Hydra & Aquilla Intelligent Toilet Installation Guide
Vložit
- čas přidán 11. 07. 2021
- Important Installation Requirement
1. Minimum water flow rate 5L or more in 15 seconds.
2. From the wall to the centre of the waste pipe, the minimum distance should be 300mm ~ 400mm.
Pairing The Remote
By default, the remote will be paired with the unit. If not, follow the below steps.
1. Make sure the adaptor is plugged in and powered on.
2. Press and hold the flush/auto button on the intelligent toilet for 5 seconds. (Until the screen starts blinking)
3. Press the "Stop" button on the remote, and the screen on the toilet seat will stop blinking, confirming the remote is paired. - Jak na to + styl
What d hack no screws ?
I was thinking the same thing. That 💩’s going to slide around, “literally”!
Is that available in Australia?
How do you turn off automatic flushing?? Please respond!
Long press "Auto" button on the remote to turn off the Auto Flush feature.
How is it mounted to the ground now
A clear/white silicone will secure the toilet as it is 3 times heavier than a standard toilet, around 47 kilos.
@@TradeDepotLtddoes that meet the international plumbing code? No bolts?
@@TradeDepotLtdwhat happens when the pipe clogs? No flange. No bolts. Water gets into the floor.
Dimension sir?
Please check the below links for dimensions, specs and features.
SKU 230164 | Hydra Smart Toilet - tradedepot.co.nz/vogue-hydra-intelligent-toilet-suite/
SKU 230163 | Aquilla Smart Toilet - tradedepot.co.nz/vogue-aquilla-intelligent-toilet-suite/
Why is the toilet instructions in Oriental language??
Hahaha all this videos don't show me how to secure the very expensive toilet to floor. But water base clear calkin is what is going to secure the toilet. It's bullshit and what a shame
I have Modern Smart One-Piece 1.27 GPF Floor Mounted and it doesn’t move at all. You definitely need to remove the flange. So far it’s working for me.