Installing Q50 rear SEQUENTIAL signals | awesome addition!
Vložit
- čas přidán 7. 09. 2020
- Adding a little "flash" to the Q50 with these sequential turn signals to replace the rear reflectors.
There have been several negative comments in regard to their fitment, but I wanted to see if I could address that issue. Watch this vid and see if I made it work!
Some Links provided are affiliate links and purchasing through them may result in this channel earning a small commission, at no additional cost to you. These links may include the Amazon Affiliate and eBay Partner Network.
Signals: amzn.to/3bBqJ0n
(There are slightly cheaper options, but the fitment reviews are far worse)
My other favorite items: www.amazon.com/shop/speedcult... - Auta a dopravní prostředky
You are the best, you make every q50 owners struggles go away. I was so frustrated but now i know how to fit them in tighter thanks to you, you are the goat!
Glad to hear the vid was helpful!!
I’ve had these sitting in my room for a year. Finally motivated to do it. Out of the videos i’ve seen this looks the easiest, thanks.
Quite simple. Wish there was a way to not have to cut the wires, but it’s not difficult!
I'm 17 and because of some really good luck I was able to get one of my dream cars, a 2008 g37 coupe. Your channel is damn good, and it's gonna be really helpful in modding my new favorite thing 👍👍
Glad you’re following along!!
Thanks man, just installed mine and with your video it was Easy Peasy, good call on shaving down the tabs too!
Thank you! thank you for all your videos! project for my 14 Q are all lined up.. just need time and break from work. Again awesome and very informative content! 👍🏾
Thanks for watching! Good luck on your projects!
Nice video, definitely the next mod I want to do. This would look great with my Sirius LED turn signals. They have built in load resistor so you don’t need to splice one in.
Man thank you for the videos, I have so many projects for my q50 because of you. I have 2014 3.7 vq
Lol glad I can help!! Fun car to work on!
Awesome video. I love this reflector. I was hoping if you would know if this would fit on my maxima 2019. Thank you for your help
Love the vids man, keep it up! There is a way to do this without splicing the wires, but it involved taking the taillights out to pass the cable through. Wasn't too bad tbh, and saved me from cutting the gromet.
You’d still have to get the wires in the back side of the bumper and they are connected to the signals themselves-I’m not sure how you can get around it.
@@SpeedCultureStudios you're right. From what I recall, I did this like two years ago, I used the kit shown in this video, czcams.com/video/xb4uCn4OImI/video.html
With the plugs not being attached out of the box, it was possible to not damage the gromet.
Love it! Thanks for the DIY once again!
Thanks for watching!
Thanks a million bro. Had these sitting in living room for a while. Finally got around to getting these on.
Watched your video and was good to go after that!
Awesome work with all that you do! All the best to your family & we'll be watching all of your other videos!!! lol
Glad it worked out man!
I’ve been waiting for this video
Awesome!
Fire!!!!! It looks very nice!!
Thanks!!
Nice upgrade. Looks good! I need!
Thank you! Relatively cheap and an easy install so I have no complaints!
@@SpeedCultureStudios seems you have all the sequentials except the front turn signals, do they make them?
I have them, and I love them. I have a spare set that is tinted without the 3 flashes before soild red braking light.
Where did you get them
@@reddellhome I got mine from Ebay. Kinda have to read the description to make sure you get the right one. To be honest I love the 3 flashes before the soild light. Makes me feel the driver behind me is a bot more aware.
Nice job man and it looks great! Funny as hell watching you one-hand things knowing how frustrating it can be. 😂😂 Also, I love the collection of crimped wire connectors you had on the ground. #tinywirestruggles
Lol I should have known to get some smaller connectors after doing the mirror lights but I didn’t even think about it. Then once I started I wasn’t stopping to get more. I got most of those red ones crimped on but one kept falling off so I said screw it and ripped all of them off haha
Speed Culture Studios inline splice thingys work great just used them for my emblem install and super cheap at oreillys autozone ect
I did this & now my side mirror and back turning lights don't stay lit when I unlock my car? any suggestions?
Looks classy as hell lol. I've been trying to look for a Sequntial driving lights for my 2008 g37s coupe but no luck 🤦🏽♂️ have you been thinking about a wrap for your Q? Man! It would make the car pop! Just my opinion 🤙🏽 keep the videos coming.
I don't know how I would wrap it, but it'd be cool. I can think of a much better way to spend $2000-$3000 though!
Thanks bro now I've spent 1k in the past week because of your videos lol
Lol that’s awesome! Money well spent I’m sure!
@@SpeedCultureStudios hope so! Hey how do you feel about those drop in filters you have. Do you feel they are any better than regular paper drop in? I swear I saw a power reduction when I added the K&N drop ins. Maybe I’m losing it but I noticed a difference and not in a good way.
