Yo kev in your video I watched in your 100 mph on grass Typhon you used the combo he had in his rc car and he said that the motor and xlx2 shouldn’t go with that black motor
Lower Kv & higher voltage is always more efficient as we found out a long time ago with RC 3D Helicopters that I fly. Those cars are so gorgeous! You're a great designer and builder of these insanely fast cars. I really enjoy watching you take them to the extreme.
With huge power comes great responsibility 😂 nope, just send it straight towards the fuel station 🤣🤣 was a lovely build raz 👊 and sure it will be bettered next time. 👌
Amazing looking cars!!! That was a bad wreck. But at least that man was standing by those poles and didn't end up looking like the car did at the end. 💯💯 Cars are replaceable. People aren't. That was a close one.
Damn, I hate to see this, but great job with the 3d printing. I wrecked my limitless while out with my son. In the middle of a speed run I t-boned his Infraction. :( Can you provide more details on the 1/5 scale cars? Man those tires almost look plastic from the video. Great content as always!
Oh man, looks like you learned a couple expensive lessons! Not having much experience with different KV setups myself, I would assume higher KV+smaller pinion = better throttle control. Lower KV+larger pinion = less wear on the pinion as there's more surface area to spread out the wear, possibly better acceleration as the motor doesn't have so much RPM to spin up to, and less heat.
Man I hate that feeling, it’s the worst.. ppl crowding around, you put so much time and money and it’s totaled but it’s still new … and all we keep hearing in our heads is “I told you so” I felt it…
I love how everyone circles around the crashed RC like it’s a real life car someone crashed at a car meet 😂 very nice build though, that thing had insane speed!
YesSiRr!! Mate.. that was an EPIC crash!! Wow!! The speed that you get your RC machines to get up to are insane Mate!! I know it was a bad crash but it's good that even tho you totally wrecked... you still had a Big Smile on your face. That why I love watching your videos mate.. you NEVER FAIL to IMPRESS and ENTERTAIN!! Thankz for sharing Raz...really Appreciate your Work Mate. You take it Easy and Stay Safe out there brotha!!
As usual Raz ...Excellent Video!!! Love seeing the other cars out there playin w/ ya..Epic !! I am late as usual seeing the video cause workin but it's my treat after work..thanks !! Lmao ...That hydroplaning is the only prob w/the speed runs...but on the other hand makes for some good ass content..
Raz at least you laughed I'd literally cry bro haha why not go the full way with actual hydraulic breaks.... your one of the rc people pushing boundaries bro I love it I want you to be the best rc platform
the fastest rc I have driven thus far was just at 63mph and I crashed and it cost me about 120$ to fix everything and I was crushed I can't imagine this level. I'm more afraid controlling an rc at high speed then driving a motorcycle at 120 mph
Dam.. that mess up..sorry for your loss. Like that 3d printer 🖨....getting high tech..we bash we crash we buy we rebuild...especially you. Great video, can't wait until the continued 😀
absolutely beautiful builds. Im a avid designer and print for my builds of conversions and rigs. How big is that bed on your printer looks fairly large? $300 bucks is a steal.
Wow that Audi R8 crash was brutal, I almost waited for both some 1/5 Police cars and Ambulance to show up because that 1/5 driver must have been badly hurt but hell of a streetracer, at least he died doin what he loved. 😂
Hey Rez! one question that's been around in my head is, why is there not a big ammount of 1/10 speedrun cars? Its usually 1/8 or 1/12, what's going on?
That silk silver 👀 sweeeet. Sorry for your loss, that was one hell of a nasty wreck. Great vid as always thanks for sharing Raz. Happy Easter to you and yours and everyone else. 💯🔥🔥🔥👊👍✌
Great vid, but aaaaaaahhhhhhhhh sorry to see your car end up like that. I didn't think it was that bad a crash at first. Surprised someone hasn't popped in here to say it could have been worse, it could have been his.......
I like this video Raz! If you don't care about efficiency and want the easier power to use go high kv, if you want better efficiency and less heat go low kv right! Almost got a gopro and a labtop! Gonna be game changer! I'll feel like editing up some nice stuff like you guys. I like you Raz don't change into KTalbot or TomlyrC ugh they somehow just annoy like they turned there channels into twitter accounts somehow..
Duuuude… I was literally about to comment “oh well looks like I need a 1/5 scale RC car!” when you nailed it… Man I’m so sorry, that sucks. I still absolutely have to have one of these things though haha! With a much smaller motor considering I don’t even have and RC car yet hahaha! Just came across your channel today. Love it dude, new subscriber ✌🏻
Only thing about that first print... if you would have printed it laying down . it would be stronger.. as it standing the grain is the weakest going across instead of long way.. if you know what I mean..
