Dai, Could you kindly inform me about the degree of rotation reduction that a quick throttle typically provides? Is it accurate to state that the full rotation is generally diminished to a 1/4 of the original rotation? Additionally, is it possible to adjust the quick throttle in order to obtain a less sensitive output, such as 1/2 the rotation or even less than that?
Nop u can not adjust the throttle to obtain less sensitive output but however u can easily control it with your wrist. It will be very difficult for me to to say the actual figure but the reduction is quite significant. Also many people told me that after installing one it will be very difficult to ride it on a busy street..it wasn’t
Don’t worry bro just remove the top cap of the quick throttle and apply some lubricant and see the difference. It happens especially in rainy season . Happened with me too
Yes the string needs to be lubricated as it revolves around a pulley so adding a lubricant really helps. Also u have to keep lubricating it after regular interval
You are going great... Keep going
You are really providing quality content. Love to see your dedication ❤
Thank you 😊
Very useful video💯
❤❤❤
👏👏🎉👌👌
10k soon 🥳🥳🤩
Hopefully soon
Dai, Could you kindly inform me about the degree of rotation reduction that a quick throttle typically provides? Is it accurate to state that the full rotation is generally diminished to a 1/4 of the original rotation? Additionally, is it possible to adjust the quick throttle in order to obtain a less sensitive output, such as 1/2 the rotation or even less than that?
Nop u can not adjust the throttle to obtain less sensitive output but however u can easily control it with your wrist. It will be very difficult for me to to say the actual figure but the reduction is quite significant. Also many people told me that after installing one it will be very difficult to ride it on a busy street..it wasn’t
Good video
Thank you 😊
What kind of clutch will be best suitable for this kind of throttle for gear shifting?? Full or half ??
I go for full
Not install it yet how does it feel
Quite used to now..feels good
Bhaiya ap na bike paint kiya ha
Nahi stickers hai
this bike really kitt yea stock bike
Stock
Da next tail tidy modified garnu
Sure
Why change the new accelerator cable tho?
Cause it requires another cable bro
The one provided is short also the cable is very thin so
Daai want to ride your bike☺
Soon it will be available to ride at SBR adventure park
I followed your each and every step.
But now my throttle is really jammed
Don’t worry bro just remove the top cap of the quick throttle and apply some lubricant and see the difference. It happens especially in rainy season . Happened with me too
was it jammed the day you installed it?
Yes the string needs to be lubricated as it revolves around a pulley so adding a lubricant really helps. Also u have to keep lubricating it after regular interval
bs6 or bs4
Bs6
Does the quick throttle feels tight after installing?
Or does it feel loose like the stock?
Yes after couple off use it does feel little tight but you can lubricate the cable and make the play smooth
How u remove the stiker
Dai Cost of the quick throtel?
1500