How to Fix SONY Android TV Not Turning On! (Main Board Swap!)

Sdílet
Vložit
  • čas přidán 25. 06. 2024
  • I picked up a Sony Bravia XBR55X810C for FREE that stopped working and challenged myself to see if I can get it working. Symptoms include no power on plugging into the wall and testing turning it on. Power board in standby showed voltages just fine. After swapping power board, TV stayed off. After swapping MAIN board, TV is alive again!
    How to fix:
    1. Remove back cover
    2. Test voltage of power board with cord plugged into wall
    3. Order appropriate board
    A. No voltage on power board? Replace that
    B. Yes voltage on power board? Probably main board issue
    4. Swap the board
    5. Put it back together
    6. Should turn on. Good luck!
    I hope this helps someone out there! This process should work for these TVs as well: XBR55X810C, XBR65X900E, XBR55X800E, XBR55X900C, KDL75W850C, XBR65X850C, XBR55X850D, XBR75X940D, XBR65X810C, XBR65X930C
    #sony #nopower #xbr55x810c
  • Věda a technologie

Komentáře • 112

  • @DubstepHntr5280
    @DubstepHntr5280 Před 2 lety

    You're a life saver! I just got one free from Facebook!

  • @markkissoon5998
    @markkissoon5998 Před rokem

    Great how-to video. Thank you

  • @bloodcrips24
    @bloodcrips24 Před rokem +1

    Hi. Can you help me please? I am looking for the motherboard for a Sony KD55A1 Thank you very much

  • @dmtycn
    @dmtycn Před 2 lety +2

    I have a 65X810C which goes into boot loop today. After hard reset, no luck. Do you mind tell me how to check the power board?

  • @peterkioko5696
    @peterkioko5696 Před rokem

    Hi Edward
    Am looking for a Sony TV x855c main board advice.

  • @RomanTheUTubeWatcher
    @RomanTheUTubeWatcher Před 3 měsíci

    Hi Edward, my model is XBR55X810C, dead LED light (everything appears dead). How can I first eliminate the Power supply? I’m reading 3V only on the 3rd and 4th pins on the button row of the main 14x2 pin connector # CN6401.

  • @paulwhampel
    @paulwhampel Před 2 lety +1

    Hi Edward. Great video! A question: Did you need to update the firmware on the replacement board or was this a plug-and-play situation where the new board worked immediately without needing to download an update from Sony and the TV was immediately operational after the replacement? Thanks for your guidance!

    • @EdwardInTX
      @EdwardInTX  Před 2 lety +2

      It was plug and play

    • @mrs.flores6950
      @mrs.flores6950 Před rokem +1

      👆🏻 exact same question I had! Thanks for asking. Just went back to a TV repair shop and rescued my TV. They wanted $400 to replace the motherboard. When I told them I found the part online for $89 and I would just assume do it myself, they tried to scare me with updating firmware and downloading who knows what. 🙄 I’m taking my chances and buying a used part on eBay. :)

    • @markkissoon5998
      @markkissoon5998 Před rokem

      @@mrs.flores6950 good job on doing it yourself. How did it turn out?

    • @mrs.flores6950
      @mrs.flores6950 Před rokem

      @@markkissoon5998 😢 wasn’t the motherboard after all… The TV sits behind the new one we bought to replace it because my husband refuses to give up. 😂

    • @markkissoon5998
      @markkissoon5998 Před rokem

      @@mrs.flores6950 lol 😂

  • @sorentv6932
    @sorentv6932 Před 2 lety

    i have a sony tv kdl 43w800c model which is blinking 3 times in color red, i swap the main board but the result is green and orange color 11 times and no display , then i make firmware update thru usb /flasdrive but still no display, please help me how can i fix it, also fyi i have formatted the usb in fat32 is it correct i want to know. plss.

  • @marilyngullette2059
    @marilyngullette2059 Před 3 měsíci

    Thank you!

  • @wattsclearchannelwattsclearcha

    nice video ..quick question did you have to update the firmware on the new main board? i have a 65-a8f had a power surge no lite no nothing. i replaced the big power supply board still nothing. getting ready to order a used main board any suggestions? tks

    • @EdwardInTX
      @EdwardInTX  Před rokem

      Didn't have to update the firmware. Check the other boards for swelled capacitors or potential burns. If inclined, there are pins you can test voltage.

