CARBON FIBER!!!!!!! Kyosho Factory upgrade parts for the Fazer MK2!!!!
Vložit
- čas přidán 16. 08. 2019
- Thanks so much for tuning in to another episode of FSRC! Today we take a look at a few factory upgrade parts from Kyosho! These parts are for the new Fazer MK2 chassis. They include, carbon fiber shock towers (faw222 front) (faw223 rear), a front bumper support (faw226) and the HD aluminum driveshaft! (faw210) the driveshaft will fit the long wheel base versions such as; the hellcat, charger, Chevelle and the rage 2.0!!!! These parts will be available very soon from Kyosho and will really bring your favorite Fazer up to the next level!!!!
I want to give a huge thanks to Kyosho for sending these parts over for me to try out. the quality is amazing, from the performance enhancements to the beauty of the parts themselves.... these upgrades will surely improve your MK2 Fazer in more than one way.
Thanks so much for watching, don't forget to like, subscribe, comment and share and I will see you next time!!!!!!!
Awesome upgrades for a great rig👍👍😁
Great video! Well done! That car is a beast! 💪🏼👍🏼😎
I can’t wait to see you drifting that bad boy with a brushless system in it 🤙🏼
Very nice man. That looks really good. Nice video👍👍
Thanks brotha! I am very pleased with the finished product
Nice
Great video! I can attest to the run-out on those plastic shafts. Had to upgrade the driveshaft in my Vaterra V100c when I went brushless on that. The shaft would vibrate the whole car, and make a terrible racket bouncing off the rest of the internals. Definitely a must for high power brushless, that is for certain.
Sub'd & Liked!!! Great looking build...
Nice.
Awesome video bud. I just bought one and was wondering if there were upgrades. I always mod my cars. Thanks again!
Ohhh. Good tyres.
Cool, man...
Thanks for watching dude!
I got the Alpine Gt4 and could not for the life of me figure out why some mk2's come with the cover over the esc and receiver and some don't. Thank you for letting me know there is a long wheelbase version. That explains it! Odd that they did not make a cover for the short wheelbase cars though. That cover is visually appealing hiding all the cabling.
Hi how do you extend the wheel base from the 260 to the 274 mm wheelbase thanks
interested in this chassis for an eventual rally build..I wonder if Kyosho sold enough of these to have good parts support
There is plenty of parts support. And lots of aluminum, steel and carbon fiber upgrade parts available through Kyosho
Hi nice upgrades.
I got a r8. In addition to the center shaft, dose the stock motor plate need to be changed for the hobbywing motor.
Thanks in advance for your help.
I was wondering if I can install a module speaker for my RC Dodge charger engine sounds.
When are we gonna see more on this sweet ride......
What is the best cheap brushless drift car for a beginner? Or is there a brushed car that is ok?
Could you share details of the front and rear foam wheels
Does the chassis flex like the hpi rs4 sport 3? I bought one and ran it before I checked the major chassis flex. It’s been sitting on my toolbox for over a year because of that.
What kind of tires were those?
Where did you get the rear wide tires?
Sup bro ✌🏾. Nice video 👍🏾 What brushless system do you have in there? 👊🏾
Its an xr10 pro esc with a g10 4.5t motor. From Hobbywimg
bro what is recommended brushless motor should i buy for fazer mk2?
What is the part # for the Rs8/Acura body? is it FAW209?
Can u do a Mock Mount of the Dodge Charger body,on a Rage chasis with wheels for Aesthetics,like an off road charger.like Fast n Furious
Where can I find the same center drive shift
I love this model it’s like a 4tec on steriods only if they had steel driveshaft cause I know these plastics on a speedrun gonna go any other parts that would fit that or any suggestions
The have aluminum driveshafts....that is also installed on this video. I run them in all my Fazers! 🙏🙏
Fresh Squeezed RC please please please send me a link ? I been on a mission my boys like that model is crap they got no metal parts I’m like anything kyosho make is Awsome and this model I just said dam only if I can get all steel parts to make her bulletproof I think I mean steel cv?