I'm putting these in this weekend and also picked up the sequential mirror and front turn signals. Could you tell me what wires from the light goes the wires on the harness with the car? Mine didn't come with the harness connectors. I did though buy the mirror and front turn signals from JR Light.
I don’t know sorry. Might just have to check each of them with a test light
you should get led turn signal bulbs for the rear.! its will look dope! got them from lasfit, i got mine from there before i let the vehicle go.
I’ll look into it
I’m trying to do this install right now but I have the tail as turn harness from diode dynamics what do you recommend in connect the wires to?
Check to see how it connects and which wire from the DD harness meets with the blinker wire in the cars harness.
Sweet!
Really like them!
How do these work with the diode dynamics tail as turn module?
I guess they work just fine. They are often suggested together on amazon.
how do you recommend removing the side mirrors caps? my carbon m style came in yesterday
Watch my m-style mirror install video!
Where can I get those white clips to connect the wire of the taillights?
Oreillys
Silly question but if you pull the plugs look inside the connectors are there any tabs that can be pried a little to remove the wires instead of cutting and splicing them? If so maybe taking a quick pic of the connector to remember where they went inside the plug and just removing them that way to fit them through the bumper holes may be the way to go.
You could probably do that-just risk poor connection when putting the wires back in. Putting pins on the pigtail would have been helpful to just pin each wire into location. I will be cleaning mine up either just soldering then permanently or making quick connects
@@SpeedCultureStudios I didnt think about that. Those aftermarket connectors aren't made like the factory ones.
I got a 2018 sport and it doesn’t have lights on the back bumper can I still have this installed?
None of them do-just reflectors. Just make sure they fit. Then they wire to your taillights
Led taillight turn signal please
I need to sound deaden also, been putting it off!
Cheap and easy and makes a nice difference!
Where you get that nismo thing on the side of your seat ?
Amazon. Nismo gap seat gap filler
Do they only work as a turnlight or are they permanently on when you turn on the driving light?
It’s on as a taillight
How do you like the lights so far? I want to get them but the thing that drives me nuts about them is the brake light flashes 5 times on them. I was going to disconnect the blue wire I think it is so tat doesn't happen. That is if I do get them. That was the first mod I wanted to do too until I saw the flashing.
Why do you care about the brake light flashing. It’s a nice safety feature I’d nothing else. Besides that, YOU never have to see it.
@@SpeedCultureStudios Because I know it is there and I hate the look of it. LOL :)
You ever figured this out? I hate it too
Could u not drill a hole behind there for the plugs to fit thru it shouldn't leak anymore than the other holes thays already there?
There really isn’t a good place to drill that large of a hole. It all acts as support for the light itself so removing any bumper material would reduce integrity. You can certainly try it, but I wanted to be sure the light fit tight
🔥🔥🔥🔥🔥🔥
Hey speed culture love the video you made on this because im planning to get them for my 2015 Q50 Question is what your opinion on it and is it worth it ? I need to see before I purchase them thanks you
Yeah man it’s a cool little feature. Just get some better wire connectors than I used to make cleaner connections.
@@SpeedCultureStudios o ok thanks you and one more thing I noticed Amazon and eBay has it which site would you recommend I know this weird question lol
Does anyone know if this works on the hybrid model?
I just put them in my q50 hybrid
Are your tail lights moded??? They look different then stock.
They are tinted yes. Check out the previous video. I explain the process.
What did you do to your tail lights bro😭😭 not the bottom sequential the top is so fire😍
Haha thanks. They are just tinted, that’s it.
Could you have pulled the wires out with a small screw driver at the connector? Some are solid and others you can reach the small tabs on the wire ends. and then once pulled thru you can just push them back into location and they lock in place again.
I didn’t even try that.
I did mine by depining the connector it was fairly easy with out extra tools
I should have!
Just received them and I’m struggling with the wire cutting can you explain how you did it?
@@eazytube2706 ill post a video soon. My other comment got flagged
@@inifintileoa3006 alright bet I’ll be waiting
@@eazytube2706 just need a wire cutter and stripper
Hey when I turn my car on the sequentials don’t work, but works when the car is off and in place. any reason why?
That seems very strange.
Same
Great vid! Used this to install on my Q70S. It was a blind install all done by feel! Only problem, they don't work with the Always On mod. They only work when headlights are off. Any work arounds?
They don’t work with the always on module or with the taillights as turns mod?
@@SpeedCultureStudios they don't work with headlights on. That work fine with only the DRLs. I'm not sure why yet. Need to recheck the wiring. I don't have the trail lights as turn mod.
@@airwreckbee313 Strange they don't work with the head lights on. Definitely has to be wiring. Keep me posted.