  • @wildhog7210
    @wildhog7210 Před 2 lety +1

    Thank you I should have check this out 2 years ago when I had a technician replace it for $500, I did mention to him that I'm basically paying a 250$ subscription fee to Sony every year. We'll time to pay it again...or buy something that is not going to fail every 2 years.

  • @mipad553
    @mipad553 Před rokem

    Can I put Sony mother board to another brand tv for same size

  • @BooBoo-pu1jh
    @BooBoo-pu1jh Před 3 lety +2

    That was interesting. I never thought about fixing a TV.....great idea!
    What's your cats name? He definitely should be in your videos

    • @EdwardInTX
      @EdwardInTX  Před 3 lety +3

      Absolutely. The boards are similar to computer boards (thankfully). Some of the manufacturers are more insane and link them, where programming gets harder.
      My cat's name is Mew (like the Pokemon)

  • @lawrenceabella9663
    @lawrenceabella9663 Před 2 lety

    sony bravia tv 40 inches no power or not working model kl-40w657 what to do ??

  • @cholsthebarber
    @cholsthebarber Před rokem

    pls help me my tv just like issue how can i fix.

  • @BaljinderSINGH-pc6rt
    @BaljinderSINGH-pc6rt Před 2 lety

    Hello Edward do we have service mode in sony main board? . Can we fit 65 inch main board to 55 inch tv ?

    • @EdwardInTX
      @EdwardInTX  Před 2 lety

      Not sure about service mode. Stay with the 55 inch board.

  • @santiagoibarraryan5666
    @santiagoibarraryan5666 Před 4 měsíci

    Nice video! I have the same Tv. Edward do you think that the main board would be the problem when the picture is ok when I turn the tv on and one or two minutes later the screen starts showing vertical lines?
    Thank you!

  • @mustafaaksu9922
    @mustafaaksu9922 Před 2 lety

    Hello. I have a Sony KD 55xg8096 model TV. I wanted to open it in the morning, it did not open. is not illuminated. Where do you think is the problem? And which part do I need to replace? Thanks in advance

    • @EdwardInTX
      @EdwardInTX  Před 2 lety +1

      Might be main or power. If you have a tester, it would help in determining which one

  • @johnwilder5185
    @johnwilder5185 Před 3 lety +1

    Where did you purchase the main board? Thanks..great video!

  • @timedwards9387
    @timedwards9387 Před 2 lety

    Where in TX are you?

  • @andrewruzicka8765
    @andrewruzicka8765 Před 2 lety +2

    hSony KD-55XF7596 Bravia and have just changed the Mainboard. i am in a mode which changes Color Red,Blue green and white + Music . I guess the motherboard is new . Do you have am idea what i can do? Thanks in advance

  • @docgonzo1973
    @docgonzo1973 Před rokem

    FYI Sony has very good customer service. Always ask for a supervisor and be nice. I have seen Sony extend warranties on some of there tvs that were up to a year out of warranty.

  • @asadali460
    @asadali460 Před 2 lety

    HI thanks for the great info . We have a Sony XBR 85X 850D which was working fine in the morning but when we came back from work was dead and no power or light will come on . We were able to take off the back cover . Noticed there are 4 boards in the back . Tested the 1st board using the multi meter and verified the 110 AC coming in and out . But the 2nd board which we think is the 2ndry power board had 110 Volt coming in but we couldnt verify voltage going out . Now we couldnt test the 3rd( some kind of green tuner board) and 4th board (main board ) . We are in the process of ordering the 2nd power supply board but would like to know how to test the 3rd and 4th board . Any insight in this will be helpful . Donot wanna junk the TV as its just 4 years old and was working fine before went to mars

    • @daiwan6580
      @daiwan6580 Před 2 lety

      Please see my postings above. You really want to order all and rule out the good ones to save shipping. TVPartsToday is the best.

    • @lukastemberger
      @lukastemberger Před rokem

      @@daiwan6580 Thank you for this! I was going to order a Sony A8H main board from eBay for $200 and TVpartsToday had the same one for $100! So you just saved me $100 :)
      Easy to find on their website and fast shipping too. Nice.

