H-King A-1 Skyraider with ORX Flight Stabiliser: ESSENTIAL RC FLIGHT TEST
Vložit
- čas přidán 1. 01. 2020
- H-King A-1 Skyraider with ORX Flight Stabiliser: ESSENTIAL RC FLIGHT TEST
AVAILABLE HERE: bit.ly/hkingA1Skyraider
Very little assembly required to get this super scale Skyraider in the air. Glue in the horizontal stabiliser with medium cyano or UHU-POR and connect up the clevis to the elevator horn. Attach the wing to the fuselage with the provided screw. Push in the landing gear legs and secure each with a screw. Attach the propeller. Glue on the scale bombs. Then all that remains is to install your receiver taking care to connect the flight stabilisation lead into the AUX1 channel and configure that against a 2 position switch on your transmitter so you can switch between Beginner and Expert modes.
Connect up a 3S800 lipo flight pack while the Skyraider is level on the ground and the stabilisation system will take a few seconds to arm. Check CG balance and orientation of flight surfaces with control inputs and you are set for your first mission. Take off in Beginner mode for the start of your first flight. In this mode the roll and pitch are limited and you are prevented from rolling to inverted flight. Switch to Expert mode and this limitation is removed but the stabilisation still smooths up any turbulence caused by the wind!
This Skyraider is very smooth to fly and so stable it can be flown in a relatively small space with ease if you keep the speed low. We tried some scale aerobatics and inverted flight and it could execute all with ease. A great value warbird to take to the airfield on the passenger seat of your car !
Filmed by Al for the 'Essential RC' CZcams channel using the Panasonic AG-UX180 Pro 4K camcorder. Dom flies the H-King A-1 Skyraider.
Don't forget to subscribe for regular 'Essential RC' action using this link / essentialrc
News, Reviews and Regular FREE Giveaways at / essen. .
If you enjoy Essential RC then please consider contributing to the improvement of our future projects by visiting / essentialrc - Auta a dopravní prostředky
This May not seem exciting for the better pilots, but for myself to be able to have help and when I start feeling comfortable to switch to excerpt and possibly pull off some of this , WINNER
THANK FOR SHOWING IT off
That is a epic little plane and it looks so real 👍😎
I like that, super! Thanks for posting.
Great review.. I've been looking at the planes in this series and they seem a pretty good value for money RC fun plane option to me.. I've looked at all the planes and the A-1 skyraider is now. top of my fun plane list.. I think I love it because it's a good flying unusual warbird... thanks for your great informative videos..it really is appreciated.. kind regards Dave 😁
great little scale bird there and love all the armory on it too also flies quite well in both the modes can't go wrong for the price for that quick after work fly at the local park .... cheers for sharing this Dom .
Thanks Andrew. Surprised how well it flew and no doubt that's down to the stabilisation system. Quite clever. At just over £50 I think it's good value as well considering how much scale detail it has. Cheers Dom (Essential RC)
I've been looking at this and the tempest I may just get both. Great video.
You should!
Tempest an Skyraider are the Two best Flyers in the series so far.
Beauty Glyn.
CRIKEY!
I thought I could Fly this Toy great?
Sick Stuff Dom,, Awesome Display Mate!
For a review it would have been nice to learn what battery you used, where it was placed and where the CG was?
Looks to be much better flyer than the Tempest!
good demo of beginner vs expert mode .this ORX flight stabilisator is amaizing good ! i dont understand why some peaple had problems with it i think you have to fly it without as3x or safe receivers .just basic spectrum like ar620 work perfect for this orx plane !
Thank very much!!!!!
hi there,can you plz do a vid on how you connected the rx to the gyro,i have never used a gyro before.thx mark from Doncaster.
Hello, what model of orx stabilizer? Because the beguiner mode is not bad
Is the plug on the plane for the 3S an XT60?
i flew two batterys on beginner mode with my skyraider next time i will try expert mode .1 question : in expertmode when i relaise the sticks will it stabilise the skyraider automaticaly to horzontal or will expert mode only counter turbulances ?