Raz, love your videos ! Please excuse the nOOb questions; 1. What scale is the Porsche? is that 1/5? 2. Where can I find that body shell? 3. Are you using FG Sportsline suspension parts? Thank you !
That dual motor Losi DBXL-e 2.0!!!!! OMG! Smart btw standing beside that post just incase. Sorry to see your crash. I know it is what it is but still unfortunate. Love your content and products btw!!!! Them carbon fiber parts is lit!
Raz, my dude I've watched ur videos since you were launching cars at mach Jesus into the swap ditch. Are these mega scale cars typically not very popular here in the states? I don't remember the giant cars in earlier videos. Seems like you've gotten into them since crossing the pond.?
Where do I start 😬 - smashing video 👏👏 - 12s Fg that wheelies 👀👌🏻👏👏 Sorry to see that crash, SHE WAS A BIG ONE 😬 did you have a gps on it Raz? What was its speed as that looked more like a plane crash 😞 Glad to see another great / entertaining video buddy, CZcams is currently lacking a lot of content at the min, so looking forward to more. Hopefully the car just needs a new chassis and possible front bulk head to put it right?
Raz, the impression I got is that this car has so much power that it's going to need better tires in terms of traction...hope you fix it soon and make another pass.
Everything You Need Is Here..
www.perfectpassrc.com/
Experimental 12S RC car speed passes at the gas station, what could possibly go wrong :-D
XD
I dont think that was part of the plan but hey I bet you're perfect if you're out here talking sh!t ...
@@caperskyrc9278?
BOOM!
🤣 200mph 12S LiPo into fuel bowser! 💥💥💥
Those look so sick and it hurt my soul watching it crash but hey no one got hurt and any crash you can walk away from is a good one. Good stuff Raz
ztw vs xlx2 - which will flame 1st 😂
Yo kev in your video I watched in your 100 mph on grass Typhon you used the combo he had in his rc car and he said that the motor and xlx2 shouldn’t go with that black motor
You got some balls running that downtown and I love it
Lower Kv & higher voltage is always more efficient as we found out a long time ago with RC 3D Helicopters that I fly. Those cars are so gorgeous! You're a great designer and builder of these insanely fast cars. I really enjoy watching you take them to the extreme.
You had me at Nerd. Lol
Which ever you have the most fun with is the best!
3D printing skills is sick Raz 🔥 Awesome builds.
Great vid bro 🔥👍✌️
Wooooooohooooooo love it all crazy machines
Wow when I saw the intro part that car went flying keep up the creative work can’t wait for the next one
With huge power comes great responsibility 😂 nope, just send it straight towards the fuel station 🤣🤣 was a lovely build raz 👊 and sure it will be bettered next time. 👌
YIKES that hit was crazy! It's gonna need a little more than ducktape to run again...
Man your RC’s are awesome. What part of the world are you from? And now I want a 3D printer. Lol
That post crash clarity always hurts the most. Knowing that you had no business fully sending that car in that location.
Kinda like post hub clarity,. Better stay in control.
Amazing looking cars!!! That was a bad wreck. But at least that man was standing by those poles and didn't end up looking like the car did at the end. 💯💯 Cars are replaceable. People aren't. That was a close one.
luckily nobody is injured. the car will be fixed and drive again :-)
Almost blew up the gas station , but other than that , everything is fine 😀
just an other day of play 😉
Raz, you are a true, artist. Your builds keep getting better, and better. Thank you for sharing.
lets have a moment of silence for that rc car 😚 but it will run again
Raz they our two gorgeous builds buddy
Fricken love this channel so much, nothing but quality here boys !
Damn, I hate to see this, but great job with the 3d printing. I wrecked my limitless while out with my son. In the middle of a speed run I t-boned his Infraction. :( Can you provide more details on the 1/5 scale cars? Man those tires almost look plastic from the video. Great content as always!
Are there wings that adjust automatically to speed For these cars?
Damn bro. I just picked up a Rovan F5 electric roller to try some different combos in. 👍
🇨🇦👈🤠
I challenge Raz to a 1/16 off road rc top speed? So far you got 65mph to beat. I'm using a q901, and I don't care how much you spend 😉
Oh man, looks like you learned a couple expensive lessons!
Not having much experience with different KV setups myself, I would assume higher KV+smaller pinion = better throttle control. Lower KV+larger pinion = less wear on the pinion as there's more surface area to spread out the wear, possibly better acceleration as the motor doesn't have so much RPM to spin up to, and less heat.
