Clocks - Restoring a Longcase / tallcase chapter ring, re waxing & re silvering

Sdílet
Vložit
  • čas přidán 26. 02. 2021
  • This shows a very dirty chapter ring, and the stages to its' transformation.
    I no longer do this as a profession , but I am happy to answer any questions.
    Materials used are shown at the end of the video.

Komentáře • 16

  • @captainhogseye
    @captainhogseye Před 2 lety +1

    It was a real pleasure watching this Sara. I'm a watchmaker and don't really work on clocks, but you taught me something new. Thank you.

  • @KevinWoodsWorkshop
    @KevinWoodsWorkshop Před 2 lety +1

    Very nice job Sara, and thanks for sharing.

  • @tikkin11
    @tikkin11 Před rokem

    I am seeing this years later but appreciate it none the less. I have done numerous dials and it is simply a lot of work! I am unsure of the product you used (at 12:00) to remove the residual wax (the purple liquid). This has always been a struggle point for me in that I tend to unwantingly remove newly applied wax/shellac from the relief areas. Thanks!

  • @jamesnicholson3313
    @jamesnicholson3313 Před 3 lety

    Thankyou for such a good demo of restoring and re silvering the chapter ring I've done a few of them in the past but I much prefer your method as it's more efficient. Jim from AUSTRALIA.

  • @SAHBfan
    @SAHBfan Před 9 měsíci

    I’ve just done this job myself. Unfortunately, I found your video AFTER I’d done it 😡 I followed advice on another video and on a website and they left out two very important steps that you showed us here. Washing out the old wax with ammonia - and wiping off the hot wax with a card. Really, really wish I’d seen that before I did it! I did find, though, that a heat gun (like a super hot hair dryer) worked very well to melt the wax.

  • @jeffcooper7942
    @jeffcooper7942 Před 2 lety +1

    You are good. I have one like that off of a grandfather clock.

  • @larrythomson6840
    @larrythomson6840 Před 8 měsíci

    sara -- many thanks for the wonderful video -- if you are still monitoring the thread -- what cleaner did you use to remove the last vestiges of shellac wax from the chapter ring at 12:10 in the video ? the purple liquid -- you have given me the courage to attempt a similar project --

  • @sandym432
    @sandym432 Před 9 měsíci

    Is the shellac stick the same thing as engravers wax?

  • @patrickmorrissey205
    @patrickmorrissey205 Před 2 lety

    Very useful and informative tutorial. Are you going to tackle anything else LC related / brass backplate for example ?

  • @Martianmonster15
    @Martianmonster15 Před 3 měsíci

    12:01 “So meths” she says. Is that a uk wax cleaner😂the purple stuff, please….

  • @cvetovode9989
    @cvetovode9989 Před 7 měsíci

    Your technology is interesting, and then your hands probably turned black in the sun. 🤣🤣🤣🤣

  • @KevinWoodsWorkshop
    @KevinWoodsWorkshop Před 2 lety +2

    Very nice job Sara, and thanks for sharing.

    • @saraharvey1653
      @saraharvey1653  Před 2 lety

      Thanks for watching!

    • @clockrepairsmerseyside8303
      @clockrepairsmerseyside8303 Před 2 lety

      Great videos Sara, great to see someone going through the job without skipping missing vital information out, great job 👍👍👍👍👍 Regards John, Clock Repairs Merseyside