Yes! someone who appreciates the exhaust note and not just making it louder than hell and thinking it sounds good the louder it is. Ive learned over the years i enjoy a good sounding exhaust over a loud one. Nice truck man. Sounds great.
I must say Super Stan, thank you so much for actually replying to comments. Nothing worse than scrolling through the comments and seeing every ones actual questions with nothing below.
Like I said great video. 😂 I’m thinking of running dual carven tr on the end and two in place of the center resonator of my v8 5.5l na coupe. Do you think it will still have a good aggressive sound or would that be too much muffling? I daily drive and didn’t want the loud early morning cold starts.
Super helpful content, I just got a carven R25 installed on my truck yesterday and it Sounds great but the welding wasn’t as nice as yours but it will hold lol
Did you ever notice any performance gain in either muffler that you're taping on on this particular CZcams video. And you made mention about the Corsa exhaust. Any performance gain on that one or MPG improvement?
I truly don't pay attention to MPG with this truck at all. If you want more MPG I wouldn't suggest modifying a truck like this, you’ll never get any better than what it offers from stock. Performance; this setup is already maxed out so a simple muffler change has no effect on it. The mufflers I took off allows more flow, so in theory that will give the best performance; Carven-R
Just depends if you want the more aggressive and loud version over the more tame setup. Mine was just too loud for daily driving and things like that so I decided to tone it down.
I have a 99 Chevy Silverado extended cab, I put headers and deleted the cats and resonators and has a flowmaster super 40 series, Recently I’ve been wanting something better and I came across the carven TR series, seeing your video I’m sticking to getting it but would it sound rougher since I deleted the cats and resonators?
I’m thinking about getting a truck the guys truck is about 9 hours away from me. He says it’s a 5.3 swap but it was originally a 4.8. Can you tell me any ways to know if it’s a 5.3 or 4.8?
Bryce Howard there is no way to tell without taking the motor apart. The both say 5.3/4.8 on the block. But inside the engine bay it’s completely covered up. I wouldn’t buy it if it isn’t a true 5.3 VIN truck, but that’s just me.
@@Stan1le thanks I’m putting the truck Norris cam in my Silverado next week I got shorty headers and TBSS intake but I loved the way yours sounded with the R’s on I want to get close to that sound as possible
I've got the TR and been thinking about the R but I just dont like that cackling raspy sound, sounds like shit to me. That TR is quiet with a nice roar unless you get on it. Love it
Super Stan And what’s the names brand? I’m sorry for all this question I’m just really trying to make my truck like yours! You really inspire me a lot to keep on working in my truck! I thank you so much! May god bless you!
Super Stan hmm 🤔 can you at least hear it on the inside of the cab? I’m running dual mf bullets on my truck with headers and high flow cats as well. I love how it sounds, but if it was literally a hair less noise on the inside of the cab, it would be perfect. I’m used the growl of the carven r so I know I will like the tone of the tr as well. I just don’t wanna get a new setup and it’s nonexistent in the cab
Ok that’s great! I might have to try it out. My setup now isn’t obnoxious either and the drone is slightly more than minimal since I have dumps less than a foot from the ground 😅. But just on light acceleration in city driving, it can get pretty noisy on the inside. The radio can stay at a decent volume though. My biggest thing is, I’m kinda past the “loud for no reason” phase and wanna branch out to something that’s just noticeable at idle and screams at high rpms
TrentFiveTree yep I’m kind of over the loud stuff as well. I need more of a happy medium like you said. This setup isn’t bad at all. I’ll stick with it for a while.
How is the drone I know the R has almost none. But my car is like yours was to loud. But I’m so afraid to switch to the TR and get drone. Did you get more drone with the TR?
I actually had a little drone with my R series and now I don’t have any at all using the TR. But my exhaust is a little unique so it’s not the best comparison.
@@Stan1le dude i just finished up the long tubes no cats with the carven .. you are correct the R series is insanely loud.. ill be changing mine out as well.. way too raspy at wide open
Gotta love the ol shit guns. Those welds do look pretty bad tho lol ive done plenty of exhaust work with a crappy welder and none have come out that bad lol
Yes! someone who appreciates the exhaust note and not just making it louder than hell and thinking it sounds good the louder it is. Ive learned over the years i enjoy a good sounding exhaust over a loud one. Nice truck man. Sounds great.
