Have you EVER Seen This! DIABLO Owns it!
Vložit
- čas přidán 10. 10. 2021
- #shorts VOLUME ALERT Finally a multi-tool blade that actually works on metal! Check out DIABLO!
------------------------------------------------------------------------------------
Connect with us!
Instagram- / toolsinaction
TikTok- / toolsinaction
Website- toolsinaction.com/
Shopping- amzn.to/3rd5OXU
Tool Forum- forum.toolsinaction.com/
Tools in Action Gear- toolsinaction.com/tia-gear/ - Jak na to + styl
It's a master lock, just hit it with literally any slightly heavy object and it will pop right open.
I was thinking the same thing. I taught myself to pick locks, and Master locks are a joke. YOu can open most Master padlocks with a plastic bic pen cap in under a minute.
Hardly the point of the video
The video is not about how secure the lock is. Focus, guys.😅
Yes hit the lock with something so he can break into that vice 😂
You clearly missed the point entirely.
They are just trying to show how well the blade works, NOT that it's better than a grinder or bolt cutters. Few years ago no one would have even attempted this with oscillation tool.
This is actually very impressive most blades burn up after one nail
At least some people get it!
Little tip to help not burn blades up is to put very minimal pressure on it and a super high speed 👍
Having the right blade helps🙄
That’s why I’m here I’m doing research on which ones will be the best
Most Titanium filled blades don’t burn up after 1 nail… it’s more like after 4 nails. EZARC makes pretty solid blades
I’m finally at the point in my life where I can buy the Diablo and Lennox blades.
Now do a drywall screw....
It eats it like you would eat a chocolate bar, very impressive blades
Hardened master lock way harder than a drywall screw. No sense.
@@TheSaw410 woosh
@@TheSaw410that lock is hardened on the surface if it were hard it would crack with a bump of a hard face hammer they dent or pop open
Angle grinder with a cut off blade would do that in 5 seconds.
And a Oxygen-Acetylene Torch would’ve done it in .5 seconds
yup
2 spanner’s would have done it in 1 second!
what about a bandsaw 3 seconds?
One look at my nuts and the lock opens itself
lockpickinglawyer opens it in 1 sec 😂
I use this to cut hard to reach rusted bolts, still one the same blade
thats quite impressive actually.
ONE of the greatest videos ever released on you tube ❤
All depends on what your cutting. Those only last me 3-4 door frames when cutting in electric strikes. I still use them because they are better than the milwaukee that last 2-3 and are a bit more expensive.
This is a master lock series 0069, it can be opened with a master lock series 0069. Bang!
I think it’s super dope but there are probably better tools like bolt cutters that could turn this 2 minute problem into 5 seconds 😂
No shit. Not the point of the video dingleberry
LPL would turn this video in to 3 seconds just by looking at this lock 🤣🤣
I think theyre just showing how good the blades are
It’s a demonstration on the blade’s ability not the tool of choice for this “problem”
Lock picking is even faster, most will disagree mainly because they havnt actually seen the correct ways and different methods. But, If you have studied lock picking and the different types of jigs and gadgets then you know for this job it’s silent, quick and doesn’t damage lock.
Average picker can get this open in 60’sec. Above average with a more accurate pick set up will have it open in 20 sec
It won’t cut butter when finished. One solid hit with a 26 oz hammer and its done.
That was a good lock.
That is impressive!!
The neighborhood burglar watches these. Thanks!
If he does and he uses that multi-tool he's an idiot cuz he's going to jail. plenty of other quieter faster tools than that
Mate the burglar would wake up the entire district with all that fucking noise this tool makes🤣🤣🤣
He's doing people a favor by showing how to keep the burglar there till the police show up. In fact they won't even need to be called because they'd here this shit going on from the station
@@meyes4860 police ain't coming in 2 minutes
Master locks don’t need to be cut lol. Kinetic energy is the key
LPL opened 48 locks in the time it took to cut through this. 😂😂
I had to time this with a calendar
Use 2 open-ended wrenches. No noise, quick and easy.
I am completely sold
Bro… all you need are two paperclips to open that lock up 😂
Why though I could if had it cut with a hacksaw in a 1/4 of the time
It’s a master lock. Just open it with your hands
That blade probably cost 10x times more than the lock! 😂
They are usually on sale 2 for 20. If you work in remodeling homes, these are time and money savers. Nails and screws stand no chance
Will these blades work on a bauer oscillating tool?
Mrs. Lock Picking Lawyer decides to give it a try.
all i can hear is mcnally saying “your using a master lock it can be opened using a master lock”
A good set of bolt cutters work just as well, if not better
Im sold
That took for ever!!
I meen its impressive that u cut a hardened lock with a sheet rock tool but could hav dn it quicker with a file
*three miles away… hmmm I know that sound*
Will their blade fit dremel???
