Honeycomb racing stripes- fits any car! Installed on Dodge Charger from Luxe Auto Concepts
Vložit
- čas přidán 14. 07. 2024
- FEATURED IN VIDEO:
- Standard Vehicle Stripe Kit - Single 20" Honeycomb, 3M Satin Dark Gray
- Standard Vehicle Stripe Kit - Dual Pinstripes, Pre-Spaced- Yellow
Looking to add a honeycomb stripe to your car? Now you can with our easy DIY stripes that come computer cut and pre-masked for easy installation. The stripe sections can easily be extended to any length by butting up the transfer paper on the stripe sections on the vehicle. These are not just available in honey comb pattern-- we also have solid stripes, single, double, and pinstripe kits available. New designs and vinyls being added all the time.
SHOP HERE: www.luxeautoconcepts.net/coll...
0:00 Front bumper- lower
2:36 Front bumper- upper
7:15 Hood
9:59 Roof
13:55 Rear
- Our stripe kits are designed to give DIY installers all the tools needed to achieve a perfect install. We apply transfer mask to each stripe and even include temporary vinyl spacers with dual stripe kits.
- The transfer mask is even designed purposefully to help you achieve perfect spacing between stripe sections to accommodate any length. Just butt each stripe up with the mask touching and presto!
- If you chose standard or premium vinyl types then the transfer mask will stretch to conform to moderate curves with the vinyl. If using basic or reflective vinyl you will need to cut the transfer paper at curves to not get wrinkles.
Have a design in mind that we don't offer? Contact our custom department at custom@luxeautoconcepts.net.
SHOP: luxeautoconcepts.net
Instagram: / luxeautoconcepts
Facebook: / luxeautoconcepts
Twitter: / luxeautoconcept
Get in touch: 1-888-752-LUXE or contact@luxeautoconcepts.net - Auta a dopravní prostředky
Dang why yall didnt show how y'all did the inside of the hood scoop!!!
awesome
Dang, the most important pat, how to form it to the hood scoop, y'all skipped. lol
If anything honeycomb for trans am
This stripe fits any car.
Where can I get those tail light wrap
Here you go - www.luxeautoconcepts.net/products/ulwtk3dmlhcs?_pos=1&_sid=ac929ff1d&_ss=r
How wide is the gap between the honeycomb and the pin stripe here?
1/2 inch pinstripe with 1/4 wide gap - featured in this video: czcams.com/video/hPBVw8pZeUI/video.html
@@LuxeAutoConcepts Awesome. Thanks! :)
Would this look good on a Kia stinger?
Of course!
Damn you guys should've took some better video further back so we can see what it really looks like because I couldn't get a feel for the whole car from the short after video