Couldn't agree more!
dude seems like a legit decent guy. gotta love that
I must say Super Stan, thank you so much for actually replying to comments. Nothing worse than scrolling through the comments and seeing every ones actual questions with nothing below.
I try to do what I can to help out!
Like I said great video. 😂 I’m thinking of running dual carven tr on the end and two in place of the center resonator of my v8 5.5l na coupe. Do you think it will still have a good aggressive sound or would that be too much muffling? I daily drive and didn’t want the loud early morning cold starts.
Sounds awesome👍
Truck sounds great. Bowen does good work.
I think so too!
Went from the R to TR as well with a original resonator. Much quieter for the fam
Xavier good idea
Super helpful content, I just got a carven R25 installed on my truck yesterday and it Sounds great but the welding wasn’t as nice as yours but it will hold lol
as long as it holds thats all that matters!
sounds clean!
All thanks to you guys!
Did you ever notice any performance gain in either muffler that you're taping on on this particular CZcams video. And you made mention about the Corsa exhaust. Any performance gain on that one or MPG improvement?
I truly don't pay attention to MPG with this truck at all. If you want more MPG I wouldn't suggest modifying a truck like this, you’ll never get any better than what it offers from stock.
Performance; this setup is already maxed out so a simple muffler change has no effect on it. The mufflers I took off allows more flow, so in theory that will give the best performance; Carven-R
Real nice video man
Thanks
So overall do you like the progressive over the competitor? I can’t seem to decide over the two I like different things about each. Any advice? Thanks
Just depends if you want the more aggressive and loud version over the more tame setup. Mine was just too loud for daily driving and things like that so I decided to tone it down.
Damn that sounds good
N Motion. An Automotive Channel. Thanks buddy
Were you in the military as a maintainer? I noticed the remove before flight on your keys
Currently deployed with the Navy.
Bowens welds look better because theyre mig welded. The first one looked like it was welded with a flux core welder
I have a 99 Chevy Silverado extended cab, I put headers and deleted the cats and resonators and has a flowmaster super 40 series, Recently I’ve been wanting something better and I came across the carven TR series, seeing your video I’m sticking to getting it but would it sound rougher since I deleted the cats and resonators?
Yes! R series would be ridiculously loud and drone alot
Super Stan I appreciate your reply, thank you and if you don’t mind me asking which inlet did you go with for your truck, the 2.50 or 3 inch?
i think both sounded great, the R series was definitely louder for sure. are you running a cam on that truck?
Yes I am!
@@Stan1lewhich cam
How was the drone with the R Series?
Chris Alvarez no drone
Would this exhaust do well on a 2011 bmw 328i 3L inline 6?
I couldn’t even begin to tell you. That’s a very subjective question, guess you would just have to try
Represent C town 👍I bring all my shit to Bowen
No x pipe? I love the sound with it.
SC2003 I wanted one but would have to redo the whole exhaust so it wasn’t worth it
I have the tr series with a x pipe if you wanna see. Gm 6.0
Would my stock 4.8 Silverado sound louder with no muffler at or with a Carven R?
Either one would be very similar. Muffler would just have more drone, but it’s cheaper
@@Stan1le thanks!
I’m thinking about getting a truck the guys truck is about 9 hours away from me. He says it’s a 5.3 swap but it was originally a 4.8. Can you tell me any ways to know if it’s a 5.3 or 4.8?
Bryce Howard there is no way to tell without taking the motor apart. The both say 5.3/4.8 on the block. But inside the engine bay it’s completely covered up. I wouldn’t buy it if it isn’t a true 5.3 VIN truck, but that’s just me.
Super Stan I’ve been looking for one for forever and this one is super clean I’m just confused why they swapped a 4.8 out for 5.3
Bryce Howard could be a number of reasons. But they might think it’s a 5.3 but could be another 4.8 too. Just never know
Super Stan how much did you pay for your muffler replacement?
How was the exhaust ran with the R series I want mine to sound like yours did before you changed to the ts
Just a true dual exhaust with headers and high flow cats. Not much to it.
@@Stan1le thanks I’m putting the truck Norris cam in my Silverado next week I got shorty headers and TBSS intake but I loved the way yours sounded with the R’s on I want to get close to that sound as possible
@@davidbrunson4109 shouldn’t be too hard! Good luck
Been trying to give you time and see if it had a chance to 'break in' yet? How much louder did it get?
Brandon Denton no too much. Still a noticeable difference between the two
How would you compare it in loudness compared to the r?
