Shocking Truth about Vevor Ultrasonic Cleaner vs SpinClean
Vložit
- čas přidán 4. 02. 2023
- Comparison of the Vevor Ultrasonic Vinyl Cleaner compared to the SpinClean. The comparison I hoped to do of these two has been put on hold while we sort out the recent safety issues regarding the Vevor ultrasonic cleaner
#ultrasonic #safety #vinyl
This product has been deemed unsafe due to risk of electrical shock hazard, according to UK officials. Dec 2022
Official Product safety notices:
www.gov.uk/product-safety-ale...
www.gov.uk/product-safety-ale...
Are you considering whether or not to invest in an ultrasonic cleaner? If so, you might be surprised to learn the shocking truth about vevor ultrasonic cleaners vs spinclean. In this video, we'll compare the two machines and uncover all the facts you need to make an informed decision. - Hudba
Hi. I purchased my Vevor ultrasonic cleaner in the summer of 2022 and just found out about the recall about 3 months ago. I live in the US and bought it through Amazon. I was surprised I hadn't heard of the recall, and that Amazon had not notified its buyers of this. I'm very mechanically inclined and I took mine apart to check it, as soon as I heard of this. I've probably used it over 1000 hours with no issues. After inspection and testing I found all the solder joints properly, even beautifully done. All the wiring was neatly secured and insulated. No signs of over heating or char. I do run mine through a surge protector and turned off when not in use. I will continue to use mine as it puts my spin clean to shame. The USA industry (especially the car companies) are notorious for recalls so I don't think it's much to worry about as recalls happen.
Glad yours is working nicely - this company has something like 30 product recalls in UK - not sure about US status. Thanks for watching!
I second this. Also have the Vevor and no problems so far. I have the one with the digital read out and sealed buttons. I studied electronics in my younger years and still tinker quite a bit so Ill take it apart and check it out but I don’t know expect any surprises. As for quality, I was very nervous when buying it originally but I’ll definitely buy from them again.
Just remember that Tesla’s also just had a recall, so did VW, Toyota and countless other companies. It’s hardly a metric on deciding if something has been made poorly.
Good to know Greg. I had looked at these type of ultrasonic cleaners years ago and didn’t buy one because of the noise level. I have about 75 LPs left to clean with my Spin Clean a second time. It’s served me well with 600 LPs. Ultrasonic someday, maybe👍👍
I've had a Humminguru ultrasonic cleaner for about half a year now and I think it works great. It was a little over $400 so obviously no comparison to the much more expensive cleaners, but it hasn't killed me so that's a plus, too. I never really cared for the Spin Clean and, you're right, way too expensive considering it's a big piece of plastic with some rollers and pads.
I'll never understand why people say the SpinClean is too expensive. Try making one yourself.
Like I said. Could be made and sold for 30-40 for what it is.
@@VinylRundown sure, in China, but does that mean it's overpriced? It's literally the cost of 3 new records.
There are a couple other brands that are the same design but $45 to $55 and also come with a drying rack that fits into the base. Studebaker and Knox Gear. I got the Knox and it seems to work well. The yellow color of the spin clean would be preferred to see the solution color, others are black.
Personally, I am perfectly happy paying more for US made items over Chinese crap and supporting communism.
Regarding Spin Clean, I have been using it for 5-6 years, and it is an amazing cleaning product. I use it on ALL used vinyl. Nothing better at getting alot of grime, grease and finger prints off vinyl. I also use ultrasonic after Spin Clean to get down in the grooves where Spin Clean may not get.
The Vevor ultrasonic record cleaner was not recalled. It was three other Vevor ultrasonic cleaners - Model: JPS-08A, Model: (JM-316):040S and Model: (JM)-020
OMG I am glad I found this video. It's not just that vinyl cleaner, it's ALL of them, pretty much. Including the Vevor JM-3OA 30 Litre one that many CZcamsrs are pushing....it's apparently not earthed or fused, so the UK government destroys them if they are found at the borders!
I commented this on a big recent paid promo review here, and got my comment removed so I reported the video.
This is frankly dangerous the people taking money or free (killer) items for pushing these things when they don't meet basic electrical standards.
I made my own ultrasonic cleaner. It rivals any cleaner out there. My LPs come out so f-ing clean, I’ve pretty much ditched everything else… usually 15 minutes slowly rotating is all I need to use (all new LPs get this treatment first).. sometimes I do two or three treatments ,, but usually 30 minutes for a used LP (even a thrift store find) is all I need.
The only product I add to the distilled water in the cleaner is two or three drops of dishwasher rinsing aid or two drops of Dawn dishwashing liquid, and that’s only to act as a surfactant. no possible way to harm the vinyl.
When they come out of the ultrasonic cleaner I have a pump style hand sprayer that’s filled with distilled water to rinse off all of the excess from the cleaner, I then microfiber wipe, and voila… ultra clean LPs
Thanks for sharing this shocking revelation 🙏
I have a home made wet-vac system I use for my personal collection, but I use twin SpinCleans for all of the records I sell at my store. They work great, when used properly. Rinse really filthy records off in the sink first, overfill the SpinClean, use the first for cleaning, the second for rinse in distilled water, and use the cloths to dry and a good drying rack.
Have you considered the Humminguru cleaner? I want one but the spousal approval factor isn't in compliance.
Considered it but let’s see if this thing get resolved or not. Slight chance they might fix it. Doubt it! Thx.
Tell her you can clean her jewelry with it
Or tell her to chill TF out! You married guys and your "permissions"... 😂@@Pluralofvinylisvinyls
@@tima.478 I’m single. The days of sneaking my new records into the house after she goes to sleep are over!
