#202
Vložit
- čas přidán 15. 05. 2024
- Full Tutorial for Personalised Refillable Resin Pens for the Beginners | Resin Art UK
In this tutorial video, I'm making personalised refillable resin pens. This video is totally beginners friendly and anyone can make them.
Considering to sponsor me so I can make more videos? Here, you can make a small donation to my channel: paypal.me/pouringsomelove
Timestamps for personalised refillable resin pens tutorial for beginners:
00:00 - Intro
01:40 - How to Add Insert in Pen Mold
10:50 - Spraying Isopropyl Alcohol to Avoid Bubbles
11:40 - Pouring mixed Resin
14:00 - Demolding Pens
15:50 - Sticking Vinyl Names
19:40 - Drilling Holes for the Hearts
20:25 - Screwing Eye Screw for Hanging Hearts
24:50 - Adding Clear Coat to Seal Vinyls
27:30 - Assembling Hanging Hearts
32:50 - Pushing Refill in Pen
37:38 - Final Look
Products Details:
Resin Supplies from Amazon: www.amazon.co.uk/shop/pouring...
Resin: amzn.to/3PPiNvC
Or from jdiction.online/
You can use my discount code to save 10% from
jdiction.online/
Discount code: Jigs08
Or discount link
jdiction.online/?ref=emf75pbrd6
Black pigment paste from Helena on Facebook.
Please follow my other social accounts:
Facebook Page: / pouringsomelove
Instagram: / pouringsomelove
This channel occasionally contains affiliate links, which means I receive a small commission on a purchase without additional cost to you if you buy something through my links. If you purchase through my link, thank you so much for your support!!
#personalisedrefillableresinpens
#tutorialforbeginners
#personalisedpen
#resinpentutorialvideo
#resinpentutorial
#resinart
#resinartist
#resinartistuk
#smallbusiness
#smallbusinessuk - Jak na to + styl
❤❤❤ thanks for the guidance
You're welcome 😊
I admire your work and appreciate the time you take to reply to every question . Keep up the good work ❤❤
Thank you so much for your kind words 🙏
thanks for this guidance❤❤❤❤
Thank you for watching 😊💖💖
Brilliant work xx
Thank you 😊
Beautiful..
Thank you 😊
Et Merci pour ce magnifique tuto super ces stylos
Thank you 😊
Thank you so much for your vedio,,,it was just so helpful.... Love from Assam ❤️ India
Thank you for stopping by 😊💖💖
Beautiful, after watching this, I had to have a go even if it was midnight here in Scotland. I just had these moulds delivered this week and found some pens and pastel coloured plastic straws in the cupboard, fingers crossed it works for me 😊
It may need a little practice but don't give up, please. Play around it and have a fun 😉 💖💖
Success with 1 after a bit of tweaking, the resin leaked into the pen end of the other, pity as they do look beautiful & shimmer
Can you tell me what kind of refills you used and where you got them?
They are reffills from BIC Crystal pens. Widely available in all supermarkets and stationery stores.
Nuce job. Do you have a tutorial on how to make mold holder with plastic knives?
Sorry, I don't 😞 Thank you for your comment, though 😊💖
can you tell me how you do the letters and what size and what kind of material it is...thank you, love your work
I use my cricut maker machine to cut vinyls for letterings and silhouettes. They are vinyls with glue on the other side, so easily stick on cured resin and seal with clear resin. Hope this helps!
these are gorgeous, what font and size do you use for the pens please
It's 3.50cm width and 0.70cm height. Thank you 😊
I greet you from Azerbaijan. Please tell me, are the pens disposable? Is it possible to make sure that they are not disposable?
They are reusable.
Beautiful work.
What is the diameter of the straw?
Sorry, for some reason, I missed your comment. I've just seen it now. The diameter is between 0.4 cm and 0.5 cm. It's not exactly either of them. If you have bigger or smaller, it's still works. Before placing straw in mold, put the refill in and heat straw with lighter. Just be careful not to heat too much. Once it's warm up, for smaller hole - push the reffil up to make bigger and for bigger hole - roll between your finger to make it small but make sure you have refill in. After this, take the refill and you place in mold to make refillable resin pens. Hope the explanation helps 😊🙏
can i please ask where you got the moulds the refils and the inserts from please, ive been searching for them today after watching your tutorial the other day and cannot find them anywhere x
I got molds from Aliexpress, straw for for inserts I bought from my local store and refills I use are from normal pens. The one comes in yellow packaging from Asda or Wilko. They sell as 10 in a pack in black, blue and red colours. I'm on holidays right now, so I can't send you a pic of packaging. Send me a message on instagram or on my FB page Pouring Some Love. I'll send you picture of the packaging when I get back from the holidays. Xx
Your pens are beautiful! How can you make the letters without a Cricut?
You can write names using acrylic or posca pens. Let it dry before sealing with a clear layer of resin.
Beautiful. I am still lost as to what kind of paper you used for the lettering
Thank you 😊 On these pens, I have used gold textured vinyl, which I cut on my cricut machine. If you have a cricut or silhouette machine, you'll understand what I meant.
Is there any other way to use lettering other than circuit machine
Also .... are you drilling and putting the eye pin through the blu tack?
Eye pin is drilled through on the side where the resin, not on blue tack.
