DJI O3 Alternative! Convert your Mobula 8/Bassline to a 4K Cinewhoop!

We will walkthrough how to covert your Happymodel MOB 8/ Bassline to a 4K Cinewhoop with the Runcam Thumb Pro V2 4K.
Looking for lipos? Check out CNHL (Affiliated but no extra cost for you) chinahobbyline.com/?ref=1POZw...
Runcam Thumb Pro Mount: www.thingiverse.com/thing:609...
Have some questions? Leave a comment below or message me at my IG account.
iflyxwing?i...
Want to buy me a coffee to support this channel? Thanks in advance!
bmc.link/iflyxwing
0:00 Intro
0:15 Parts Explained
1:30 Wiring Diagram
1:51 Solder & Install
2:40 Multi Meter & LIPO Test
3:27 Reassemble
5:13 Flight Footage

[@iFLYXWings6589]

Want to know how to Bind your Mobula 8? Check this czcams.com/video/JLqjk_Up-ZM/video.html

[@MilneFPV]

Another good one! Thanks!

[@iFLYXWings6589]

Thanks as always

[@fpvdev]

Great footage, well done 👍

[@iFLYXWings6589]

Thanks brother !

[@bugsy742]

THIS is what I was as looking for ✊👍🤝🤝🤝

[@iFLYXWings6589]

Glad it helped !

[@DronePH-2024]

WOW great news sir for upgrading I have also Mobula 8 thanks for sharing 👍👍👍

[@iFLYXWings6589]

Thanks, strongly suggest you upgrade. Super light and quite

[@Outdoorandfpv]

LOVE TO MOBULA

[@h2o40fpv]

excellent video I do want to do that with mine too love it thank you.

[@iFLYXWings6589]

Thanks man!

[@onclefly8450]

Hi, great thank Bro for this video and the link for canopy. 👍👍🌈🌈

[@iFLYXWings6589]

Thank you! Glad you like it!

[@thevulturefpv]

Gonna have to get that mob8 now

[@iFLYXWings6589]

You will love it !

[@thevulturefpv]

@@iFLYXWings6589 it's here and you were right I totally love this little ripper. First 2s quad. Micro is the way!

[@GmGardna]

Please tell me what converter you use? Can I get a link?

[@WilsFPV]

Nice build! Now I have to convince the gf to let me get a 3d printer for these kinds of parts XD

[@iFLYXWings6589]

Thanks! Good luck on convincing your GF! I failed to convince my wife lol

[@MurmanskTourist]

@@iFLYXWings6589)))))

[@ufo95]

Is it 4k? My thumb pro 4k does not look this smooth because of 30 fps.did you post processed this?

[@sayros555]

It's great.And what kind of plastic is the mount made of? Petg,pla, tpu

[@iFLYXWings6589]

The mount will be TPU

[@exis221]

Hi.. nice footage and tips.. how you get rid jello effect on Mobula 8?

[@iFLYXWings6589]

Thanks, the analog one I had does not have jello, are you referring to O3 , if that’s the case, sorry I had no idea as I do not have one

[@socalbhiker]

What kind of flight time are you getting with the extra drain of the Runcam? And what mAh battery are you using? 2S, correct?

[@iFLYXWings6589]

For a 2S 450mah still getting about 2:30 to 3:00 min flight time. I don’t think the extra drain for the RunCam is significant

[@andres.freelancer]

Hi, can you please share an url or the specific name of the converter cable do you use to convert from 3pin sh to a 4pin jst? Thanks a lot

[@iFLYXWings6589]

flywoo.net/products/runcam-thumb-pro-camrea-adapter-cable
Here you go

[@anthonynave4875]

Thanks for sharing. Is it only a cable adapter or is it doing more? I see some electronics in it. Thanks in advance.

[@anthonynave4875]

Thanks for sharing. Isn't the video a bit scattered? Any way you recommend to avoid this?

[@iFLYXWings6589]

Well… this comes with the camera

[@anthonynave4875]

@@iFLYXWings6589 Got it, it is due to the 30fps I guess. You inspired me and I just finished to install the Thumb Pro. I used the UART port to start and stop recording. Also had to change the camera direction of 90 degrees because the analog camera cable was too short with the 3d printed canopy. Managed to get my first video but far from your result, lots of vibration. Need to learn how to use Gyroflow because so far it did not help with that.

[@C-V-Z]

@@anthonynave4875 The vibration could be caused by loose parts or damaged props. If all those are in check, it might need some pid tune adjustments while the camera is attached so it can be tuned with the extra mass present.

[@megiMove]

Is it possible to get a tpu mount that works with caddx peanuts ?? 🙈🙈🤔🤔

[@iFLYXWings6589]

This one might work
www.thingiverse.com/thing:5422187

[@lsssAAaAa]

What is the project time with this setup? what batteries?

[@iFLYXWings6589]

If you mean how long does it take to complete this setup, i will say its around 1 -1.5 hours. This is a 2S drone by default.

[@brendanohalloran892]

Why did you use a 5v regulator when you soldered to a 5v pad?

[@iFLYXWings6589]

As I was explaining in the video, the main issue is i need to convert the plugs from SH to JST, I just don’t have a JST plug directly at the time 😅

[@WatsitTooyah]

@@iFLYXWings6589 So is it an ok idea to skip the regulator?

[@iFLYXWings6589]

@@WatsitTooyah Yes, it should be totally fine

[@funknunkl]

Just solder the jst cable to the fc

[@Forino99]

could this also be done on a mobula 7 1s ?

[@iFLYXWings6589]

Yes, I think so

[@lsssAAaAa]

It will be to have for this