Brandon Denton if the R series is a 8/10 these are a 6/10. Probably a 5/10 when they first got put on
Perfect analogy, thanks!
Brandon Denton I try to help when I can!
Which end is the inlet on the tr
jrw100990 they flow either way. But I put the Carven logo closer to the back
Good job
Thanks!
I've got the TR and been thinking about the R but I just dont like that cackling raspy sound, sounds like shit to me. That TR is quiet with a nice roar unless you get on it. Love it
Yes I agree! I enjoy mine so much now.
The R series doesnt crackle on the 5.7 Hemi 🤣🤣
Must be a chevy thing
Hey Stan quick question, can you send me the link in where you got your bed cover I need one and my truck is exactly the same! PLEASE AND THANK YOU!
Jonny Hernandez don’t have the link. Just bought it off eBay years ago
Super Stan
And what’s the names brand? I’m sorry for all this question I’m just really trying to make my truck like yours! You really inspire me a lot to keep on working in my truck! I thank you so much! May god bless you!
@@jonnyhernandez8991 Damm bro me too but the one I'm looking for is for a StepSide which is way harder to find.
just ordered some for my camaro
Nice!
Nice sounding truck! but i think the cherrybomb glass pack sound just as good and are louder
Cesar Menchaca and that’s exactly what I didn’t want so that was never a option
He didn't want it louder.
Plus the way the Carvens are packed they will live twice as long.
💯
Wait is the exhaust catted?
Batman The Dark Knight yes it is
stan1le vs slowvert racetruck vs racetruck??👀👀
Slow.Vert racetrucks sounds like fun! It will be at S2S so let’s do it
How is it on the inside on long trips? Considered doing this setup on my truck
TrentFiveTree not even noticeable. That’s never been a issue
Super Stan hmm 🤔 can you at least hear it on the inside of the cab? I’m running dual mf bullets on my truck with headers and high flow cats as well. I love how it sounds, but if it was literally a hair less noise on the inside of the cab, it would be perfect. I’m used the growl of the carven r so I know I will like the tone of the tr as well. I just don’t wanna get a new setup and it’s nonexistent in the cab
TrentFiveTree yes you can definitely hear it inside but it’s no where near obnoxious and no drone
Ok that’s great! I might have to try it out. My setup now isn’t obnoxious either and the drone is slightly more than minimal since I have dumps less than a foot from the ground 😅. But just on light acceleration in city driving, it can get pretty noisy on the inside. The radio can stay at a decent volume though. My biggest thing is, I’m kinda past the “loud for no reason” phase and wanna branch out to something that’s just noticeable at idle and screams at high rpms
TrentFiveTree yep I’m kind of over the loud stuff as well. I need more of a happy medium like you said. This setup isn’t bad at all. I’ll stick with it for a while.
What brand and cam is that
Gilbert Munoz Texas Speed
@@Stan1le what stage of cam it is from 1-4 can you tell me the part number of it
Gilbert Munoz custom grind, no part number
How is the drone I know the R has almost none. But my car is like yours was to loud. But I’m so afraid to switch to the TR and get drone.
Did you get more drone with the TR?
I actually had a little drone with my R series and now I don’t have any at all using the TR. But my exhaust is a little unique so it’s not the best comparison.
I have a magnaflow x pipe and 2 tr series. Gm 6.0. No drone.
Can i install this in my 2017 gmc sierra with stock piping?
Maui Boy sure can!
Super Stan thank you, i will for sure buy me one of these.
love my carven R.. but long tbes are going on this weekend so hopefully its not too loud
DudeItsShags good luck with that!!😅
Super Stan I’ll have to make a video next week lol
@@Stan1le dude i just finished up the long tubes no cats with the carven .. you are correct the R series is insanely loud.. ill be changing mine out as well.. way too raspy at wide open
DudeItsShags crazy! Right? Easy change though so no biggie
@@Stan1le yes sir.. thanks for the inspiration with these videos man
As a welding inspector the guys who welded that muffler they sure do suck. No wonder u had exhaust leaks.
Gotta love the ol shit guns. Those welds do look pretty bad tho lol ive done plenty of exhaust work with a crappy welder and none have come out that bad lol
First #notificationgang
Leek 2 times guess I’m famous now!
8:41 you need some mandrel bent piping 😢
Magic Toaster truck doesn’t make enough power for that to make a difference. Prioritize other parts and areas first.
Was this catless
No, it has high flow cats
wasting money
how?