Brilliant. Straws come in different sizes. What size is the hole please?😊
I have no idea what's the diameter of the hole is. I took my refill pen to compare and luckily, there was one open package so I checked it and it was perfect.
I have explained in the video how you can make a little bigger for the refill head if it's a small hole. Hope it helps!
Do the refills stay in the pen very well? They look very loose.
If you cut the exact size of the mold, they will. When you place them in mold, they are very secure at the top end because of the narrow end, but the bottom has to touch the end properly. The middle one was tiny bit short so I had to push it down. Also be careful around the straw when you try to remove bubbles from the front end, the straw could get moved. I still mess up sometimes. It does need a lot of practice but once you gets used with straw part, it's very easy and fun to make. The wider pen mold ones are very easy to make because the both ends gets secure properly. Square pens are very popular for selling though! Hope this explanation helps! 💖
Please what type of resin is best to use??
I love your work,it's beautiful
I use Jdiction resin 😊💖💖
What mold did u use for the heart?
I have very tiny heart mold from Aliexpress. Thank you 😊
where did you get those straws. I cannot find ones that are small enough here in the states
I'm in the UK. I buy from my local store. I'll make short how to smaller or make bigger holes using heat.
What type of material or how to print names then stick to the resin? Please I am a beginner ❤
I have got a cricut machine, so cut vinyls letter on my machine the size I want. I'll be selling soon on my Etsy shop.
Now that I have the pens, I'm having trouble finding the correct straws. The coffee stirrers are too small and the clear straws that I got from Amazon are a little too big. What straws do you suggest that I get (i.e.: size)? Thanks again.
I'll record a video on how to make holes smaller or bigger when I get a chance. I typed down a long explanation to your comment around 2 weeks ago, but I think I didn't hit the send button. That's why my reply is missing 🤦♀️
Please I await the video too🥺
Does the nib or the plastic tip on the mould go into the b tack?
When I use blue tack in straw, I cut straw little bit more so silicone nib doesn't reach the end of straw and back get covered with resin. When I don't use blue tack in back of straw, I make sure straw cut exact same size of mold so the silicon nib fits inside. When you do second way and back stays open which is visible from the end. Hope you what I meant 😊
@@PouringSomeLove Yes, thank you so much.
What is the font that you used and thank you❤
It's Joseph Sophia
May I ask when can I source the pen inks with those nibs on it?
They are refills from BIC Crystal pens. Widely available in all supermarkets and stationery stores.
Hi from where did you purchased the plastic stick/tube?
May I ask you the link ?
They are normal drinking straws. I bought from local store. When you buy make sure to buy clear ones not the colour ones and not too wide so refill tip can fit. Thank you 😊
I purchased my pen silicone molds with refills and caps from Amazon. The refills are 5.5 inches, but the tip is so much smaller than the straw. You do show that there is a way to make the hole in the straw larger. Is there a way that I can make the hole smaller? What do you suggest?
If you make a hole smaller, still those reffill won't work in straw. Those reffill don't have support on tip which holds them in straw. You have to buy Bic brand pens and take the reffill out from the pens. Bic pens come in different colours.
Thanks so much!
Hi from where can i print the name stickers please answer
I cut them myself on my cricut machine. I'm opening up my Etsy shop this week. I'll list there, too 👍
Hi where to buy those refill pen? 😊
The pens are available in all supermarkets, WH Smith and other stationery storesThey come 10 in yellow packaging. The brand is BIC Cristal Original. Btw, I live in the UK so I got from the UK store. Thank you 😊
Welche Kugeschreiber mienen nimmst du?
Do you mean pen refill? The brand is called Bic Crystal original.
Ja genau die pen refil
Where do we get that pen refiller
I take the refill out from BIC Crystal brand pens and use them.
Please whats the name of the tape you used to remove the names from the paper 🙏🙏🙏🙏🙏
I use transfer tape. I buy from Alison on FB. Sometimes, I use masking tape as well. It also works well. Check my instagram, I have done a short video on masking tape. Hope it helps 🙏
This is the video. I'll post on CZcams as well.
instagram.com/reel/CpQw9eNIp6S/?igshid=MzRlODBiNWFlZA==
@@PouringSomeLove ok thank you very much
Are these straws like ordinary drinking plastic straws ?
Yes, they are. Use the clear straw not the colour ones. Also make sure they are not too wide for refill tip. Thank you 😊
I want this refill link,😢
I buy from stationery stores or supermarkets.
What is the name of the pen that you use to refill
Sorry, I didn't see your comment 🤦♀️ the pens are available in all supermarkets, WH Smith and Wilko and other stationery storesThey come 10 in yellow packaging. The brand is BIC Cristal Original. Thank you 😊
Do you buy the Bic Cristal Pens and pull the stick out of its casing? I ask because the refills have been discontinued.
Yes, get the reffill out from the pens and use it in resin pens.
I truly appreciate your quick responses. I was able to find the Bic Cristal Ballpoint Pens and remove the refill. I'll be working on it this weekend. Thanks so much!
I have a couple of pen molds but they (of course) came with no directions...Thanks for the great guidance!
You're welcome 😊 Thank you for watching 💖
How you made resin
I don't understand what you meant! I buy resin to make resin stuff!
U used 2:1 or 3:1
I use 1:1 epoxy resin for almost everything. I use 2:1 only for deep pour. Thank you 😊
Are you here in USA ?
UK
M