Euer Arbeitsgelände und die damit verbundenen Schwierigkeiten sind immer sehr anspruchsvoll 👍 Interessant zu sehen, wie man aus solchen Situationen einigermaßen gut rauskommt. 👍👍👍
hier sieht man schön im direkten Vergleich bei ab und zusammenbau der Schienen mit außen und innenliegendem Kettenrad, daß außenliegendes Kettenrad und Kupplung in (572 XP) einfach das besser/schneller System ist. Gruß H.M.
Why start a cut with another tree on top? Why not start your cut from the compression side then shift to the tension when the kerf begins to tighten? Or, why not use a wedge earlier so that it would actually make a difference? I'm new at this, but it seems like a lot of simple stuff was ignored.
Baaa...da hast sie endlich mit viel Kraft und Zeit raus unten und brennst sie gleich wieder fest 😨 und die zweite auch noch...das ist dir bestimmt noch nie passiert, ? Herlich geflucht und super gelöst das Problem 🖒danke für dieses ehrliche und ungeschnittene Video ,hast das Wochenende verdient 😎
Austrian .. what a great person who want to show the world his mistakesss ... and want people get a lesson from it .. for those who brought him into this kind of job should be really proud
Hey! Nice video, as always. I was wondering, do you test the new 572 for Husqvarna or do they sell them in Austria already? Do you have one, two or more, and how do you like them? Greetings from Peter in Sweden.
Schön dass so etwas auch Profis passiert. Da haben nur noch ein paar schadenfrohe Zuschauer gefehlt. Bitte nicht falsch verstehen, aber trotzdem saubere Arbeit. Du hast scheinbar die Ruhe weg. Ich (als Hobbybaumschubser) hätte mir wahrscheinlich zuerst eine Axt geschnappt und irgendeinen unbeteiligten Baum gefällt, damit ich wieder runter komme ;-)
Lots of keyboard worriers here, giving him a hard time, you are all just perfect and all you do is perfect. Thanks for sharing the vids man, great channel. Keep up the great work.
Luggi. You’re absolutely right. I own and operate many saws. About half are Stihl. About a third of them are Husqvarna. There are features I like and dislike about both brands. My comment was meant as good natured kidding. Often the written word fails to convey the intended humor.
Mit Keile kann man manches machen. Keilen zum Beispiel. Und der Bohlenschnitt hilft auch. Wenn dann die aufliegenden Bäume zuerst weg sind sollte das ent..spannter.. gehen.
Sägt man hängende stämme nicht erst von unten bis fast zum kern ein und dann von oben durch um das festsetzen der kettensäge zu verhindern? So hab ich das gelernt
I’m still trying to figure out what this guy’s plan was in the first place. I get trying to cut a jammed saw out, but why cut where there’s a chance of getting the second stuck? Obviously you guessed the compression wrong the first time. Why not relieve the stress somewhere else. It looks like he’s trying to cut for lumber not firewood, so I get not ruining the log. This is just jackassery. You ran into a problem and didn’t stop to think it through before you went and tried to fix it.
I had that happen to me once cutting storm damaged trees. Also got two saws stuck after I listened to a team member's suggestion to use the second saw to free the first one and I had wedges in the log. I had the fortune to have another team member nearby who went and got some heavy equipment to lift the log and both saws just fell out.
@@georgeavery7420 Thank you. I do too but the car was far away. If the other person hadn't have seen me down there I would have taken the bars off and left them there until I could get them out
Super ! Jetzt weiß jeder wie man es nicht machen darf. Bäume die mit zwei Punkten aufliegen, zwischen den Punkten immer von unten sägen ! Zur besseren Übersicht ist es auch immer wichtig quer liegende Bäume und große Äste zu entfernen ! Mfg. Thilo Schieschke.
Looks like he’s cutting a bunch of blow down, it’s more difficult to know where the pressure is at when your logs are laying everywhere! I’ve had days like that
When you fell timber up slope it is best to start the bucking on the up-hill end so that gravity is not so much against you. You can limb and mark the logs as you work your way up. We can still screw-up on occasion.
Even with with wedges that's still some dangerous stuff...I've had big ass sections hold up in place for over a minute after being cut clean thru then let loose out of nowhere.