    • @MIKEYBINDACITAY
      @MIKEYBINDACITAY Před 9 měsíci

      Did it work? I have a Sony XBR 85X 850D also and it just went out.@@lukastemberger @asadali460

  • @anamarin1922
    @anamarin1922 Před rokem

    My tv is on but no picture only sound and the guy told me it was the main bord I still thinking on changing it

  • @Exphen
    @Exphen Před 2 měsíci

    Hey man, i have a kd-49xh9505 and just on the hottest day of the year (25°c currently) my tv won't turn on, it boots on the android tv logo but the tv turns off and there's 4 red blinking lights, i tried several alimentation cycles and checked the boards on the back but i cannot diagnose what the problem is, i'm suspecting it's a overheat problem perhaps ? the tv is 3 and a half yo at this point, i have no way of checking the voltage on both of my boards sadly, any help is appreciated

    • @EdwardInTX
      @EdwardInTX  Před 2 měsíci +1

      if you leave the back open and blow a fan, does it work?

    • @Exphen
      @Exphen Před 2 měsíci

      @@EdwardInTX i have not tried that no, but thanks for the advice

    • @EdwardInTX
      @EdwardInTX  Před 2 měsíci

      @@Exphen asking bc i have 2 sony and one has that issue, i ended up wiring a computer fan over the main board processor chip

  • @Exodus-1991
    @Exodus-1991 Před 3 měsíci

    I have a Sony Bravia XBR-65X850C. I just put a new main board in it yesterday and it fixed the issue. Tv came on. All worked good. I then powered off. Unplugged, setup on stand went to turn on. White light illuminates but no backlight or screen comes on now. I then did the software update using usb and after the white light finishes its flashing process at the bottom it then stays solid but still no screen illuminating. I do hear sound if i hit the source button on TV ill get a chime that comes from the speakers. What did i do wrong ugh

    • @EdwardInTX
      @EdwardInTX  Před 3 měsíci

      Sounds like T CON failed as well

    • @EdwardInTX
      @EdwardInTX  Před 3 měsíci +1

      or loose cable between main board and t con

    • @Exodus-1991
      @Exodus-1991 Před 3 měsíci

      @@EdwardInTX hey thanks I got it. Tcon board cable was loose!

    • @EdwardInTX
      @EdwardInTX  Před 3 měsíci

      nice!@@Exodus-1991

  • @pawelkunysz3000
    @pawelkunysz3000 Před 9 měsíci

    Chip eMMc was folty on board. You need replace only this if you can. No need new board.

  • @HoldTheDoorCollectibles
    @HoldTheDoorCollectibles Před 11 měsíci

    Questsion! I think my xbr75x900f needs a new power supply board (blinks red 3x and turns off on its own)
    I can get a board for 75$ but the shop said even tho it’s plug and play… Sony parts require programming… you don’t do programming in your video… so are they lying? Should I just order one and try?

    • @EdwardInTX
      @EdwardInTX  Před 11 měsíci +1

      Correct, I didn't do programming -- just order and try

    • @HoldTheDoorCollectibles
      @HoldTheDoorCollectibles Před 11 měsíci

      @@EdwardInTX thanks very much for your reply. I’m going for it!

    • @EdwardInTX
      @EdwardInTX  Před 11 měsíci

      @@HoldTheDoorCollectibles good luck!

  • @mankoun
    @mankoun Před rokem

    Inspired me to try fixing my broken TV myself. It's an XR-75X90J. Won't turn on and the LED blinks red 3 times. You think it's the mainboard or the power board?

    • @EdwardInTX
      @EdwardInTX  Před rokem +1

      i'm betting on main

    • @mankoun
      @mankoun Před rokem

      @@EdwardInTX thanks! Let's see! I hope so too

    • @EdwardInTX
      @EdwardInTX  Před rokem

      @@mankoun get one where seller adverts free returns. helps with tv repairs.

    • @mankoun
      @mankoun Před rokem +1

      @@EdwardInTX thanks! I just connected the new main board. No red flashing led. The screen is backlit but nothing else happens. I tried updating the firmware with the USB drive but nothing different is happening. Any ideas?

    • @crisroyal4665
      @crisroyal4665 Před rokem

      @@mankoun
      T-con ?!....🤔
      How did it go??

  • @fieldtrailer
    @fieldtrailer Před rokem

    Did you get the red blinking lights?

  • @maximelevesque5914
    @maximelevesque5914 Před rokem

    hi i have a sony KDL50W800C no power at all dead tv . i changed power supply board doesnt worked . my power cord have 19 V when i unplug between PS board and Mainboard the backlight goes on . its looks like mainboard issue ... i bought a new one and still doesnt work ........

    • @EdwardInTX
      @EdwardInTX  Před rokem

      How about TCON?