Your videos have so much character then any other RC guy your jokes your style I just love watching you
Man I hate that feeling, it’s the worst.. ppl crowding around, you put so much time and money and it’s totaled but it’s still new … and all we keep hearing in our heads is “I told you so” I felt it…
I love how everyone circles around the crashed RC like it’s a real life car someone crashed at a car meet 😂 very nice build though, that thing had insane speed!
Love your channel Raz Man! Best Thang smoking!
YesSiRr!! Mate.. that was an EPIC crash!! Wow!! The speed that you get your RC machines to get up to are insane Mate!! I know it was a bad crash but it's good that even tho you totally wrecked... you still had a Big Smile on your face. That why I love watching your videos mate.. you NEVER FAIL to IMPRESS and ENTERTAIN!! Thankz for sharing Raz...really Appreciate your Work Mate. You take it Easy and Stay Safe out there brotha!!
Thanks!!
That was nasty wreak, I really feel for you man, trure artist in the RC world, great vid, looking forward for the next build, 👌👌👌👌👍👍👍👍
אין עליך רז טירוף אח שלי אוהבים אותך 😘😘😘
As usual Raz ...Excellent Video!!!
Love seeing the other cars out there playin w/ ya..Epic !!
I am late as usual seeing the video cause workin but it's my treat after work..thanks !!
Lmao ...That hydroplaning is the only prob w/the speed runs...but on the other hand makes for some good ass content..
Raz at least you laughed I'd literally cry bro haha why not go the full way with actual hydraulic breaks.... your one of the rc people pushing boundaries bro I love it I want you to be the best rc platform
Wow what a bad crash at the end 😮 I could only imagine the amount of $$$ that run cost👊🏻💪🏻😎
Just imagine how lucky that dude is that he didn't get smashed the face. Woah!
Careful with the 3d printed parts. they might melt if they're in contact with the motor.
Sorry for the crash man, she was a beauty! Also any idea what that wheel/tire combo was on the DBXLE? 5:33
Wow that hurt to watch brother 🤦 hope to see it all fixed up and running again looks like it’s a absolute ripper of a car!
Sorry about your toy car, fun while it lasted :)
Did you just get mocked in Yiddish?
We need subs🙂
Great stuff, thanks!
the fastest rc I have driven thus far was just at 63mph and I crashed and it cost me about 120$ to fix everything and I was crushed I can't imagine this level. I'm more afraid controlling an rc at high speed then driving a motorcycle at 120 mph
Dam.. that mess up..sorry for your loss. Like that 3d printer 🖨....getting high tech..we bash we crash we buy we rebuild...especially you. Great video, can't wait until the continued 😀
OMG I so want that Porsche. Beautiful builds.
What a disaster of a crash 😂
Hi Raz. Quick question. Is the Futaba 4PM ok for the speed run thing or should I go for a 7PXR? Love your vids!
This guy is constantly pushing the limits and I freaking love it! Top 3 RC TY channel for sure
raz tomley and kev talbot are all awesome
Dang Raz hope you can salvage some of your parts off the car... great content tho keep it up!
I feel your pain. My infraction got ran over by a SUV and is In need of a major overhaul.
absolutely beautiful builds. Im a avid designer and print for my builds of conversions and rigs. How big is that bed on your printer looks fairly large? $300 bucks is a steal.
Wow that Audi R8 crash was brutal, I almost waited for both some 1/5 Police cars and Ambulance to show up because that 1/5 driver must have been badly hurt but hell of a streetracer, at least he died doin what he loved. 😂
First time for me seeing a touring car in such a large scale...
Really cool !
Hey Rez! one question that's been around in my head is, why is there not a big ammount of 1/10 speedrun cars? Its usually 1/8 or 1/12, what's going on?
Omg raz that fella was so lucky and the car I can’t believe it bro aww so sorry mate
This channel is really good! Unique cars all over, interesting projects and massive POWERED builds!
That silk silver 👀 sweeeet. Sorry for your loss, that was one hell of a nasty wreck. Great vid as always thanks for sharing Raz. Happy Easter to you and yours and everyone else. 💯🔥🔥🔥👊👍✌
Raz, the king of Rc speedruns, I have huge respect for you. That 198mph was crazy
You could see the tires where not hooking up, no wonder it slipped out
I can't imagine how much 3d printing parts has done for and to the RC World being a tomiya and Traxxas guy things would be limitless
Bass ass big scale stuff . That wreck looked nasty . I like how all you guys have fly ass shoes on haha
It's like working on a full size car!
Great vid, but aaaaaaahhhhhhhhh sorry to see your car end up like that. I didn't think it was that bad a crash at first.
Surprised someone hasn't popped in here to say it could have been worse, it could have been his.......