@@angelteamnolimit624 www.kyoshoamerica.com/Option-Parts_c_1670.html
These parts will all fit either wheelbase car except the center shaft. There is a long one or a short one depending on which wheelbase car you're running
I just bought a fazer hellcat i am planning on doing the upgrades in this vid but what motor, servo, and esc are you using bro could u list it... Thanks.
It's a Hobbywing Max10 with a 4400kv motor, stock servo in this one.
Fresh Squeezed RC u da man thanks 👍
Will about any 1/10 scale wheel fit on it? I notice it doesn't have a standard wheel nut.
Any standard wheel fits. Ive run lots of different wheels with no issues at all. Thanks for watching!
I wanna see it go. I like those fatty tires. Wanna see how it handles. I'll assume you're running a 3S battery??
About that driveshaft... I asked you a few months ago about it... After I got it thanks to your response, I installed it. Ran it on my bench and immediately noticed some serious run out at higher speeds.
Like an idiot I ran it full speed anyways just to see how bad it would wobble. It literally lasted 2 seconds before it went full wet noodle. It smacked my lipo hard enough that it left a permanent indentation rendering it unsafe for further use and damaged the ESC case as well.
I was running a HW Max10 with a 4000kv motor on 3S at the time. Needless to say I was thoroughly impressed with the destruction. Kind of Scared me to be honest. Anyways, was wondering if you had any issues like that happen to you. I checked the shaft before installing it and it was straight. So I'm not sure what happened. I ended up bending it all back well enough that I could run it all day on 2S.
I currently have a Frankensteined Slash shaft mounted in there but still scared to run it on 3S. Any thoughts? Lol
I have the destruction on an uploaded vid if your interested in seeing it...
Im sorry that happened. Are you running factory drive cups? Also, if the bearing that supports the rear pinion isnt seated properly it will allow the driveshaft to run out and be damaged.
@@FreshSqueezedRC No worries brother! Not your fault, and I wasn't complaining. Was just curious if you ever had same issue. Saw you last night on Stevos Friday Night Hangouts and reminded me to ask you about it.
I did have the plastic cups at the time it happened. I have since got the metal ones. The bearings and everything were good, so honestly zero idea as to why it happened. The shaft was straight but looked like a bass string when spun at high speed. Then it just bent too far and slapped the chassis and lipo in the process. Just wish I got that moment on video... Wheels were off the ground as well, so maybe having no load could have caused it. Not sure.
Probably going to keep running the Slash shaft for awhile, but definitely run it now at all times with a thick piece of unbreakable body protecting the lipo from possible shaft failures. Still my favorite street car, prefer it over my Infraction since I dont have to replace tires EVERY time I run it. Lol
@@rcworkbench4405 I have had one failure on an aluminum shaft, but is was doing a 4wd 4s burnout so....who knows to be honest. I'm glad that you got it dialed in now. Happy shredding!
Existe t ils des amortisseurs aluminium pour fazer mk2 alpine gt4 kyosho
Merci
Is their ne metal gear upgrades....i stripped my gears lol n want to get all metal
Had the aluminum drive shaft. 5900kv was to much for it. Went with a titanium one and never looked back
I just bought the car posed to be here on the 20th could you send me the link where I can order these parts thanks man doing a great job
I appreciate that a lot! Thank you for watching. The parts will be available through www.kyoshoamerica.com and should be available this month! So keep a lookout!
@@FreshSqueezedRC thank you very much I do appreciate it have a great one
@@ERVIN1931 the parts have arrived!!!
What wheel/tire combo are you running? Looking for better grip setup over stock ones (mind are bald and I’m in the market for replacements). Most I see online are way to narrow or short (not suited for this RC car, they’d look way small).
Get contact foams in 30mm
That’s 30mm front & rear? Or, did you go with the 26mm Contacts for the front? Thanks again? I can’t wait to rip with these tires
Can u race with kyosho Fazer MK2????
hi if i wanna go brushless on this thing 3s what do i need i have no idea
really you just need the upgraded center shaft. which is detailed in the video. the part number is in the description as well. Thanks for watching!!
