Creating Your Custom Wardrobe: Expert Tips and Tricks
Vložit
- čas přidán 8. 09. 2024
- Building a custom wardrobe using mdf panels and laminated boards for carcasses this took me one day of work.
is actually not a wardrobe but I don’t know in what type of furniture I should set it on. it was installed on leaving room as you might see it in the video.
larders are 2150 tall 800 wide and middle sections are 1000 by 950
top middle box having hidden compartments with falling doors.
here is my amazon affiliate’s links of tools i used in this video:
trolley cart amzn.to/45fkNEj
countersink bit amzn.to/3rzI2eE
saw track amzn.to/3rrD3wF
small drill12v amzn.to/3PFwJth
dust nozzle amzn.to/3ZGA5kf
multitool amzn.to/3M8kGnB
pica pencil amzn.to/3Q1XaLk
52 teeth blade amzn.to/3PEhQrk
36t saw blade amzn.to/3tm8YPk
camera tripod amzn.to/3RDn3SN
u scribe jig tool amzn.to/3rL9OVA
glue miter fast amzn.to/45thN7C
Wardrobe fittingWardrobe installation
Very nice job. I especially like your technique with the glue and activator. You only spray activator on a few parts clearly to hold in place while the the rest of the glue sets naturally. I also like the clamp against the architrave whilst you get the inside fixing….. smooth! I was hoping to see how you trimmed the excess from the iron on edge banding…. Maybe next time . Love you work man👍🏻
Thank you very much!I have other videos showing that you can check out,for example sliding wardrobe ones ,thanks for watching and commenting on my videos 🙏🙏
Nicely done , i pretty much do the exact same work as you , festool everything, recently added the new cordless table saw , it's a game changer , excellent extraction for indoor use and makes very fast work of fillers , carvex not Been out the systainer since 👍
Alright I get it thanks for watching and sharing your opinion and experience
Genius! Excelent work. The best that i see in you tube. Grettings from Argentina
Thank you! Cheers!
Great job pal. What is the blue base on the track saw mate
Thank you , well acti tried to mask the tools as many people think I’m sponsored by festool 🤷🏻♂️😂
🤣🤣🤣.
As usual making look everything easy to do. And as usual just next level s skills with amazing results
Thank you so much 😊 nice compliment 🙏🙏
As always cool video 👍😉
Thank you 😊
👏👏👏👏👏👏👏👏
Extraordinário...🇧🇷🇧🇷
Thank you for watching 🙏🙏
Hats off Sir, as always
Thank you sir 🙏
👍👏 Magnifique 💪👏💪 Magnifique 👍👏
Thank you 🙏
@@CAVjoinery Merci beaucoup A Vous 🤲❤️
I subscribe your channel. Great pleasure to watch your job. Please don't stop making new videos. Btw. what is this green device to measure distance of 20mm?
Thank you so much, I will, here amazon link for it amzn.to/3QKiCEM
Bonjour A Vous Merci A Vous Pour Votre Magnifique Videos 📽️ Toujours UN Grand Plaisir A Regarder 🤲👍💪👏
Thank you so much for supporting me channel by commenting on my videos and watching em 🙏🙏
@@CAVjoinery Merci beaucoup A Vous 🤲❤️
Great job
Thanks 🙏
Esperando te encuentres bien , es agradable ver que lo haces con pasion y lo necesario para dejar satisfecho a tus clientes. por otra parte a que medida dejas las patas de la base????, bendiciones!!!
Thanks i left 100 mm
good job
from morocco
Thank you same from here uk 👍👌
Hi. What was the jig that you showed on 3:37?
Love watching you work. Where do you get your kitchens from
Thanks,from home design
Great work! Do you work with furniture designer or the project is done by you from the start, like you buy standart size panels or kitchen boxes and then you work it out if needed while fitting it on the spot?
No i just fit them
Amazing work as usual! Where did you get your scribe block from?
Hey there,thanks have a look on my amazon link www.amazon.co.uk/shop/cavjoinery/photo/amzn1.shoppablemedia.v1.04b78fba-e593-4edc-8b64-83bddfc87a69?ref_=cm_sw_r_cp_ud_aipsfphoto_aipsfcavjoinery_3ET9MR4DZTWDYJF46MGQ
Great job..how can we engage you if need be on projects like this .
Buen trabajo
Thank you 🙏
Im looking to make something similar. What do you use to make the cabinets and where can i buy it? Thankyou
Chipboard laminate are called
Hello would love to see your process for levelling everything?
Ok I will do a video in the next day with some info thanks 🙏
Where can I buy the green adjustment gadget at 3:35 in the video?
Here is amazon affiliate link amzn.to/3QKiCEM
Маэстро 👏👏👏👏👏👏👏😁👍🤝
Thank you so much ☺️
Beautiful job. What glue you use? Thanks
Hey there I was send from tiktok shop guy like 10 bottles of that called OILY GLUE
Thank you for watching
@@CAVjoinery Thank you. Pleasure to watch you work.
Hey - Great Job - What is the exact name of this green thing in your hand at 3:36?
Margin tool is called here is an amazon link for it amzn.to/3RUNUIr
Good job!! Where do you get your materials from?
Thanks from home design hq
Great vid, where did you purchase the doors and pannel s from.
Thank you i got them from home design hq actually they get them from somewhere
Thanks, just starting out and just trying to find suppliers, anywhere else you would recommend?
Thanks for muting the audio when running the saw!
No worries!!😉
To hang units off so far with L brackets.. I take it your worktops are always 616mm.
There’s no kitchen here and always a reason for that like ; hob sink gola etc
Where do you order those panels? Does anybody know if something like that in the United States?
No I think they are not that common in the states thanks called laminate boards
Was ist das für eine Schablone zum einstellen der Schranküberstände ? Hab dafür eine einstellbare Metalllehre , aber das kleine Teil ist viel praktischer…. Wo gibt es das ?
Be more precise sir I didn’t understand what you were referring about,sorry and thanks for watching
You just work for someone else amd fit things (very well), or you create everythimg? Im curious bout that
No on this one no but the smal projects thanaks so much
Класс!
Thanks 🙏
Getirdin pis zemin üstüne yeni dolap koydun hiç oldu mu ?
Sorry?
@@CAVjoinery No problem, it's very nice
Шканти, релігія заважає ставити?
Sorry didn’t understand
Custom out of a box 😂
Yap