How to level your bed - Ender 3 V2 [ Beginner Friendly ]
Vložit
- čas přidán 2. 02. 2021
- How to level your bed on your ender 3 v2 3D printer. This is a video guide on how to level the bed on your ender 3 v2 printer for people who are new to 3D printing and just learning. If you have any questions at all, please feel free to ask them in the comments below, or join our discord.
***PLEASE NOTE*** Filaments like TPU, PETG, ABS, etc WILL bound together with the TH3D ezFLEX bed sheet I showed in the video. You will want to use something like hairspray, or a glue stick on your bed surface BEFORE printing those types of filaments. Don't ruin your brand new print surface the very first time you print something like TPU, like I did. PLA does NOT require you to put anything on the build surface though.
#3dprinting #ender3v2
CHEP Bed Leveling Print:
www.thingiverse.com/thing:323...
TH3D ezFlex PEI Bed Sheet:
www.th3dstudio.com/product/ez...\
Discord Server:
/ discord
Bitcoin Wallet:
bc1q9tk26lwzg3qnmh85ez4kxqtams6f6cu433mnxu
--------3D Printer Upgrades & Mods--------
Ender 3 V2:
amzn.to/3jFduQ4
Bltouch Kit:
amzn.to/375q1HC
EZABL From TH3D:
www.th3dstudio.com/product/ez...
Raspberry Pi 4 2GB:
amzn.to/2Nn4DX6
Raspberry Pi 4 Full Starter Kit:
amzn.to/2OlAQyC
USB Webcam used for Raspberry Pi:
amzn.to/3jMuZ0S
Creality Direct Drive Upgrade Kit:
amzn.to/3d5aYl6
Upgraded Bed Springs:
amzn.to/3aVGyPr
Extra .4 Nozzle Kit:
amzn.to/3b0Zex8
Digital Calipers:
amzn.to/3qhfTmw
Monitor cable for Raspberry Pi:
amzn.to/3jI2i5b
40mm LED Fans for Raspberry Pi:
amzn.to/2Z6bxD1
TH3D Upgraded Extruder:
www.th3dstudio.com/product/ez...
TH3D PTFE Tough Tube:
www.th3dstudio.com/product/ez...
Desiccant Packs: (keep your filament dry)
amzn.to/3d56CKA
Airtight Storage Container for filament:
amzn.to/3abKn3I
--------3D Printing Filaments--------
Black Sainsmart TPU:
amzn.to/2N0C9me
Green Sainsmart TPU:
amzn.to/3d5UQQq
White Sainsmart TPU:
amzn.to/3pcCQGc
Eryone Galaxy Sparkly Glitter PLA:
amzn.to/2YbkgU4
GIZMO Dorks PLA Pack:
amzn.to/2URZ073
Black SUNLU PLA:
amzn.to/39apN3o
White SUNLU PLA:
amzn.to/3phaafY
Some of the links listed above are affiliate links to Amazon & TH3D. This means that if you choose to purchase any of the products after clicking on the links, I will receive a small commission, at no extra cost to you. This is a small way to help support the channel, and if you choose to purchase anything it is greatly appreciated!
I use the same leveling method, works like a champ. With the enhanced springs, haven't had to re-level the bed in a long time, though I still check every 3-5 prints because I'm neurotic. Side note: My v2's glass plate was bowl shaped (I've read this is not uncommon). Any print crossing the center would not adhere, I was going nuts. I switched to the EZFLEX bed and now 20+ prints in, no issues and the prints pop off with ease. 100% recommend.
Yup. Ender 3 v2. This leveled my bed to perfection. Thanks...
thank you for making this video!
Good content. Thank you!
Get on with it to many diversions !!
Hey I’m having trouble setting up my ender 3 V2. My glass build plate is bowl shaped right now and I wanted to buy the build plate you have but the link takes me to a bed leveling system. Would really appreciate a link to the bed plate you have so I can get consistent prints. Does it go on top of the original glass plate or do you get rid of the glass plate altogether? I’m assuming that you had to cut the Z limit switch holder to get your nozzle closer to the bed since you don’t use the original thicker plate with the new plate. Thank you for your vids! They have saved me so much time!
thanks for the video, question what easy flex sheet did you use. thanks in advance
Hey mate for Performing ur Printer u can use dual Z achsis u checkt that ?
I've leveled my bed using this method and using the new springs but the filament isn't sticking to the glass plate and the filament just clumps at the nozzle. Any suggestions?
I used the homing thing and it started violently vibrating on the left side. It looks like the left side is higher than the right but I'm not sure how to fix that since I'm messed with the things at the bottom of the plate
i just got my ender 3 V2 and put it all together last night. I messed with it for a few ours and i cannot get the filament to stick to the bed. I am using the filament they supplied with the unit so i am not wasting filament that i purchased. I have tried to level the bed multiple times but does not help at all, i am thinking the glass might be warped, i will confirm this tonight after work. I also tried the hairspray trick and it made no difference. I will try a glue stick tonight. Should i ditch the glass bed altogether and go with the EXflex? Also should i try clips on each corner and ditch the 2 metal clips supplied?
what size sheet did you get for your ender 3 v2?
Mine keeps hitting the motor in the back when it’s leveled
I have new ender 3 v2. I leveled the bed so many times that is perfect. However, filament keeps refusing to stick to the bed. I tried everything, nothing is working. Do you think it is a bad filament? Or am I missing something.
My centre is a lot looser than the corners, please help! I have the creality magnetic bed and think I might regret swapping away from glass
Good video on bed leveling - I'll have to check out that print surface you used.
What weight of paper do you use? Every paper comes in different weights and thicknesses. That's why "paper" is very subjective
Lord I'm stress out of this =.=
I finally just did a spring upgrade on my Ender 3 V2 and now I can’t get the damn bed level for the life of me! I tighten the springs all the way tight in pairs, give em about 4 turns to raise the bed and home it. Then my right side always rips the paper. So I turn down that side and run out of turns. I do it when hot. What am I doing wrong 🤬, please help?
For some reason I can only level one corner the other corner is too high even when turned counter clockwise a lot