BMW Engine Mount Install - E30 - Condor Speed Shop

Stop all unwanted engine movement with Condor Speed Shop Engine Mounts. Under hard braking and cornering the stock mounts allow the engine to pitch forward and to the side. These solid mounts stiffen the engine and drivetrain, dramatically changing the responsiveness of your E30. Condor mounts are a direct replacement for your original OEM rubber engine mounts. All mounts are made in the USA and have a lifetime guarantee!
Condor M42 Engine Mounts:
www.condorspeedshop.com/colle...
Condor M20 Engine Mounts:
www.condorspeedshop.com/colle...
Condor 24v Swap Mounts:
www.condorspeedshop.com/colle...
Fitment:
1983 - 1991 E30 BMW
Contact us:
Email: [e-mail]
Website: condorspeedshop.com
IG: @condorspeedshop
FB: / condorspeeds. .
Twitter: / condorspeedshop
Music by Joakim Karud / joakimkarud

[@YiataMan]

Also I have an m50 in my e30 looking to get the risers that you guys sell is it a direct bolt in if i buy these bushings and the risers

[@CondorSpeedShop]

The risers don't work with 24V swap mounts due to the angle of the mounts.

[@CMAzmi]

Hello there.
Can this engine mounts fit to m40?
Thank you

[@tobydmv]

It appears you removed a complete tie rod from the steering rack, yet no mention of it in the instructions....?

[@CondorSpeedShop]

Toby, There is no need to remove the tierod.

[@ave3.727]

does it matter if the washer are nut or on the bottom of mount?

[@CondorSpeedShop]

Yes, you need to install the washers on the top and bottom of the mounts.

[@YiataMan]

Does this raise the motor at all looks thicker then the stock bushing

[@CondorSpeedShop]

Not at all. They are the same height as OEM mounts.

[@e30valdo]

@@CondorSpeedShop it says on your website that they are 20mm taller than stock OEM mounts. "They are 20mm taller than OEM mounts to add necessary clearance to ensure the oil pan sits above the stock subframe. " So do they raise the engine by 20mm?

[@Car_con]

@@e30valdo Yes they add 20mm of height.