Bro no fucking way in hell… I just discovered your channel last night and in this video you’re detailing this 2006 Hummer. I sold this car to the customer!! And the wheels and wheel Cover on the rear are the giveaway. That’s so wild
Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use czcams.com/users/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
The Hummer needs a “paint correction” to get those specks out. Clay bar only decontaminates the paint. Next step would be some compound & polish. The compound will get the specks out and polish will make it gloss again. Way to take an “L” and keep your head up 💪🏽. Paint corrections can cost $$$$. Next time let them know that clay bar only decontaminations the paint as prep for a polish or paint correction.
Dude was an auto body repair shop. HE KNEW. he said clay and wax bc it was the cheapest and excepted Wayne to get it out for the same price. Can’t stand customers like that, they intentionally hide things about the condition, dog hair, paint etc
It's dying cuz the 12v water pump hooked to the water tank is running the battery down when he is parked and not idling his engine to keep things charged. He needs a separate 12v car battery hooked to the pump with a smaller solar panel charger to keep it charged
Make sure to inspect the vehicle when you arrive if there’s bad areas do a test spot ..make sure you have different grit clay bars and just lube 3 x 2 area to see if you can get it to release if it does then let customer know it’s going to be more $ and may need a one step polish and a wax or sealant after . Keep it up Bro ! Love Reyes and is questioning!
You are an inspiration brotha, not only young black men but to young people today in the our nation. Thank you for pushing the word if you dream it... it can happen!
Love the authenticity of these videos! Puts us right out there in the field with you and for beginners like myself, it really helps. Customer interaction, professionalism, improvisation, etc. love it!
Great job, positive attitude along with awesome customer service. This is business and it happens sometimes, but keep pushing. We seem to have similar ways.
Nice content man I’m actually a detailer myself and even though we may not do the same processes or anything the finish product comes out really nice. I love how there is more than one way to detail a vehicle. Much respect on the grind man keep it up. Just earned a sub
Bad ass channel bro! I'm in the process of starting a mobile detailing business as well to leave my kids once they're older. Used to have a carpet cleaning business but even then I realized mobile detailing was the way to go. Keep up the good content! Definitely motivational.
Man I’m from Houston TX, And I was born in South central LA and really wanted to get my detailing business going. You just put me on game I salute you bro.
Great video man! Love your content it’s helpful for me being I’m about to start up my own detailing and pressure washing company as well. Keep it up man
Love the content, I just got the idea of getting into mobile detailing. Came across your channel, thank god. I can not believe how quickly you legitimized your business, super impressive… best of luck from one father to another 💯
I appreciate how raw this video is with no BS product selling tactics and fake acting. Good problem solver and a great business owner. Love to see it man. I just started my own detailing biz, too. The overspray looks like polish overspray and I think some compound/polisher would help. Paint correction. Clay bar cleans but will not correct. Keep up the hustle 👊🏼👍🏼💯
My man!!!! You handled that situation very well. I love your positive attitude You are going to have and grow a big successful business because you have people skills....dont ever lose that quality. Remember you are the face to your business..real people know when you are being truthful and honest. Keep your word with customers and keep it real. Word of mouth of happy customers is what will build your business. Quality honesty trust....that what is the importance to build your reputation. I hope you earn all the money you want....you work hard...you deserve it
Watched 1 video and now I’m on number 7 keep up the good work. Keep that positive mind set and stay true to you hope you get more blessings going your way much love
I watch video after video of yours they are very helpful I’m gettin a lot of inspiration and I’m becoming more and more interested in becoming my own boss and doing something I would enjoy
Watching like 3 hours straight to your videos ..I just had to subscribe now lol x-) I used to cardetail for AMG_Mercedes-events when i was younger and actually planning on returning to the job. Thanks to my gf actually, she wants to learn how I keep our cars so clean and she wanted to start her own bussiness...what a way to return, got me a free employee! hahaha Putting my construction-bussiness to rest as of today and starting cardetailing once again next week . Don't know about youtube, but I'll watch your channel, loving it! Keep grinding it bro!
This can be easier said than done, a lot of times you can't tell what condition the paint is in before you wash it. But he could ask the customer "What makes you think you need a clay bar treatment?"
If you have a professional eye and experience this could have and would have been avoided. Walk over the vehicle with customer and use ONR on anything suspicious and point it out to them.. When the car is clean things show up the customer never new, a pro sees these things before washing...
@@timj1196 and you claim yourself a pro? Calling it out saying you a pro and would have saw all that before even washing it? That's where you're wrong, and can't always see what's under all the dirt and grime "before washing the vehicle?" .. but I'm sure your "pro eye and 1 subscriber" shows that I guess lol #douchebag
@@dontaclebourn5679I agree because the H2 was sporting a recent detail. It also seems like he had a full day planned with no help. Easy to get caught up when you are in the zone.
