Lidl Parkside 4 in 1 Petrol Multitool PBK 4 B3 Review Part 2, putting it together
Vložit
- čas přidán 5. 06. 2024
- Lidl Parkside 4 in 1 Petrol Multitool PBK 4 B3 Review Part 2, putting it together.
This is part 2 of 3 covering putting bits on, putting the brush cutter or strimmer head on, chain etc and lubrication points.
Part 1 is here:
• Lidl Parkside 4 in 1 P...
Part 3 (trying it out) is here
• Lidl Parkside 4 in 1 P...
For strimmer head problems see here:
• Lidl Parkside 4 in 1 P...
0:00 Introduction
0:35 The harness
1:35 Fitting the handle
3:25 Fitting the extension or an accessory to the engine
5:48 Notes on the hedge Trimmer attachment and grease point
7:07 Strimmer/brush cutter, fitting guard and cutting heads
14:42 Changing the strimmer line
15:21 Fitting the chain
24:15 Removing spark plug connector
28:00 Choke and cleaning the air filter
30:43 Conclusion - Jak na to + styl
I have one of these, found your videos today, much better for me to watch your videos than read that manual, I just wish I had 4 arms when putting it together !!! Thank you for the easy to follow videos.
You are very welcome. I am pleased they helped.
Many thanks for watching, please like, share and if you like the channel, subscribe!
Hey Ben, thank you for making these videos. I am a young guy that is trying to figure this all out and this is very helpful! God bless
You are very welcome. Please like, share and if you like the channel, subscribe!
Thanks again I like the extra bits on maintenance looking forward to the next one
You are very welcome! Will be filming in a minute. Many thanks for watching!
many thanks from the Netherlands for the instruction video. We are not really technical and have no experience with these types of devices. We follow for new equipment very carefully the manual. But with this device we have been struggling for a day with the manual for the assembly of the scythe mower. We find out after your video that the manual is wrong. Fortunately with your explanation and showing how it sounds together, we have come out.
You are very welcome. I also followed the instructions in the manual, the ones in English, however it is not so much the wording at fault as the drawings are unclear.
I am pleased to have helped. Please like, share and if you like the channel, subscribe!
Thank you Sir, great video :)
Very helpful! Good video
You are welcome.
Many thanks for watching, please like, share and if you like the channel, subscribe!
Video of it runnin would be great, bought it today. Thanks for the vid.
Linked in the description is parts 1 and 3, 3 has it running. See below:
czcams.com/video/ypgMFIoy9LQ/video.html
Part 1 is the unboxing, here:
czcams.com/video/_WYYO0ppUSk/video.html
and then there's a part about strimmer head issues:
czcams.com/video/210bzMzrWcw/video.html
Many thanks for watching, please like, share and if you like the channel, subscribe!
@@BensWorkshop thanks! Didn't see that. Going to fiddle with it tonight. Here the product is sold in the Netherlands. Same kit.
Enjoy!
@@BensWorkshop Do you also have 3 years warranty? At what rate do you mix your oil to benzine? 1 liter oil to 50 liters of benzine or 1 on 40?
All Lidl tools have a 3 year warranty. The instructions say 40 to 1.
Doesn't seem to be a bad tool good demonstration. 👍
Many thanks Ali, and thanks for watching!
In Italy too Lidl as a very good products! Thanks for sharing! Cheers Fabrizio - like 7
You will get the same in Italy, just at different times. Many thanks for watching!
@@BensWorkshop Yes my friend!
Nice one Benedict.
Cheers James and thanks for watching!
Thank you
You are welcome!
Many thanks for watching! Please like, share and if you like the channel, subscribe!
Very useful... The manual isn't very clear on the assembly 😅 cheers
You are very welcome! I am pleased my video was helpful.
Many thanks for watching, please like, share and if you like the channel, subscribe!
Video is extremely informative, especially details likegrease point.
You are very welcome. Many thanks for watching, please like, share and if you like the channel subscribe!
Any tip on how to fix the choke lever if the spring jumped off? Bought one last week and that's the first thing that happened!
Odd. Short answer is not because it has not happened to mine. However you can just get it changed for a new one at Lidl.
Many thanks for watching, please like, share and if you like the channel, subscribe!
Hi, is the internal splin that spins inside square? Im looking for a replacement power head for a ryobi expand it range.
The external spline goes in to a socket with an internal spline. If your shaft has a square socket it is not going to work.
Many thanks for watching, please like, share and if you like the channel, subscribe!
eyup Ben
I must have let this video somehow slip through, Ben
Any way nicely put together
atb
Kev
No worries, they came thick and fast. Many thanks for watching!
where can i get parts for 4 in 1 multitool , i need a primer bulb for the motor
The manual should have a phone number for Lidl service in there, though if you can measure it you could also probably get a suitable primer bulb from Amazon.
Many thanks for watching! Please like, share and if you like the channel, subscribe!
Followed your instructions for brush cutter and seems to work. When I followed the instruction booklet and tighten the nut it jams the blade so it won't turn. Thanks
Which nut and which blade?
Also, you are welcome, many thanks for watching, please like, share and if you like the channel, subscribe!
@@BensWorkshop The brush cutter blade, in the instruction booklet para 9.2.2
Nut 52 in booklet
Many thanks, I will double check when I get home. I thought I was doing it according to the instructions! :)
I read those instructions. They are what I followed, but are not desperately clear.
I could see how you could put things on incorrectly from there.
Also I don't think the line drawings are clear. The washer that always stays on (with the cut out to allow you to jam the mandrel) looks almost the same as the flange washer that goes on after the blade in the drawing.
I think actual pictures would have been better, though an instructional video better still, though, of course, I made one.
I have thought about getting one
And I went and got on on Thursday morning! Looks good so far. You will see how it gets on shortly.
Many thanks for watching!
@@BensWorkshop dad picked one up today
@@raymondstoner5555 Well, he'll have fun with that.
@@BensWorkshop more like I will lol 😂
@@raymondstoner5555 I wonder if you can use two extension poles together to make a really long pole saw....
good job
Many thanks, and thanks for watching!
Any ideas where to get spare parts for it? Cheers
There is a Lidl service number in the manual. What are you after? Similar strimmer heads are available on Amazon.
Also, many thanks for watching, please like, share and if you like the channel, subscribe!
@BensWorkshop I'm looking for a strimmer head replacement as mine unfortunately broke. Thank you for your help!
I also have a video on the strimmer head. However this one looks like a reasonable replacement. M10 x 1.25 left hand thread.
www.amazon.co.uk/dp/B089NQBMNN/?coliid=IEYAQAEUZ3PIY&colid=5X5HSLDJMO93&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it
@@BensWorkshop thank you!
You are welcome. Let me know how you get on, and how you find that strimmer head.