Damn Diablo
Everything owns master lock. Definitely wouldn’t of wasted up a blade on that kinda lock for sure
I'm trying to figure out which one to buy and I was scrolling through and saw it cutting it hardened steel lock. I said oh yeah I'm getting it
sure but i would never need it to get into a master lock
Idk why ppl still do this. We always had a lock pick gun. So if we went to get to a job site and we had to wait on someone with a key to let us on property, sometimes for the whole day, just grab kit out, put in battery and locks open in a second or 3
bolt cutters are cheaper, faster, and quieter at 3:00 am
You do know that's a master lock. When you know you know
Grinder is the quickest but that'll work in a pinch
Great tool I use one all the time but for this sawzaw unless you don't have one
Lock picking is even faster, most will disagree mainly because they havnt actually seen the correct ways and different methods. But, If you have studied lock picking and the different types of jigs and gadgets then you know for this job it’s silent, quick and doesn’t damage lock.
Average picker can get this open in 60’sec. Above average with a more accurate pick set up will have it open in 20 sec
"I gotta steal me one of these"....says the crackhead 😂
Nice camera
Or just jam in a rake pick and unlock it silently in seconds 👌
I need a couple of those. Thanks for the reminder.
You bet
Sawzall with a Diablo blade takes these down in a tenth of the time.
Faster to pick it.
Why don't you just sneeze on the lock? That will open any masterlock.
Milwaukee blade will do it but carbide will chip, dremal will do it without issue carbide will be untouched, so yeah I've seen it and done it
MasterLock😅 you can literally cut it with a wet noodle😂
My Diablo holes away kit is practically made of glass.
Bolt cutters are your friend and they are silent.
cutting through a Masterlock is not a flex.
Angle grinder?
Bolt cutters did it in 2 seconds
Needs to be on a better tool but it looks pretty good
Diablo is all I use as a crime scene cleaner , reciprocating saws, circular saws etc.
Wait, what does a crime scene cleaner do with a circular saw?
@MrTravisAI we don't just clean like a janitor would it's much more in depth, not as simple as a mop and fabuloso, there's the initial cleaning of visible/gross contamination using different chemicals depending on the situation and severity, structural work/removal of thi gs such as subfloor,drywall etc. , sorting, cleaning and disinfection of personal property affected, cleaning, disinfection and deodorizer of usually the entire room . After all the remediation services are completed we then come in to replace and repair any and all structure removed during the initial cleaning process.
Grinder bolt cutters
honestly a cut off wheel would be way more efficient even on a dremel
Just use bolt cutters. Or pick it.
I could’ve used that yesterday 😓
Pretty cool
That's a master lock. You could tap that thing with a rock and it will open 😂
Why is everyone saying “there are better tools for this…”? Of course there are better tools to do this, that’s not the freaking point… it’s just to show how well made these blades are.
3 BATTERIES LATER
.045 cutting wheel on a grinder would smoke thru that in seconds
Roll it over we’re the key go’s in and drill out the pins, just get a good bit
Locks are for honest people .
An angel grinder can do it in like 2 seconds
Sweeeeet!! TIA#1!!
WOW !!!!!
It's a master lock. Just give it a good hard frown, and it'll open.
Well it's a master lock so you can just hit it with another lock and it'll pop open..
Bolt cutters, 2 seconds.
Two 13 mm box end wrenches and 3 seconds later.
Wouldn’t be easier with the 🔑 sir? 😂
just wasted a perfectly good lock
I will get one
That is not the point Guys....
It's how you can Cut some things like that....!!!!
Get a 4" grinder
Two open end wrenches will break it open a lot faster than that.!
Yes Most of the time. I lost my key to my shed and tried this with a cheap no name set and they bent. A good quality set and it's crazy how fast it happens.
Don’t show this to any crackheads 😊
According to the catalytic converter thieves, this is a fail
O good I feel with my tools
What kills me here, and don't get me wrong, I'm all for oscillating tools; they reach in spots at times NO other power tool can because of their design....but why would you wanna use an oscillating tool to cut a padlock? Isn't there an angle grinder's blade designed for this?
I don't know, maybe this blade here is for folk who don't have access to a grinder. I really don't get it.
It's a masterlock, a potato could do that
Why not use bolt cutters????
Great give tips for thieves this Christmas 🎄⛄🎄
I can do it faster with a small hammer, tap it and it unlocks
But it’s a master lock , you could open it by hitting it with another master lock , or a rock
McNally can open this lock about 50x faster
I shave with one of those every day
Stealth cut.
3 Hours Later…
Wow these comments disappoint. You peeps don't get what his point is.
That shits for wood screws
Takes too long lol we are already busted trying this break-in