A moment of silence please ... Thank you🙈
Now thats a "scale rc car crash". Resembles a real car total!!!
Hard to hit thumbs up on this one. My heart breaks for you buddy. That’s a big loss 😢
I like this video Raz! If you don't care about efficiency and want the easier power to use go high kv, if you want better efficiency and less heat go low kv right! Almost got a gopro and a labtop! Gonna be game changer! I'll feel like editing up some nice stuff like you guys. I like you Raz don't change into KTalbot or TomlyrC ugh they somehow just annoy like they turned there channels into twitter accounts somehow..
You definitely build some of the cleanest and by far crazy awesome rc cars. Keep up the good work, and sorry about that wreck, ouch
What a powerful machine!!! Please get it back on the road gotta see some more of it… good luck with trying to piece it back together…
Duuuude… I was literally about to comment “oh well looks like I need a 1/5 scale RC car!” when you nailed it… Man I’m so sorry, that sucks. I still absolutely have to have one of these things though haha! With a much smaller motor considering I don’t even have and RC car yet hahaha! Just came across your channel today. Love it dude, new subscriber ✌🏻
I think 3 degrees rear toe in would help traction and get the tyres nice and warm
MY GAAAWD, YA'LL GOT SOME BEAUUTEEFUL RIGS!!
🤍🤍
💣💥
💯❤️🔥
🤑🤑
💨💨
Only thing about that first print... if you would have printed it laying down . it would be stronger.. as it standing the grain is the weakest going across instead of long way.. if you know what I mean..
Raz, love your videos !
Please excuse the nOOb questions;
1. What scale is the Porsche? is that 1/5?
2. Where can I find that body shell?
3. Are you using FG Sportsline suspension parts?
Thank you !
People spend all that time and money making their rc extremely fast and it never fails that they destroy the car first try.
Ouch that was a very expensive crash
Jeeez... lucky you didn't hit the ppl at the gas station 😉 it seems you have low grip at that Audi. But it's a beuty 😀
Man it looked like you were trying to drive it at speed, guess that was trying to save it lol
That dual motor Losi DBXL-e 2.0!!!!! OMG! Smart btw standing beside that post just incase. Sorry to see your crash. I know it is what it is but still unfortunate. Love your content and products btw!!!! Them carbon fiber parts is lit!
Raz, my dude I've watched ur videos since you were launching cars at mach Jesus into the swap ditch. Are these mega scale cars typically not very popular here in the states? I don't remember the giant cars in earlier videos. Seems like you've gotten into them since crossing the pond.?
Love the bigger cars!!
Wow!!! I spent a lot better results out of you but it is testing and you’re in first that way I don’t make the same mistakes I have a good day🤣🤣🤣😊
Was the surface slightly wet? Lucky that dude wasn’t hit!
Your channel is epic and I just can’t get enough😃🙏🏻
Great video thanks for sharing! Speed... the elusive monster.
That crash was brutal....hope the driver made it out alive
Saludos sigue con el contenido q esta muy bueno cada día pregunta sabes a q velocidad iba? Porque parecía muy rápido y por el tipo de accidente ?
Wow happy no one was hurt☹
I was just thinking how gorgeous both these cars are and pretty quick by the look of ‘em …….. then 😱😰😭 dang!
Love your beautiful work as always Raz!
But damn that was a gnarly crash, very scale like lol 😂
Man I wish I had extra money lmao but sick builds man those are really cool brotha keep on building!
Where do I start 😬
- smashing video 👏👏
- 12s Fg that wheelies 👀👌🏻👏👏
Sorry to see that crash, SHE WAS A BIG ONE 😬 did you have a gps on it Raz? What was its speed as that looked more like a plane crash 😞
Glad to see another great / entertaining video buddy, CZcams is currently lacking a lot of content at the min, so looking forward to more.
Hopefully the car just needs a new chassis and possible front bulk head to put it right?
Thanks brother!
I’ve noticed the compound on the fifth scale wheels is not very sticky and the cars slide around a lot I had the same problem 😞
That makes me want to cry.
Wait until you can 3d print aluminum and steel parts, the world is going to change BIGTIME.
Would you recommend the 8s or 12s I’m bout to order one trying to figure what setup to run
Raz, the impression I got is that this car has so much power that it's going to need better tires in terms of traction...hope you fix it soon and make another pass.
I've been trying to get a 12s esc for a few months, I can't find a reliable source.
Hello, I would like to know if it is possible where I buy the conversion kit to electric, thank you very much
Hi from V&b Speed a new rc community channel stop in say hi thank u
Subscribed through sheer jealousy !
Amazing channel