Deutscher Fail: Ich (m. 14) bin mit meinem Vater am 06.06.2016 auf dem Traktor mit Anhänger in die Stadt gefahren. Bei einer unübersichtlichen Kurve fuhr links ein Auto, dass in diesem Moment rasant von einem zweiten Auto überholt wurde. Sofort drehte mein Vater das Lenkrad nach rechts in einen Steilen Hang. Wir hatten sehr viel Glück das unser Traktor nicht umgekippt ist, denn unser schwerer Kipper hat uns fast mitgerissen. Jemand hat sofort Hilfe geholt, bis auf einer Platzwunde am Kopf meines Vaters ist nichts wildes passiert. Doch leider war das nicht unser einziger Unfall .
Good video but you boys really had the worst luck that day :)) You should,I mean i would take my saw and go for a nice cold beer and come back some other day and come back with tractor or some other machine and pull those timber away if it's possible.Wish you very best and less of acc,like this,cheers.
If you get your chainsaw stuck, and of course, ahem, it's never happened to me, unbolt the bar and move the saw to a safe place and then try to wiggle the bar out. Then re cut the trunk a foot down. You could really damage the saw by trying to wiggle it out by force. The one time it, ahem, never happened to me, I drove home got a new bar and chain and went back.
I was in a woods cutting one day and found 3 bars and chains in this down log. Someone unhooked 3 power heads sometime that morning. I cut the bars out and set them on the log. I took the wood I cut to set them free. Lol. Never did find out who's they were. I did know of a few guys cutting in the same spot I was. They never mentioned it.
8:40 two saws stuck, maybe you need two more. 11:00 loosen the chain tightener clean off the junk wood from on top of the log, maybe it is exerting pressure and it would fall on you if you finish your failed cut.
You should remove the guidebar at the beginning and continue sawing the logs. Or ,several wedges wit big hammer,with you to spread the log and get out the chainsaw.
Warum nicht einfach immer näher am Wurzelstock ein zweites mal absägen? Da hat man weniger Verschleiß als ewig herumzusägen.. Ergänzung: Und es reicht doch einfach 1/3 einsegen auf der Druckseite und dann erst von der Zugseite..?
Ja, es gibt Tage da verliert man und es gibt Tage da gewinnen die anderen ;) War schon ne blöde Situation. Wie lange arbeitest du schon die Sturmschäden auf?
Freakin' storm cleanup, man. You don't get to chose those binds. All I can say is remember that the small end lets more tension loose faster. That's good advice but not at all useful. You work with what you have.
One of those days!! At least he had the balls to put it on CZcams, unlike so many others!
I guess it's quite randomly asking but do anyone know a good place to watch new series online?
@Jayceon Judson Try Flixzone. You can find it on google =)
been there, done that,and know exactly how you feel. that`s when your evening beer tastes really goooooooooood!
Euer Arbeitsgelände und die damit verbundenen Schwierigkeiten sind immer sehr anspruchsvoll 👍 Interessant zu sehen, wie man aus solchen Situationen einigermaßen gut rauskommt. 👍👍👍
Thanks for posting fails AF. There is more to be learnt here than in a vid where everything goes well.
That is true.
It sucks when it happens but it happens to everyone sometime. Hopefully not too often. Thanks for the vids, keep them coming.
Ndankasi
you are really fucked up if your second saw ist not on board or is also stuck !
Fantastic. I have learned so much during last 2 weeks of uncuts. Thank you Austria Forst.
I've been watching this video over a year now is one of my favourite failure video,👍💖🌳
9:57 You're fired!
Thanks for showing. Most loggers would not mention their mishaps and pretend that it does n`t happen to them.
Yes we do. Usually at the restaurant over coffee!😁
hier sieht man schön im direkten Vergleich bei ab und zusammenbau der Schienen mit außen und innenliegendem Kettenrad, daß außenliegendes Kettenrad und Kupplung in (572 XP) einfach das besser/schneller System ist.
Gruß H.M.
Why not start at the bottom and insert a felling wedge when it begins to move?
@Texas CAT Manuals It is really NOT difficult, in case you have IQ 70+
All respect for sharing this. This does happen and expected. Well done to get them out
This was not mega fail. You saved your equipment.
We all have fallen victim of that end way pressure that pinch you.
Good job.
