Video nenĂ dostupnĂŠ.
OmlouvĂĄme se.
Instrument Cluster/Speedometer Gauges Removal on Ford F-150 2009-2014
VloĹžit
- Äas pĹidĂĄn 14. 04. 2021
- If you want to replace non-working instrument cluster/odometer, watch this straightforward video.
đ°Save money on other Ford F150 maintenance and repairs :
How To Check The Transmission Fluid On Ford F-150 With Aftermarket Dipstick
⢠How To Check The Trans...
Ford F-150 6.5 ft. Bed Removal on SuperCrew Cab - Easy Step-By-Step
⢠Ford F-150 6.5 ft. Bed...
Ford F 150 Spare Tire, Jack, and Tools Location& Removal Drop Spare Tire on Ford F-150
⢠Ford F -150 Spare Tire...
Any Ford F-150 Tailgate Removal - No Tools Needed
⢠Any Ford F-150 Tailgat...
Ford F 150 Fuel Gauge Problem: How To Know If It Is The Cluster Or Something Else
⢠Ford F 150 Fuel Gauge ...
The most effective way to find a leak in Ford F-150
⢠Ford F-150 cab water leak
How to relearn and reset TPMS (tire pressure monitor sensor) light
⢠How to relearn and res...
Ford F-150 Transmission Problem? Might be an Easy Dry Shaft Fix
⢠Ford F-150 Transmissio...
How to find your security keyless entry keypad code on Ford F150
⢠How to find your secur...
How to Remove Ford F150 Fronts Seats
⢠How To Remove Ford F15...
How to unlatch rear seat back on 2009-20014 Ford F-150
⢠How to fold down rear ...
How Remove Ford F150 Inside Door Panel
⢠Ford F150 Interior Doo...
The Removal and Installation of Door Lock Actuator, common failure on F150
⢠Replacement of door lo...
How to Replace Blinker Bulb on Ford F-150 2009-2014
⢠How to Change Turn Sig...
Review, installation, and testing of GTR Lighting ULTRA 2 LED: H13 Headlights for 2009-2014 Ford F150
⢠Review, installation, ...
Review and installation of LASFIT Pro series Custom Design LED headlights for 2009-2014 Ford F150
⢠Review and installatio...
Ford F150 Gas Cap wonât stay closed? Permanent Fix!
⢠Ford F150 Gas Cap wonâ...
đ°Save money on other vehicle maintenance and repairs :
Top 3 Reasons Why Your Car Wonât Start
⢠Top 3 Reasons Why Your...
Pittsburg Harbor Freight Engine Support Bar 1000lb. Capacity - Review& Install
⢠Pittsburg Harbor Freig...
How To Remove A VERY Stripped Lug Nut - When All Tools Failed - Guaranteed
⢠How To Remove A VERY S...
Cheap Way To Check For Bent Valves Without Removing Cylinder Head
⢠Cheap Way To Check For...
Brake Burning Smell? - Frozen Brake Caliper Replacement on Any Car
⢠Brake Burning Smell? -...
Brakes Dragging? And Not a Frozen Caliper?
⢠Brakes Still Dragging...
Save money and learn how to bleed brakes by yourself on any car
⢠Save Money And Learn H...
How to properly gap spark plugs
⢠Car Misfiring? Running...
Proper way to install valve stem seals
⢠Proper Way to Install ...
Hot Tip: Broken Stud Removal
⢠Hot Tip: Use a Torch f...
Remove a Broken Stud Below the Surface
⢠Remove a Broken Stud B...
Oil Bearing Clearance measuring - simple to understand video
⢠Oil Bearing Clearance ...
Symptoms Of A Seized / Locked Engine - How To Tell Itâs Not A Bad Starter
⢠Symptoms Of A Seized /...
How to properly gap and install piston rings
⢠Piston Rings Replaceme...
How to check cylinder head or block deck for warpage
⢠Cylinder Head Warpage ...
Why is it important to replace the timing belt at the manufactureâs intervals
⢠Check and Change Your ...
Fast & Easy way to lap âgrindâ intake and exhaust valves
⢠Seating Intake & Exhau...
Replace Front Exhaust Flex Pipe on most 4 or 6 cylinder cars - Cheap Way
⢠Replace Front Exhaust ...
Better Throttle Response in Minutes
⢠Better Throttle Respon...
âď¸QUESTIONS
If you have any questions or I missed something, comment below and Iâll answer and try to help you out
If you find this video helpful, like it and subscribe to my new channel. Iâll have tons of videos on all kinds of car and truck repairs in the
future.
â ď¸Disclaimer:
The videos on Motorcarnut channel are posted with informational purpose only.
Information posted in this video does not guarantee any particular result. Use this information provided in the video with caution and at your own risk. It is the responsibility of the viewer to take this risk.
Motorcarnut is not responsible or liable for property damage, any loss damage, or injury related to or resulted from information posted in this video.
You donât have to take the bottom three screws off. Just the two on top and the 4 attached to the cluster itself.
The top piece of the column bezel has to come off so yes the 3 screws on the bottom half of the bezel have to be removed but the bottom bezel itself doesnât.