What flight time you got? (which battery?)
Awesome video, and written explanation of the set up. Do you have to use a a spectrum receiver with that gyro? Or can you use any brand receiver and tx?
Any RX will suffice.
can i make beginner mode more agressive ?double the rates ?
Looks like a great little plane for the money. Although it survived this typical small tail-dragger landing, I hope HK stock plenty of spare props. 😁
If it can survive take off and landing at this bumpy strip it can survive anything. It's not our preferred site for this type of model but it was only place I could get a cameraman to shoot it flying. Yes...that prop won't survive many nose overs so spares will be essential RC! I just checked and they do spare blades and hub. Cheers Dom (Essential RC)
@@EssentialRC HK does have spare props and I ordered several. Came from China. As a side note the plane flies just as well if not better just using 2 props or a prop saver and 2 blade plastic prop. At least if you break one or 2 blades you aren't out of business.
When’s the next SR-71 build update Dom ? 😀
Just bought one! What-s the settings have you used on your TX like DX9?
3 position rates at 33%, 66%, 100% and 30% exponential. Same on all my models. Cheers Dom (Essential RC)
great vid, how does it do the flight stabilization if you have to supply a receiver, isn't that tech in the receiver?
No. It's a separate module that is included with the model. It is already in the model and connected to the servos. You plug the wires from the stabilisation module into your receiver. Cheers Dom (Essential RC)
Would this plane work with the futba 6l sport Transmitter it has a one switched channel
Yes. Should do. Look toward end of the manual here for info on channels needed. cdn-global-hk.hobbyking.com/media/file/a/1/a1_skyraider_manual_v1_edited.pdf
it would be nice if this skyraider hàd intermediate mode little more angle like 55 % turn left and right .
You tried the dji system on this one yet? I think it could carry it ok, no?
No. Too heavy.
will this bind to spektrum receivers out of the box?
You can put a Spektrum receiver in it and it will work. That's what I used.
What a lovely plane! Nice flying!
Which flight time do you get Out of a 3s 850mah battery If you fly slow?
6-8 minutes-ish
@@EssentialRC perfect, thanks a lot. Are there any warning when battery gets low? (Iflight planes let the Motor pulsing for example)
Essential RC what controller did you use?
I fpv fly plane,,, do you think it could carry a micro fpv cam? Looks awesome
One of those micro combined cam/VTX FPV units? Yes it could carry the weight but you could need to cut up the cockpit to fit it.
How do you switch it to beginner and expert mode?
You plug the ORX lead into a separate channel in your receiver. You could use Gear channel or AUX1, etc. Map that channel to a 2 position switch on your transmitter.
Just ordered one. I'm very excided! Can anyone tell me how to connect it to a Frsky sbus receiver? Nothing in the manual....:(
They same as connecting to any other receiver Walter. I use Spectrum and just plugged each of the 3 pin leads into the normal primary control surface and throttle channels with exception of the stabiliser lead which you need to put into an auxiliary channel which should be configured to a 2 position switch. Cheers Dom (Essential RC)
@@EssentialRCThanks for your answer Dom, but I meant a Frsky XM+ Micro D16 SBUS receiver. It has only three pins.
Hmmm. Not sure then. 1 signal pin per channel?
@@WalterWeidner I'm not familiar with Frsky stuff Walter. I'll pass this onto some of the others in my team to see if they can help.
@@EssentialRC I have connected my xm+ to the aux servo connector. It works perfect. Your mode switch is on ch5.
Kool
just picked mine up for 87 dollars at h-king
where can i get it from
bit.ly/hkingA1Skyraider
Where can I get spare props?
Well eh maybe HobbyKing.com
@@EssentialRC they are backordered. I just ordered the plane. I will just fly it with 2 blades until I get spares.
@@EssentialRC I found them at General Hobby. They have the pnp TOP Race version wich is identical to the HK version minus the gyro. Hobbyking is always back ordered on spare parts.
AVAILABLE HERE: bit.ly/hkingA1Skyraider