Why start a cut with another tree on top? Why not start your cut from the compression side then shift to the tension when the kerf begins to tighten? Or, why not use a wedge earlier so that it would actually make a difference? I'm new at this, but it seems like a lot of simple stuff was ignored.
Best things are what we learn from are fails ! And you didn’t have to show it either ! Takes more of a person to do that ! Hoo raw ! Fine job
It can only get better.
My friend.
Keep your head up.
Es gibt nicht viele so beruhigende Arbeiten draußen wie Ausasten und Ablängen. Am besten alleine und so wies sich halt gehört.
17:00. Where the boss comes by and says, “What are you doing sitting around and taking your saws apart?? Let’s get some work done!” 😆
Това е толкова откровено. Голямо БРАВО, че е споделено! На всеки може да се случи.
How foes the 572 compare to the 372? Don't really like the outboard clutch. Hey shit happens but it's fixed shortly after. Great vid.
Where is the wedges that you put in the log so you DONT pinge the chainsaw bar ? Just wondering.
Was sagst du zu der maschinellen ketten schleifung also mit einer flex oder so wäre auch was für ein talk video
Baaa...da hast sie endlich mit viel Kraft und Zeit raus unten und brennst sie gleich wieder fest 😨 und die zweite auch noch...das ist dir bestimmt noch nie passiert, ? Herlich geflucht und super gelöst das Problem 🖒danke für dieses ehrliche und ungeschnittene Video ,hast das Wochenende verdient 😎
Andy Wenzlaff da muss man wohl immer mit Keile arbeiten man mag Garnichts glauben welche druck und Zuglasten dahinter stecken..
😂😂😂😂 merci jetzt weiss ich endlich wie man bei beiden husquarna varianten die ketten sauber tauscht!!! danke profi!
schena gruas
vom laien aus bayern
Hey Austria Forst, hast du die 572er 2mal?
Austrian .. what a great person who want to show the world his mistakesss ... and want people get a lesson from it .. for those who brought him into this kind of job should be really proud
Großartig! Danke fürs Teilen. So lernt man in Norddeutschland österreichische Flüche vom Derbsten 😅.
Hey! Nice video, as always. I was wondering, do you test the new 572 for Husqvarna or do they sell them in Austria already? Do you have one, two or more, and how do you like them? Greetings from Peter in Sweden.
Hy Peter I test the new Husqvarna ... but do not sell.
It is now available in Austria. Mfg Austria Forst
Lumberjacks u
Schön dass so etwas auch Profis passiert. Da haben nur noch ein paar schadenfrohe Zuschauer gefehlt. Bitte nicht falsch verstehen, aber trotzdem saubere Arbeit. Du hast scheinbar die Ruhe weg. Ich (als Hobbybaumschubser) hätte mir wahrscheinlich zuerst eine Axt geschnappt und irgendeinen unbeteiligten Baum gefällt, damit ich wieder runter komme ;-)
Lots of keyboard worriers here, giving him a hard time, you are all just perfect and all you do is perfect.
Thanks for sharing the vids man, great channel. Keep up the great work.
Good times and bad. Sometimes you eat the bear, other times he eats you. Excellent video. Great skills and an amazing recovery!!
Great videos and thank you. Keep them coming.
This guy is an Austria "Forstfacharbeiter" he knows more than all off you people saying he´s dumb or not professional, trust me!
LOL.
He makes the exact same mistake over and over again, rather than doing things the correct way. Professional Actor maybe.
You’re funny. If he’s so smart and so professional, then why is he running a Husqvarna?
@@robstone5333 every person who works in the woods got his own favorite chainsaw
@@robstone5333 Stupid Comment
Luggi. You’re absolutely right. I own and operate many saws. About half are Stihl. About a third of them are Husqvarna. There are features I like and dislike about both brands. My comment was meant as good natured kidding. Often the written word fails to convey the intended humor.
You Could have got a third saw stuck in that same spot I'm sure, lol. Gotta hate when bars jam!
Never saw a chain replacement done like that. I'm going to try it the next time I throw a chain or replace!
Mit Keile kann man manches machen. Keilen zum Beispiel.
Und der Bohlenschnitt hilft auch.
Wenn dann die aufliegenden Bäume zuerst weg sind sollte das ent..spannter.. gehen.
