGO got it.

    • @vitalka_bit2d
      @vitalka_bit2d Před 3 měsíci

      So, did u print anything after that on ur printer?

  • @lay6745
    @lay6745 Před rokem

    Thank you so much. Saved my day.

  • @charlesnelson3512
    @charlesnelson3512 Před rokem

    Plain and simple it doesn't work this way for a new printer. It only appeared to work and the printer name was available only because the printer in question is already installed. Also, LPT1: is a very old style parallel port for legacy equipment which only works in rare situations. I appreciate your manner of presentation.

  • @esakm
    @esakm Před 2 lety +1

    hp rbx-load problem or error when trying to install or driver the HP LASERJET PRO MFP M28A printer on the computer Windows 11 64-bit operating system and x64-based processor

  • @bobmartin9742
    @bobmartin9742 Před 2 lety

    I have the same printer hp laserjet 1018 and I had similar problems, because Windows10 doesn't recognize as printer, but as other device. It seems that the port USB001 only shows up if the printer is already plugged and connected. Make sure there isn't a problem with the usb cable.

  • @vitalka_bit2d
    @vitalka_bit2d Před 3 měsíci

    Useless couse when you don't have the USB001 in the list u can't to do anything. And im intresting - do u can print anything after that at all on your printer?

  • @samarinvladlena6026
    @samarinvladlena6026 Před 3 lety +3

    It says this network can not be found, help

  • @parthiatp3
    @parthiatp3 Před 2 lety +1

    I got a error network name cannot be found.

    • @MasterSiri
      @MasterSiri Před 9 měsíci

      Same shows to me ..what you did plz help

  • @chilipez2934
    @chilipez2934 Před rokem

    An improvement to this video would be to have your pc reflect the state of the viewer's pc, so that it is possible to properly follow along with each step, instead of you having to explain that your pc already has been update (to ignore that fact). Confusing.

  • @microsoftsarker
    @microsoftsarker Před 2 lety

    Thank you soooo much

  • @sigmiami
    @sigmiami Před 3 lety

    I need to add a universal virtual printer driver to a windows 10 machine that has a hp p235 on the connects via rdp to an old server 2000 to do printer redirect... the server has a the xp and 2000 drivers on it.

  • @kaneenecollins5004
    @kaneenecollins5004 Před rokem

    The network name cannot be found

  • @abhijithc8366
    @abhijithc8366 Před rokem

    It's showing Specified path is invalid

  • @lazymoriisie
    @lazymoriisie Před 2 lety

    i couldnt see my standard port :c

  • @merel3248
    @merel3248 Před 2 lety

    Thank youuu!!!

  • @Karl0922
    @Karl0922 Před 2 lety

    ty dude

  • @rahulsain3773
    @rahulsain3773 Před 2 lety

    Bhai Esme model nhi aa rha hmare to

  • @82spiders
    @82spiders Před rokem +1

    I'll send you a bill for wasting my time. You have a lawyer?

  • @geokerspey7559
    @geokerspey7559 Před 2 lety +2

    Does not work! Not even close! This is fake.

  • @esakm
    @esakm Před 2 lety

    hp rbx-load problem or error when trying to install or driver the HP LASERJET PRO MFP M28A printer on the computer Windows 11 64-bit operating system and x64-based processor