How to paint a Plastic Object with Montana Colors

The MTN Pro Plastic Primer is a clear primer used as an anchoring layer necessary for the subsequent painting of PP plastic surfaces (EPDM).
Formulated with a base of special additives that provide the dried paint with extraordinary adhesion to PP (polypropylene) modified with EPDM and other plastics (consult our technical department in case of doubt).
More info: www.montanacolors.com/en/prod...
MTN PRO Color Paint is a RAL color spray paint formulated with high quality acrylic resins and pigments, as well as stabilizing additives that offer a flawless finish.
Due to the characteristics of the product, its use is effective both indoors and outdoors and on multiple surfaces: wood, metal, stainless steel, glass, plaster, ceramic, stone, hard plastic, etc. Brilliant shine.
More info: www.montanacolors.com/en/prod...
0:10 For greater safety we recommend the use of gloves and a mask.
0:30 Degrease and clean the surface before painting. In this way you will get the paint to have a better grip and durability. We recommend the use of MTN PRO Ethyl Alcohol 70%ito achieve the best results.
0:43 Before starting the painting process, shake the can well for one minute.
0:45 Test the distance and flow of paint beforehand.
0:54 Paint holding the can in an upright position where possible. Apply three or four thin layers instead of one thick coat.
1:11 Once finished, clean the nozzle by holding the can upside down and pressing the nozzleuntil only gas comes out. If the nozzle is clogged, simply replace it with a new one.
1:17 Let the paint dry for 20 minutes.
1:30 Before starting the painting process, shake the can well for one minute.
1:34 Test the distance and flow of paint beforehand.
1:42 Paint holding the can in an upright position where possible. Apply three or four thin layers instead of one thick coat.
2:27 Once finished, clean the nozzle by holding the can upside down and pressing the nozzleuntil only gas comes out. If the nozzle is clogged, simply replace it with a new one.
1:17 Let the paint dry for 2 hours.
Recycle - Repair - Repaint - Reuse!
Web: www.montanacolors.com/product...
Instagram: / montana_colors
Blog: www.mtn-world.com/es/
Facebook: / montanacolors
Montana Colors DIY is the CZcams channel of Montana Colors dedicated to #handicrafts #decoration #creativity #tutorial #finearts #paint #diy #mtncolors #montanacolors #sprayplanet # mtn2021 #mtnpro #spray #marker #dabbers
www.montanacolors.com

[@laurachambers3772]

this was calming and helpful thank you

[@sergenity]

Can i paint plastic inside car with this method? Or i need hi temperature spray and lack?

[@said8756]

Can I use HB Body 950 spay over this primer?

[@austinanderson4223]

Would this work on any kind of plastic?

[@vasekcz]

Why ethyl?