Sägt man hängende stämme nicht erst von unten bis fast zum kern ein und dann von oben durch um das festsetzen der kettensäge zu verhindern? So hab ich das gelernt
I’m still trying to figure out what this guy’s plan was in the first place. I get trying to cut a jammed saw out, but why cut where there’s a chance of getting the second stuck? Obviously you guessed the compression wrong the first time. Why not relieve the stress somewhere else. It looks like he’s trying to cut for lumber not firewood, so I get not ruining the log. This is just jackassery. You ran into a problem and didn’t stop to think it through before you went and tried to fix it.
But if we all had a camera for our dumbest moments...
Frank Tucker and and
i think you don't know how it is to cut down treess in the steep austrian mountainsides
I had that happen to me once cutting storm damaged trees. Also got two saws stuck after I listened to a team member's suggestion to use the second saw to free the first one and I had wedges in the log. I had the fortune to have another team member nearby who went and got some heavy equipment to lift the log and both saws just fell out.
Definitely been there, now I keep an extra bar and chain for both of my saws. Only takes a couple of minutes to swap out
@@georgeavery7420 Thank you. I do too but the car was far away. If the other person hadn't have seen me down there I would have taken the bars off and left them there until I could get them out
Servus Austria Forst
I bin froh das du uns zagst dass sowas jedem passiert nid nur uns.
The more you fu*k it up,the smarter/creative you have to be to solve the fu*k up.
Guy's a genius!!
meine Frage? warum hast du nicht zuerst den Lerchen herunter geholt! mfg cc
Have you considered a one man Bucky tooth saw?
How did he find his way into the woods??????
Super !
Jetzt weiß jeder wie man es nicht machen darf.
Bäume die mit zwei Punkten aufliegen, zwischen den Punkten immer von unten sägen !
Zur besseren Übersicht ist es auch immer wichtig quer liegende Bäume und große Äste
zu entfernen !
Mfg. Thilo Schieschke.
Looks like he’s cutting a bunch of blow down, it’s more difficult to know where the pressure is at when your logs are laying everywhere! I’ve had days like that
Bravo, fai vedere anche i momenti difficili,in un lavoro così duro e pericoloso
To painful to watch
How long have you been cutting trees? Two days? First graders, must be.
he is a foratfacharbeiter this means he was taught to do work like this also i bet he knows more about woodcutting than you
No- we all end up in a situation like this! Many factors to consider. . IDK but we try to hurry for a quick fix before someone els sees mistake.
Are you a professional at getting your saw stuck?
A refresher course is what you should enrol in. You’re having a bad day due to your lack of knowledge.
When you fell timber up slope it is best to start the bucking on the up-hill end so that gravity is not so much against you. You can limb and mark the logs as you work your way up. We can still screw-up on occasion.
Even with with wedges that's still some dangerous stuff...I've had big ass sections hold up in place for over a minute after being cut clean thru then let loose out of nowhere.
next time take 3-4 chainsaws for reserve/backup if 2-3 stuck in tree
That's the 2nd time you got the saw pinched. Your having a bad day. Join the club I have plenty of them. It'll get better.
That ole tree likes chainsaws won't let go.
Gut gelöst, ich hätte allerdings das Schwert vorher demontiert, denn das ist gleich gemacht und preiswerter falls etwas schiefläuft.
Noch etwas, erstaunlich wie ruhig Du bleibst, ich hätte geflucht wie ein Rohrspatz! Solche Tage kommen vor, nur gut dass ich da nicht alleine bin!
I love Husqvarna.
can I ask u something?
Deutscher Fail: Ich (m. 14) bin mit meinem Vater am 06.06.2016 auf dem Traktor mit Anhänger in die Stadt gefahren. Bei einer unübersichtlichen Kurve fuhr links ein Auto, dass in diesem Moment rasant von einem zweiten Auto überholt wurde. Sofort drehte mein Vater das Lenkrad nach rechts in einen Steilen Hang. Wir hatten sehr viel Glück das unser Traktor nicht umgekippt ist, denn unser schwerer Kipper hat uns fast mitgerissen. Jemand hat sofort Hilfe geholt, bis auf einer Platzwunde am Kopf meines Vaters ist nichts wildes passiert. Doch leider war das nicht unser einziger Unfall .
