CAM ONLY 5.3 LS Swapped 3rd Gen Camaro Goes 12s @ 109MPH!!! I Was Called Out For "Cheating"!!
Vložit
- čas přidán 29. 08. 2024
- In this episode I hit the track again only this time with a fine tuned MSD box and I wired in a two-step rev limter to help with my 60ft times! My Second trial run of the morning I shifted the car just right and set a new PB (From 13.001) to 12.84 @ 108.45MPH. Unfortunately the two-step caught some attention and I was called out for using "electronics" that were not allowed in the class I was in. So for the rest of the day I had to foot brake the car..
you give it the beans wfo
Hope I can get mine running this good
Just did the 5.3 cam only swap in my Camaro, ran 12.47 with a BTR Stage 2 Turbo cam on motor.
Congratulations on getting in the twelves.
Good luck next weekend.
Awesome mane can't wait to get my Camaro going motivation.
Earlville Iowa. Nice track!
Awesome car man it runs hard I just got my 3rd gen in the 12s on foot brake couple weeks ago I ran 12.82 at 107mph on just motor with 3.73 gears th350 and 3k stall but I'm gonna change gears to 4.11 see if I can get low 12s maybe high 11s and again man that's an awesome ride
Curious, what size tire you running and what rpm you at crossing the 1/4 mile?
Props man for being honest. It doesn’t do me a damn bit of good to cheat and win. I’ve about got my ass kicked that way just gotta have good reactions or better than the other guy. Same in a car 💪🏼😜
Good stuff makes me wana go take mine to the track
Looks like fun! Can’t wait to finish my ta. Sadly it’s gonna be a couple months
Love the background
Congratulations on that 3rd gen I just subed to ur channel keep up the great work u do
Thanks!
What cage is that? Summit kit?
S&W, bought it thru Spohn of I recall..
Thanks for showing 1/4 numbers and not putting them at the end of the video, its definitely a fast setup!!!
Great content
Loved the video buddy! Let’s get together soon so I can check that 3rd gen out! Been too long!
What cam do you have in it?
I’m planning on doing a Truck 5.3 and 4L60E LS swap on my 1990 camaro z28. What kit do I need? Do I have to change the oil pan or transmission pan? Any info will help me a bunch. Thanks
I got a 91 s10 with sloppy stage 2 cam longtubes holly single plane and quick fuel 750 .3.73 gears 3200 stall msd 6014 box 8.8 rear and th400 ints a nitrous truck but na I run 7.95 and 89 and 12.43 and 110. On the street with draggy the truck is a low 7 sec and mid 11 on 100 shot at the strip but we got about the same setup ..curious what is your timming mine is 31 degrees from 3500 to 6500 and 32 degrees at 7000rpm try footbrake man my truck is slower on 2 step my adjustable shocks and assassin bars are way off I have good suspension but your not far from low 12.s na man keep it up
I'd have to look at my last timing ramp but I believe I was running 32* from about 4k on up..
@@KravasGarage yea I been thinking about going to a mid or high rise single plane but I like the low and mid of the duel plane the truck makes good power up top anyway
My question is how much have you used the Sniper? I’m looking to see pros and cons.
Hey man, had a quick question. I rmbr in one of your older videos you had used the factory dished flexplate mated to a th400 with one of those adapters. What / how did you space your torque convertor and flywheel? What size bolts did you use? Really appreciate it. Hopefully you see this.
IIRC it was 3/16" gap, I used 3 washers that I measured carefully with a caliper to ensure they were all the same...and grade 8 flanged bolts with flanged lock nuts with a drop of locktite to be safe.. I think they were 3/8 bolts..
@@KravasGarage wow not used to youtubers replying! I'm going to give her a shot tonight. Thanks brother 🙏!
@@KravasGarage Did you have to add a return fuel line? Forgive me if you mentioned this in a video already.
@@paulsingh2579 negative, I used all the stock plumbing, which was pressure, return and two vent lines that are obsolete but still in place..
What’s ur timing table looking like on msd
What shifter do you have for your car?
B&m Pro Ratchet
what rear end ratio you runnin?
What are the specs on the camshaft
The Ls Gens are not even close to being technical a vortex motor to much to explain but cm on these motors Been around at least 2 decades. An still people spread miss info why I don't know. But nice 3rd Gen.
Not a Vortec SBC but GM literally called all of the LS based truck engines "Vortec" from 1999-2013. The LT based truck engines from 2014 to now are called EcoTec3.