Is the pinion gear plastic?
Part# KYOFAW210 Kyosho Fazer Mk2 HD Aluminum Center Driveshaft (FZ02L) AMAIN Hobbies
Do anyone know where I can find a aluminum driveshaft for this model ???,😊💯💯💯
Just got a shaft. It bent. My ESC caught on fire. Fun 5 minutes of driving.
This may be a dumb question but I haven’t been into rc very long. Will these parts fit the hell cat and the chevelle?
Yes indeed. 100% they will.
Well I watched the video 3 times and missed where you said it would fit the other cars. Sorry.
@@kodiak404 no worries at all! Thank you for watching!
Dude these upgrade parts seem hard to find, out of stock and really expensive considering the great price the RTR is. Love this platform though.
Well, hang in there. The current situation in the world has supply a little low and slow.
What’s the driveshaft part #
Awesome video....I got the Chevelle and the CHARGER.....what's the part # for the HD driveshaft?
Faw210
I have the Blue Brushless CHARGER...the Orange CHARGER....and the grey Chevelle.....going to upgrade the Orange Charger and the Chevelle.
@@paulpadilla5288 that is the part number you need to upgrade those MK2 chassis cars specifically. So you will be in good shape!
My car has arrived the other day I put my brushless system car runs great very very fast the only problem I have is when they put the decals is too many bubbles I was disappointed in the body
What areas are affected?
@@FreshSqueezedRC mostly around the window area the rest of the car looks great
@@ERVIN1931 I would contact Kyosho customer service. I can assure you that this is out of the ordinary.
@@FreshSqueezedRC oh yeah I understand I wasn't even asking that I was just letting you know about when I receive my merchandise that's all
@@ERVIN1931 no worries at all. I appreciate your feedback for sure.
Which scale is it?
Do anyone now where I can find a aluminum driveshaft at for these????????????? 😊💯
Amain Hobbies but they are out of stock Part# KYOFAW210 Kyosho Fazer Mk2 HD Aluminum Center Driveshaft (FZ02L)
Would these upgraded carbon fiber parts fit the Acura version? I just purchased the Acura
Yep, they sure will!
Got a link to the motor/esc ? Did you just replace stock that’s all ?
And thanks for answering!
Bonjour pourriez vous me donner les coordonnées du fournisseur de pièce faw pour fazer mk2
Cordialement
Can u get them fat tires in rubber
Will it fit the FAZER VEi??
No, these are Fazer MK2 specific
what are you running for a kv motor and gearing?
4400kv and 37t pinion on the stock spur
@@FreshSqueezedRC What are you getting for speeds? and is overheating an issue? sorry to bombard with questions but your unboxing video and running of it helped me purchase this and have been waiting for brushless until some upgrades came out!
@@BP-ds6io I have not put a gps on it but id say with this body and this kv motor it should be well into the 60mph range. It absolutely rips. I have another fazer with a 7200kv I'm hoping to see triple digits with. These hobbywing max10 systems are extremely robust. The esc cools efficiently and the motor seems to do fine as well. I haven't overheated it yet. Although i do watch temps just to be safe. It all depends on how you're driving it really. These parts in the video and more are available right now!
@@FreshSqueezedRC 7200kv that is a turning motor! what gearing are you running in that? and a stock mk2 chassis as well?
@@BP-ds6io its originally the Audi r8 chassis, so it's the shorter wheelbase. But still a stock chassis. Reefs 299lp servo and the aluminum shaft for the swb version. I honestly cant remember the gearing but its maxed out so it may be 37t as well
The best upgrade for this car would be a chassis replacement.
Strongly disagree. Thanks for watching!
@@FreshSqueezedRC Have you raced this vehicle? It's great for bashing and the chassis is strong. So for what you're doing a chassis upgrade isn't necessary and it's fine. But for racing, the weight of this car is very heavy compared to other on road rc cars and the bulk of the weight comes from the chassis. You won't know until you put this on a track.
@@ks-bg5uk i Think that if you are competitively racing, there are better platforms. This car is meant to bash.