Please make an intergrated tail light. Having the turn signals in the tail light would be more streamline in the back end. You guys would also be the first in the market if you make it and I’m sure sales will be incredible. I want one, but no one has made one yet.
TST Thanks for making these! I found them helpful. Just some advice to viewers. Unless you only bought a tidy and no lighting kits DO NOT WATCH this FIRST! You should watch the lighting video first so you can see that the plate is really the last part of job. So as to keep yourself from being covered in loctite.. Watch the lighting video then watch this video.. then do the job. Also, pro tip when routing the wires through plate use a bit of gorilla tape to hold them in place. Also mind that the cables follow the outside of the bend or you will obscure the latch. Everything in the kit is well thought out and high quality as you should expect from TST. The final result is excellent!
Hi, just a quick question, what is the angle of degree the license Plate is in, in the low mount position? In germany we are only allowed with a 30 degree angle of the license Plate. Im sorry for my bad englisch - thank you!❤ Realy a Great construction
@@TSTindustries I hope that happens. I've been shopping for a new "everything" bike for a bit, and I believe this new XSR might be the one. I think it's got great potential.
@@Antonio_zx6r the plate angle is adjustable to the position you want it to stay at. It is not a setup you move back and forth during use. So wherever you set the plate you adjust the lamps to fire parallel with the ground and tighten everything down. -BR -BR
I have the new XSR and would really like to mount the plate in the low mount location but I would like to use some smaller blinkers next to the tail light. Is there an option for that?
@@mezzthomas I wouldn't have a way to show you here because the comments do not allow photos. If you reach out through our customer service portal and tell our cs guys about this conversation, they will get your email to me. I can then reply with a photo. I don't have the bike at the moment so I can only show the parts but not installed
Please make an intergrated tail light. Having the turn signals in the tail light would be more streamline in the back end. You guys would also be the first in the market if you make it and I’m sure sales will be incredible. I want one, but no one has made one yet.
A 100% This is definitely a must. I had one for the FZ07 and it’s a must for my new XSR900 🤙
TST Thanks for making these! I found them helpful. Just some advice to viewers. Unless you only bought a tidy and no lighting kits DO NOT WATCH this FIRST! You should watch the lighting video first so you can see that the plate is really the last part of job. So as to keep yourself from being covered in loctite.. Watch the lighting video then watch this video.. then do the job. Also, pro tip when routing the wires through plate use a bit of gorilla tape to hold them in place. Also mind that the cables follow the outside of the bend or you will obscure the latch. Everything in the kit is well thought out and high quality as you should expect from TST. The final result is excellent!
Hi, just a quick question, what is the angle of degree the license Plate is in, in the low mount position? In germany we are only allowed with a 30 degree angle of the license Plate.
Im sorry for my bad englisch - thank you!❤
Realy a Great construction
It's hard for me to comprehend how much better that looks than the ridiculous factory fender abomination.
If we see our market reach within this model go in the right direction we will develop something really special for the rear lighting on this bike.
@@TSTindustries I hope that happens. I've been shopping for a new "everything" bike for a bit, and I believe this new XSR might be the one. I think it's got great potential.
Will this work with aftermarket seats also?
are you able to use the license plate light with the low mounted version? Thanks
Absolutely!
31:43 and 31:44 are from same location?
BTW, is it the same bracket to be used in both places?
Those are two view angles of the same parts in the same configuration
-BR
What turn signals can I use with the high mount adjustable bracket?
Quadrix-D, Quadrix, Echo, BL6 pr BL6S, Mech-EVO
@@TSTindustries and I can tuck the plate without the turn signals moving?
@@Antonio_zx6r the plate angle is adjustable to the position you want it to stay at. It is not a setup you move back and forth during use. So wherever you set the plate you adjust the lamps to fire parallel with the ground and tighten everything down.
-BR
-BR
I have the new XSR and would really like to mount the plate in the low mount location but I would like to use some smaller blinkers next to the tail light. Is there an option for that?
We do not have one ready just yet but we do have a concept that we will likely be making for that purpose
I am making prototype of a concept I came up with today after reading your message. Check in next week and I can give you an update.
Can’t wait to see what this would look like!!
@@mezzthomas I wouldn't have a way to show you here because the comments do not allow photos. If you reach out through our customer service portal and tell our cs guys about this conversation, they will get your email to me. I can then reply with a photo. I don't have the bike at the moment so I can only show the parts but not installed
Same wish to run a low mount and tag light, but I would like to use the factory signals and eventually get luggage brackets