Happer Premium Prince Jumbo Cloth Drying Rack Assembly Guide

Welcome to the assembly video of your newly purchased Happer Prince Jumbo Drying Rack.
Feel free to pause the video when you feel like.
Let’s begin with the unboxing.
In the box, you will find the following:
- 2 RODS A
- 12 RODS B
- 6 RODS C
- 6 WINGS
- 2 MID & 2 LOWER HAND CONNECTORS
- 2 UPPER HAND CONNECTORS
- 2 HANGER CONNECTORS
- 2 BASE
- 2 HANGERS
- 4 WHEELS
- 12 BOLTS WITH NUTS (FOR WINGS)
- 4 BOLTS WITH NUTS (FOR TOP HAND CONNECTORS)
- 4 SCREWS (FOR BASE)
Let’s begin the assembly.
1. Insert Rods A horizontally in base.
2. Tighten 4 small screws. Insert the wheels in base.
3. Insert Rods B vertically in base and hand connector
4. Insert Rods C horizontally in lower hand connectors
5. Insert Rods B vertically in mid and lower hand connectors. Insert Rod C horizontally in mid Hand connectors
6. Insert Rods B vertically in mid and upper hand connectors. Insert the upper hand connectors few inches through Rod B to make room for hanger connectors.
7. Insert Rods C horizontally in upper hand connectors. Tighten the upper hand connectors using small nuts and bolts.
7. Insert hanger connectors in Rods B. Insert hangers in hanger connectors.
8. Install the 6 wings in hand connector using big bolts and nuts
9. Flip out the wings and lock them by pushing them horizontally.
Congrats! Your drying rack is ready to be used.