Finally got around to checking the wiring. Definitely an issue with pin/wire set up on sequentials. With tail lights on no sequential, hazards, or brakes. Trying to research factory side to match up with new wires. Otherwise, I'll try another set from a different seller...
@@airwreckbee313 Hey just wanted to see if you figured this out? I'm planning to install for a Q70 as well. Thanks!
Will the sequential reflector work with strobe led turn signal??
I would imagine so.
They do!!! Everything works as intended as well as lock and unlock functions from key fob. I have the Hybrid Sport and have been going nuts. These videos give me most of the motivation so thank you
@@michaelcapomaccio9710 thanks for the info!
Do you need Load resistors for these?
Nope
I have a 2016 q50 and recently bought some sequential lights for the rear. But I think the fuse is out cause they’re not working. So before I installed the new sequential lights I wanted to change that fuse. So by chance, does any one know which fuse it is?
Do you think some of these mods will fit the q70 body
It's possible, but II can't say for certain. The rear sequentials may be the same.
@@SpeedCultureStudios thanks 4 taking the time
You should do a video on the front grille led emblem I just bought it and there’s not good videos
I might do that. I have never really wanted one, but for content purposes, I might do it
That would be great!!!
For emblem..... Black wire wrap around intake screw than bolt it back down which grounds the wire... than red run down to fog light open up passenger side fender liner get a inline splice splice black and white wire from fog light with red wire than reconnect fog light easy
J Rose simple!
Any 6 month update on them? Are they still working? Have you had any issues with them?
They sure are! Still looking good!
One of mines went out not to sure what happened lol
@@eliworld8745same, left one specifically
Does this drain the battery at all?
No, there is no reason it would. They run with the tail lights
Do you have the led turn bulb 💡 in the signals?
No I do not
Was trying to find the best way around that annoying hyper flash
@@drklg1 what hyper flash?
So when you change it to led the load changes so the unit flashy fast as if a bulb is out
, where do i order those from ?
Link in the description!
Where did u buy these rear sequential lights ? (eBay )
They are linked in the description
@@SpeedCultureStudios Thanks bro !!!
Subscribe …
What happens when you hit the brake? Do they flash or solid?
3 quick flashes then solid
I ordered mine and and it’s not plug and play 🤦🏽. That’s sucks
They aren't really plug and play because you have to cut the connector off anyway.
Damn I wish I saw this before I cut and splice the wires directly to the plug didn’t used the plug and play plugs it came with :/
Still works fine, you just did a little extra work
Change your license plate lights it would make a big difference
For who lol? I don't ever see them, and if they are on, it means it's dark outside so anyone rolling up behind me has their headlights on so shines bright on the back of the car anyway.
@@SpeedCultureStudios makes the car look like a base nissan instead of a luxury infiniti
inifintiLeo A Haha I hardly think a different color bulb makes that much difference. I’ve never pulled up behind a car and critiqued their license plate bulb. That’s just me though
@@SpeedCultureStudios right maybe is a thing here in LA yellow Halogen bulbs are just so old school white led makes the car look more luxurious should match the front i mean would you be ok with a car with halogen head lights or would it stand out more with white/blue HID headlights . I also said it so you have more content lol 😆
inifintiLeo A I’ll check them out. Not very expensive I’m sure
We really have to stop saying things like “and it’ll just come right off” I’ve been trying to get these reflectors off for the past half hour they will not come off I have done the clips and the screws just won’t come out
They pretty much fall out when the screws are removed. Did you get all of the screws?
These are cool but you have to replace them every year because they go out for one reason or another.
Some have said they don’t last long others have said 2 years and no problem. I got them more for content purposes than anything, so we will see how long they go!
but you dont even have led blinker bulbs
Ok
are these illegal?
No, why?
lol you sound like tobey maguire
If you think that, I don’t think you know who tobey maguiar is lol
Cut the wires if you really want to just solder and heatshrink them back together
Yep. That’s probably what I’ll end up doing.
@@SpeedCultureStudios yeah I don't own a Q but my brother does and I do all his installs and I try to make it a one and done deal everytime so I dont ever have to go back and fix it the sequential mirror lights are pretty easy to install, he might get the front bumper sequential turn signal i'll have to see how to wire that up since those are hard to find but I know where to get them
@@chrisd5758 I have a guy for the fronts.
@@SpeedCultureStudios how much? I got a guy for $125
@@chrisd5758 I’m not sure what his prices will be to the public yet.
Wire nuts😢
At least stagger the connections so it’s not a huge knot😂
So many other ways that wouldn’t be goofy af.
Didn’t have any smaller connectors- I told you it looks jerky. Staggered is a good idea. Doesn’t matter anyway, it’s all hidden and zip-tied up so no one would ever know.