Good video but you boys really had the worst luck that day :))
You should,I mean i would take my saw and go for a nice cold beer and come back some other day and come back with tractor or some other machine and pull those timber away if it's possible.Wish you very best and less of acc,like this,cheers.
If you get your chainsaw stuck, and of course, ahem, it's never happened to me, unbolt the bar and move the saw to a safe place and then try to wiggle the bar out. Then re cut the trunk a foot down. You could really damage the saw by trying to wiggle it out by force. The one time it, ahem, never happened to me, I drove home got a new bar and chain and went back.
Je me demande bien comment tu as fait pour obtenir ton diplôme de bûcherons
I was in a woods cutting one day and found 3 bars and chains in this down log. Someone unhooked 3 power heads sometime that morning. I cut the bars out and set them on the log. I took the wood I cut to set them free. Lol. Never did find out who's they were. I did know of a few guys cutting in the same spot I was. They never mentioned it.
A little chainsaw training would go a long ways, it's got to be frustrating learning it the hard way
Use a wedge to open the gap
Been there and done that.Its one of those "shit happens "kind of things
That husky throws some nice chips
If this were me I'd title the video "How I Mega Failed with a Husky 572 Uncut".
8:40 two saws stuck, maybe you need two more. 11:00 loosen the chain tightener clean off the junk wood from on top of the log, maybe it is exerting pressure and it would fall on you if you finish your failed cut.
Just Buck a peace out next to it I'm not a logger but that's what the first thing I'd say to do instead of getting close to your other bar
Go get a Hand SAW.
Menudo profesional...
bad karma Day... 😬💪👍
The way he put those saws back together at the end? Sorry to all you haters but this guy knows what he’s doing!
Were is your ax
I had the same situation twice in one day. Turned out to bad day!
You would perhaps benefit from a longer bar and wedges, just a suggestion not an i know better comment
Dammit Jim!!!I'm a DOCTOR....not a saw man!!!
Unter Druck
Nachher bestimmt Druck in der Hose😎🤓
Nie aufgeben Austria
You should remove the guidebar at the beginning and continue sawing the logs. Or ,several wedges wit big hammer,with you to spread the log and get out the chainsaw.
Die Natur schlägt zurück ;)
well done🤙👍👍
Is this video a joke on what not to do?
Go ahead start at the top but drive a wedge in to lift the top? And relieve the other tree from the pressure side.??
Warum nicht einfach immer näher am Wurzelstock ein zweites mal absägen?
Da hat man weniger Verschleiß als ewig herumzusägen..
Ergänzung:
Und es reicht doch einfach 1/3 einsegen auf der Druckseite und dann erst von der Zugseite..?
Moin,deshalb Stihl ! Beide Sägetypen sind Super .Und Mann braucht Eier für den Job .Guten Rutsch ins neue Jahr . Grüsse aus MV
we all had to start somewhere
Ja, es gibt Tage da verliert man und es gibt Tage da gewinnen die anderen ;)
War schon ne blöde Situation. Wie lange arbeitest du schon die Sturmschäden auf?
1.5 Monate
Austria Forst
Und kein Ende in Sicht oder?
Freakin' storm cleanup, man. You don't get to chose those binds. All I can say is remember that the small end lets more tension loose faster. That's good advice but not at all useful. You work with what you have.
r u saying start at the small end first?
This is why you can’t have too many chainsaws 😉
How about using some wedges in there ? Also get a bigger saw with 3/8'' pitch chain for the big logs. You will spend your whole day like this :(
Mart 572XP in this video should have 3/8 pitch chain, best if C85 chain.
14:37 He said "Orschloch, dreckigs". That means "Dirty asshole" . 🤪👍
Was soll's, so was passiert. Cool, dass Ihr es eingestellt habt.
Forget trying to cut it out, get a jack ! Next time buckhalf way down then finish from the top.
Why does he keep documenting his screw ups. ??
You make Bucking Billy Ray sad man
Emily Euler yes that’s for sure
He needs bucking billy ray to show him how to use a saw the right way
👌
Das haben Sie aber ganz schönes pech gehabt beim Sägen. Super video
Passiert hoit!
What are you going to Try to do next,,, ride a bicycle?