@@Motorcarnut I work on clusters every day, top piece of the bezel actually isnât attached by screws. It just pops up on itâs own. Really the only ones that require the bottom screws are most older Nissans. But do more then you need to if it suits you,
Sir, this is the way itâs done on this particular vehicle unless you do it sloppy and rip the rubber trim piece. What do you think those 3 screws screw go into?? The top bezel! Which needs to be removed as stated. Also, if you do them every day why are you watching my video?
@@Motorcarnut the three screws are not attached. Trust me. We do hundreds a day. Just pop the top bezel up. Remove the two 7mm screws on the top. And it just all pops out bezel and cluster cover. Donât got to rip anything it comes out in one piece. You can do it how you like but youâre doing extra. I work for a company that pulls 100âs a day ranging from early 2000âs to 21âs to convert from kmph to mph. You 100% are doing extra work on those 10-14 f150âs.
I do thousands per day. You donât need to loosen any screws anywhere. Just grab on to the leather piece and rip it out.
Thank you for the info, I need to fix a spent speedometer needle, it's reading 20mph at park
yep, sounds like its bad
How to reprogram the mileage on the cluster?
Reprogramming mileage is done at dealership,itâs illegal to do it otherwise
Is it possible to take out the lcd screen from the cluster once itâs removed, cause my f150 2011 XLT itâs lcd screen doesnât turn on and thatâs all I need to replace
Yes
I have a question and really hope you can answer this for me so i have a 2010 f150 and i dont have the lcd screen just the numbers the 2011 version comes with the lcd screen would i be able to buy the lcd versions for 2012 and put it on my 2010
Yes, it should work
My speedometer hand fell off. Is there a way to open that glass on that cluster to put it back on
Yes, removal is required first.
On mine, the Fuel Gauge, Oil Pressure, and Temp needles are not lighting up. Makes it very difficult to monitor my instruments at night. Is there a good way to check the LEDs / replace the LEDs that light the needles? I want to try and avoid replacing the whole cluster ($700 part)
They are not replaceable
@@Motorcarnut So the "fix" would require a new instrument cluster? How can I swap the odometer data so everything else remains the same? When I contacted my Ford dealer, they said they would have to order the part from Ford with a specific Odometer input before they even received it.
You could look the the same year make and model used cluster online like eBay and have the mileage reprogrammed also online legally.
@@Motorcarnut Sorry for the million questions. Who does the reprogramming? My dealer said they couldn't reprogram and it would have to be done prior to shipping the part. Wonder how I get it reprogrammed if I buy off ebay.
That Iâm not sure, thatâs what others told me before, but you have to be careful when it comes to anything involving the odometer replacement because records have to be kept and done by law. Best to go with dealer recommendation.
What if you want to remove the glass to dust off inside?
Itâs plastic not glass. You can
@@Motorcarnut how? Does all of it need to come out? I have a dead bug inside mine đ itâs irritating
@Osobear14 yes you have to take the cluster out then remove the plastic lens
Is there a way to take the cover off that protects the cluster? I am wanting to clean mine out because there is dirt and stuff in there.
Yes, once the cluster is removed the plastic Lens can be removed from itâs clips all around the perimeter.
I want put that speedometer in a Ford 150 xlt 2010 ?
2009 - 2010 clusters are different than 2011 to 2014
What was wrong with your original cluster that you changed it?
LCD display was out
Do you have to program the new cluster when you swap it? Because I just swapped my cluster and everything else turns on besides my truck wonât start so I had to put the old one back on
Must depend on model year. Had a 2011 f150 and had no problem with that one.
Dang okay. Mines a 2010 f150 lariat I even disconnected the battery to see if itâll reset didnât work
Thatâs what I was about to say. 2011 up maybe different. I had a cluster that didnât work but the truck did start. I cleaned any codes and then it worked fine.
We just swapped out the bad cluster with a reman one from Ford and now won't start. Put the old one back in and still wont start. Both clusters are now showing "Anti theft" light. Tried resetting the anti theft but wont reset. Not sure what to do. Tow to dealer?
Should start, I mean I have vehicles start with no cluster installed. What codes are coming up, what year?? Try putting in the old cluster and disconnect the battery first for about an hour after clearing and codes, make sure the ring around the key is not disconnected and try a different known good key and see if it starts. It should.
The lights are soldered to the board on this gen F150 so it has to be sent off to have that done. Several are dead in my cluster so I came to this video looking for the way to remove the cluster so I can ship it off to have the lights all replaced.
Hope it helped
Where did you send it to? My fuel, pressure, and temp instruments have burnt out needle light. All gages are working properly, but the lights on those 4 instruments being out makes it very difficult to monitor at night. I'd like to repair rather than replace the whole cluster ($700).
I have a dead bug in mine, it is driving me crazy
It's best to have it replaced by dealer if it can't be fixed and you need a new one.
Would be much more helpful to see the actual process of removing the screws and pieces instead of talking about it after youâve done it.
Some videos I do like that when it's simple. If you have any questions let me know.