Good man, you saw the light! 🤣@@Pluralofvinylisvinyls
Thanks Greg
Did this apply to all models or only the models listed
The two links included show multiple products from Vevor
I am almost 100% sure that using a SpinClean cannot cause any electric shock.
I like the cut of your jib. Subscribed.
Thanks! Thought you were just stalking me. Which is fine too. ☠️
The knosti disco antistat costs much less than the spin clean.
It TOTALLY cleans your records--BUT it might KILL you. Get the 80 dollar record cleaning bubble machine.
Shocking truth, I see what you did there.
Thanks. I noticed he kept saying “shocking” so was waiting to be shocked but now I can relax
Spin clean in china will be few $ but they need to earn something..
But if you ordet a thousands of cleaner, it will be under 10$ for sure. Depend from where you buy.
Mine seems pretty solid re. connections. It just sits there while I oversee it working. Plus USA allows it. The cords are to the back of it and all the work is to the front. Probably thousands of units have been sold. Not one story yet of electrocution that I know of.
Not UL listed or approved.
Yes, I take your point. Not good. Thanks for the heads up. @@VinylRundown
He's a little dramatic talking about house fires. I was here to get his comparison between a Spin Clean and the Ultrasonic. What I had to click out of half way through was a host who couldn't simply state his point and explain his results with each cleaner. In all honesty I don't need the endless side stories and dramatic asides.
R I I I I G H T ? ! ! ! !
He said, “ This is going to be a quick . . . . . review.”
🤦🏽♂️🤦🏽♂️🤦🏽♂️🤦🏽♂️
I did not finish the video. To slow of vocal cadence.
Funny. There is a spin clean made in China. It’s called Studebaker record cleaning machine. Cost about $40.00 on Amazon a few years ago when I bought it
Studebaker is made of wooden pressboard, right (weights 3 pounds)- so is not designed to be filled with water - water will warp the unit and eventually lead to bad mold problem. With studebaker you just spray the fluid onto the pads and don't actually submerge the LP in water. correct?
Nope. The exterior is MDF. The interior tank is plastic molding. At least it looks and melts like plastic. (i heated a sewing needle to see if it melts or burns) The inner tank is the same material as the rollers and the brush casings. I’ve been using it with distilled water in the tank for 2 years. No warping or Odor is present. However, the instructions say nothing about filling the tank with water.
Their is space between the inner tank and the exterior MDF. So I can see how water could get in between them, but the MDF is nothing more than a base to hold the tank.
What state is he workimg in. Texas has no such employer laws. Like health insurance............
When I think of American made now days. I think made in China and assembled in America by an under paid overworked employee who does not care, and is just ring to survive. American made and quality I fear is a thing of the past. Now it is not all like that much like not all things in China be bad.
Use it out back on a GFI ext cord with yellow rubber dish gloves, problem solved…
That's not exactly how product safety works but OK for some people who know about electrical.
@@VinylRundown I was kind of joking and kind of not. I mean if you have the product and they are unwilling to refund or replace it with a properly and safely manufactured product you might as well not let it go to waste :-)
It may be ridiculous that they can sell these types of products and it may not be the safest, but you can probably still utilize it in a way that would negate any catastrophic failures/damage???
So are we having chicken tonight or not? 🤪😜
Doesn't ultrasonic cleaning wear out vinyl?
All cleaning damages vinyl (or whatever its cleaning) slowly, microscopically. Water is less damaging than brushes. Go easy on whatever yo are cleaning.
So…..if I buy a Vevor I’m opening it up and and taking my soldering iron to the power and ground connections.
Hope ya know what you’re doing! Good luck.
get it checked by an elec tech. earthing should be easy to fix!!
Already got a refund - there are multiple issues with this design. How much would you pay a tech to fix something that only cost $169 ?
So this turned to another China hate video. How do you go outside? It can be dangerous. This has sold so many and lot of positive reviews. There are maybe more than 20 brands and all are same. Yes some cost $150 and some +$500 but you get the same. Grow up.
You are welcome to buy it, a country with no product safety standards, no osha worker protections, no pollution controls, no workers rights. I got a full refund due to the product recall. I hope the Chinese people will achieve more freedom someday.
@@VinylRundownGot the product and it is completely safe. Live ground and earth wires are connected properly, therefore no issue whatsoever from getting an electric shock...
If you are so worried about those Chinese people, I just hope you are not a hypocrite and you have not a single product at home that was made in China.
But why are you pouring your cheap propaganda into ultrasonic vinyl record discussion? Are you tired of counting the genders or what?
@@danender5555 35 of their products have been recalled for safety issues including 9 ultrasonic cleaners. I'm just sharing info that the vinyl community wasn't aware of. I reserve the right to be a hypocrite. You are welcome to go tell the UK product safety people that its safe. www.gov.uk/product-safety-alerts-reports-recalls/important-safety-message-product-recall-for-vevor-branded-products
@@VinylRundownI do not care about informing any officials about anything.
However, any electric product must be used properly when the water is involved.
You do not use safe hair dryer standing in the bath, for that, I hope, you do not need officials to tell you what to do.
But as a hypocrite you do not care about vinyl community but political propaganda instead. So while having a public safety and world peace in your mind, you can glue yourself to the motorway...
Yes Greg, the wage slaves in USA r treated a bit better than some of them in China.. The owners and controllers in USA don't give a toss either.. Ur bias is laffable
Thanks for laffing. No idea watchu talkin bout. We have OSHA and workers comp. They do not.
"THE SHOCKING TRUTH" come on mate.
Shocking.. get it?
Only sold in 200 countries. I say you are full of it.
The safety recall notices are posted in the vid description. Tell the UK.