    • @maximelevesque5914
      @maximelevesque5914 Před rokem

      the issue was finally the mainboard . i bought the PSboard but it was defect lol .. i bought a mainboard and put back my old powersupply board and now working

    • @EdwardInTX
      @EdwardInTX  Před rokem

      @@maximelevesque5914 very nice!

  • @daiwan6580
    @daiwan6580 Před 2 lety +1

    I have Sony XBR-75x850c tv. One day everything is dead. The TV does not come with standby light. I checked one of the two power supply boards. The one with standby 3.3v I got it but not 12V on other pins. Does it mean this board is bad?

    • @EdwardInTX
      @EdwardInTX  Před 2 lety +1

      That sounds like main board

    • @daiwan6580
      @daiwan6580 Před 2 lety

      @@EdwardInTX thanks! I bought all three boards to try.

    • @daiwan6580
      @daiwan6580 Před 2 lety +1

      @@EdwardInTX fixed my Sony TV. Thanks to you. My Sony 75” was headed to dumpster until I saw CZcams video on diagnosis. Your videos are particularly useful. I bought all three boards just in case and main board is the one. $94+shipping+$20 restocking fees for returning unused board+shipping back. Less than $150. TV costs $2600+ bought 4 years ago. You are life saver. Key was standby voltage. You are the best! From a Taiwanese with appreciation to you!
      LOL, I had to buy a remote because I assume this TV was going to be trashed and I threw remote away. Amazon, $10.

    • @EdwardInTX
      @EdwardInTX  Před 2 lety

      @@daiwan6580 Wow, I am very happy that this solved your problem!

    • @silentknight612
      @silentknight612 Před 2 lety

      I got the same exact tv you have and same problem. I just order the main board today hopefully it will fix the issue.

  • @kateumber6905
    @kateumber6905 Před měsícem

    Where did u buy your board

  • @paracuja
    @paracuja Před rokem +1

    Same problem ... my Sony X900H suvived 2 years and 5 Months and yesterday it didn't turn on again. Ordered a main board on ebay for about 65€ ... let's see 😂

  • @lawrenceabella9663
    @lawrenceabella9663 Před 2 lety

    sony bravia tv 40 inches no power or not working model kl-40w657 no also light indicator

  • @moosakda4890
    @moosakda4890 Před rokem

    Watch this video just for how to remove the ribbon cable (the biggest one) Thank you.😌😌

  • @robertb6661
    @robertb6661 Před rokem

    red light flashing......press on button......goes green then goes back to red??

  • @happyisblue
    @happyisblue Před 2 lety

    My 65" A8H won't turn on after 10 months of owning it, and I watch no more than 2 hours per week.

    • @lukastemberger
      @lukastemberger Před rokem +1

      Exactly the problem I had after a year and a half. You were still in the warranty period though, so I guess they fixed it.
      I'll try ordering the main board now.

    • @happyisblue
      @happyisblue Před rokem

      @@lukastemberger yup, after they installed new boards it's been working great. Hope you get yours fixed soon

  • @nzajflynn
    @nzajflynn Před 2 lety

    Bugger.. This is probably my problem. I just brought a new remote. Dam you sony.

  • @MyName-yi4ws
    @MyName-yi4ws Před 2 lety

    Hi Edward, great video. I think this video brings out a really bad and poor design choice by Sony engineers, not allowing the replacement of the power cord. Why have they taken this poor decision? which benefits?

    • @robbob4872
      @robbob4872 Před 2 lety +1

      Power cord can be easily replaced..

    • @MIKEYBINDACITAY
      @MIKEYBINDACITAY Před 9 měsíci

      Ya power cord can be replaced- the question is IS the problem the power cord.

  • @iliasog2914
    @iliasog2914 Před 3 lety

    my tv is stucked on updating mode pls help me🥺😭😭😭😭😭

    • @aboedhoe
      @aboedhoe Před 2 lety

      Mine too. Please avdise

    • @timedwards9387
      @timedwards9387 Před 2 lety

      CZcams "Sony TV Hard Reset". Many times, here are the steps:
      1)Unplug TV for 2 minutes. Keep unplugged.
      2)Hold down the POWER and the VOL - bottoms for 30 seconds. (Keep holding)
      3)Plug TV back in and hold until system powers back up.
      That should reset your TV to factory settings.
      Good Luck!

    • @iliasog2914
      @iliasog2914 Před 2 lety

      @@timedwards9387 finally i changed the TV lol

  • @LANCECASTLE490
    @LANCECASTLE490 Před 8 měsíci

    Nerd