man i've followed a few of your videos for setting up pi vpn and pi hole and i was doing good until I got to setting up wire guard on portainer, and the dns step on the vpn installer on pi. idk if you see this and would't mind helping a novice out i'd greatly appreciate it.
I have been thinking about getting a VPN client for certain things at the home, can I install PiVPN on my current PI server not worry about those other VPN clients and pay vis using the WireGuard and have my own VPN server?
Hey Carmine - any chance you might take a look at Tailscale and show how to setup using a server at home (Linux/Proxmox/etc) and how to access different services/containers? Was thinking about this might be a solution to access Crafty?
tailscale is deff a good option to access a local machine i can sure look into hosting it in a container. you may always want to check out cloudflare tunnel. you can forward your dashboards to a domain with it and use different subdomains to split which one is which. i’ll look more into tailscale server and see if i can get a video for it for ya
@@BarmineTech I’ve struggled with Cloudflare. I can get open tunnel established with difficulty but then it’s wide open. I can’t get the secure side to work. I have ddns going with Cloudflare due to non static ip. Not sure if it is a Starlink thing a Omada thing or my newbie sldumbness
ya you need to port forward whatever port you choose for the vpn. do not open 53 up for dns tho. you can use the same client for multiple devices but they can’t all connect at the same time then
Yo is there anyway I could just pay you to finish setting this stuff up for me. I got to portainer, and I am stuck at trying to get my wireguard stack to launch. I can connect to wireguard vpn but i dont get internet. thanks.
@@BarmineTech Great. I will try it. Currently I have it running on a Pi4B with 1GB which is overkill especially since I have a ton of 3B+ laying around. 3 Questions: Why pick the 32bit version of Pi Lite and not the 64bit? Is the version Bullseye or Bookworm? Can I use Dietpi and if so what version of that? Thanks in advance.
Sorry if this is a stupid question but if you have the desktop raspberry pi OS installed does pivpn remove the gui? Installed pivpn the other day on my pi and on reboot it just opened the terminal only full screen with no gui at all. Kind of confused
two things: isn't it just obvious that a power supply will be needed ? and what was the challenge not to have anything added in the comments to allow copy and paste any commands ? info was somehow useful thou, but lets try and see if this works, did not want to see this video to the end .. I will try AWS + openVPN
i just like to be nice and clear when going over stuff for a video, some people might be new to raspberry pis and might not be familiar. also in the description i have links to write ups for the commands. next time i’ll add them to the description
Dude! I was trying to solve it for hours but then i fixed it with your video. You are amazing. Keep the good work up!!
Glad I could help!
One of the best and comprehensive videos on the subject without being 45+ minutes and not explaining very basic concepts.
This is the most comprehensive explanatory video on CZcams on this subject, thank you bro.
Glad it was helpful!
I just discovered this channel today, and I subscribed. It's like you knew exactly what I was looking for! I appreciate your hard work Chief.
Welcome aboard!
Thank you so much for this tutorial. Best video on pihole / VPN. Subbed.
Glad it helped!
A subscribe and a like, because after so much time looking how to make it happen, I finally did it thanks to your video
delightful lesson and very informative! Thank you!
You're very welcome!
Great as usual, thanks Carmine.
Great video and quite detailed
Nice video! Really helps out
man i've followed a few of your videos for setting up pi vpn and pi hole and i was doing good until I got to setting up wire guard on portainer, and the dns step on the vpn installer on pi. idk if you see this and would't mind helping a novice out i'd greatly appreciate it.
I have been thinking about getting a VPN client for certain things at the home, can I install PiVPN on my current PI server not worry about those other VPN clients and pay vis using the WireGuard and have my own VPN server?
Hey Carmine - any chance you might take a look at Tailscale and show how to setup using a server at home (Linux/Proxmox/etc) and how to access different services/containers? Was thinking about this might be a solution to access Crafty?
tailscale is deff a good option to access a local machine i can sure look into hosting it in a container. you may always want to check out cloudflare tunnel. you can forward your dashboards to a domain with it and use different subdomains to split which one is which. i’ll look more into tailscale server and see if i can get a video for it for ya
@@BarmineTech I’ve struggled with Cloudflare. I can get open tunnel established with difficulty but then it’s wide open. I can’t get the secure side to work. I have ddns going with Cloudflare due to non static ip. Not sure if it is a Starlink thing a Omada thing or my newbie sldumbness
Do I have to do port forwarding and assign client to each devices to be used?
Thanks
ya you need to port forward whatever port you choose for the vpn. do not open 53 up for dns tho. you can use the same client for multiple devices but they can’t all connect at the same time then
Yo is there anyway I could just pay you to finish setting this stuff up for me. I got to portainer, and I am stuck at trying to get my wireguard stack to launch. I can connect to wireguard vpn but i dont get internet. thanks.
like walk me through it in a skype call or something
does it make a difference if we install pivpn first and then pihole?
not really, there’s just an option in the pihole installer to add pivpn
good video
So wait! You can have pinhole and pivpn running on the same pi sbc?
sure can!
@@BarmineTech Great. I will try it. Currently I have it running on a Pi4B with 1GB which is overkill especially since I have a ton of 3B+ laying around.
3 Questions: Why pick the 32bit version of Pi Lite and not the 64bit?
Is the version Bullseye or Bookworm? Can I use Dietpi and if so what version of that? Thanks in advance.
Sorry if this is a stupid question but if you have the desktop raspberry pi OS installed does pivpn remove the gui? Installed pivpn the other day on my pi and on reboot it just opened the terminal only full screen with no gui at all. Kind of confused
not a stupid question! but i’m not sure i don’t really use the raspberry pi os gui i always instal on the life version that’s terminal only.
@@BarmineTech thanks for the response! Pivpn suggest installing on lite but I couldn’t find anything about it messing with the GUI on the full OS.
Can i do this on a extra laptop as my pi is running octoprint soon klipper
you can install both on an old laptop, best method would probably be to make a docker environment and run both off of that
Or you can get a PoE hat and ditch the power brick. I'm assuming your switch isn't a PoE switch?
at the time i may have not had it working but do now and works great!
no unbound?
not in this video
Will a pi 3b+ work?
sure will, even will on a pi zero
two things: isn't it just obvious that a power supply will be needed ? and what was the challenge not to have anything added in the comments to allow copy and paste any commands ? info was somehow useful thou, but lets try and see if this works, did not want to see this video to the end .. I will try AWS + openVPN
i just like to be nice and clear when going over stuff for a video, some people might be new to raspberry pis and might not be familiar.
also in the description i have links to write ups for the commands. next time i’ll add them to the description
Fernando your attitude stinks pal.