I think Reyes and Hunter are good friend. Reyes is always in his videos. Lol they make cool duos. I actually enjoys watching Reyes funny slow motion yet excited tone asking questions oo yea 1 more thing he's funny in his way lolz
Great job Wayne. Stay positive bro. One thing I would suggest is to set the expectation beforehand..before you even start let him know what you will be doing...this you both are on the same page. If he was looking for more than you expected then it could have been dealt with at the beginning. Keep up the grind and husell bro
in the body shop we always start with lacquer thinner on overspray, if its not ours and is old sometimes you have to polish. SHOULDN'T have to wet sand RUPES makes some awesome one step pads and polishes. I have their whole set up its amazing for paint corrections
I also do detailing Nj auto detailing and I’ve used brake cleaner with a soft micro fiber spray it on the towel Amd then lightly rub off paint specs .. WORKS MAGIC
9:56 i hate this kind of costumers, they don’t let you know ahead of time what you’ll be working with because they don’t want to pay full price. But the detailer should of had the experience to test his result on one panel as soon as he saw the overspray paint 11:45 Last time I worked on a car with the similar problem the caranuba paste wax removed the over spray. Also always ask a lot of questions before booking the appointments
@huntersmobiledetailing I was working on a black corvette that had really really bad orange paint overspray. It was so bad the car had an orange tint. I used a real clay bar (not a mitt or anything like that) and it took some elbow grease. But, it came off. Did it in about 2ish hours.
Good job.. I really respect your work ethic. Keep working hard and being a roll model. I saw the videos with your kids working. That's great! Teach them that nobody owes them a living... there is too much of that crap being jammed down our kids throat in this day and age and that is just a failing attitude. Nobody owes you a living and you earn what you got. God bless
Yes you need a heavy grade clay bar to remove the overspray. You will more than likely will need to do a one step polish to remove marring especially on black paint.
Im subscribing because ur real! I only have one thing of advice that is my biggest pet peeve!!! I see he asked you like the mits brush etc... i would NEVERRRRRRR let anyone use a brush on my truck! Only microfiber products like the mits you chose 👍 dont use those brushes! Yes they "softer" but no they arent.. they still leave small swirl marks and thats why im so picky with my detailer choice. My truck is 80k... least i want is a detailer scratchin it with the bristles.... u chose mits but dont let someone choose different! Great job though bro wish u success! P.s the word you were looking for to explain with the clay bar is contaminates💯
Im Really liking how stoked this camera guy is for you and youre success by gritting you're teeth and persevering. It appears you maybe started off with the baisics and worked youre way up which is very admirable. Im really happy for you bro, you're positivety is contagious. As for the spots maybe look for a compound and polish with hi lubricating properties but bcarefull as the panel with spots has lip which will cut into the clear coat more when polishing. I think the spots maybe air bubbles trapped in the clear coat when it was applied by the factory. if so its already been compounded and polished and doing so again wont remove them. Their are paint depth guages that can tell you how much clear coat you have to work with before you hit the colour paint but theyre expensive. But would be really handy for you if were to offer a cut and polish service which will remove most of the swirling on most cars given theirs a safe layer of clearcoat already on the car to work with. Griots complete compound is quite good
That hummer is old as fuck, after it was washed you can clearly see that it really isn't maintained properly. A way I alleviate this issue, is I always ask for the year make and model of the vehicle and last time it received a full detail. After that I quote them a range of what the price can be but I won't know for sure until I inspect the vehicle in person. That hummer obviously needs a new paintjob or pay high ticket for a full paint correction with sealant. I never start working on a vehicle until the customer is given all the information as to what may have to be done on their vehicle and what it may cost them. Cheers :)
Just said this to a customer yesterday this is very true ! Sometimes they won’t be happy but it’s better to charge appropriately especially when working alone.
goof off over spray remover works great just used this on a Mercedes that had white over spray paint all around. took me 15 minutes to do the whole car
Heavy clay is needed to remove some over spray situations like that. But the heavy clay for sure will mar that soft GM black paint, so a polish is all but unavoidable
I had overspray on my car. I started first with a less aggressive approach and used mineral spirits and it did work. My next step was to try bug & tar remover.
Had that done before. Not sure what it's called. But got some liquid like thinner from a body shop that helps with overspray. Works great but you gotta polish the car after cause it leaves the paint a bit dull
Good stuff man. Enjoyed this video. I wish you and your company much success. I just learned how to do paint correction for myself only and just for fun. Yeah that will need compound and polish for sure. But bra he should have told you and that thing was already jacked long before you got to it. You did what you said, so your solid in my book. If I was near you i would come work for you for minimum wage. Retired and would keep me busy.. LOLOL
Good video. Thanks . As far as the paint specks i would try denatured alcohol 1st . It's cheap and can get it about anywhere. It takes road line paint off and we all no that stuff is nasty .
I got over spray off of my Tahoe with Break Parts Cleaner . It tookm about 4 cans to get it off . And of course I had to wax and buff the paint afterwards.
hey man I’m start to follow u couple day ago in this situation I a process that a body shop work they sand with water all the clear coat of the paint the do three step of polish a step one compound step 2 medium polished step three high gloss finished
I usually use paint thinner & spot buff or just wax the area afterwards at the dealership unless its primer overspray . If its primer or something else that's self etching I will wet sand 2,000 & work up to 8,000 grit & high speed buff afterwards..... anyways , you do awesome work !
To remove that paint you can use Dip Dissolver smells like lime but worked wonders on my car when contractors were painting a complex building sprayed paint drips all over my car I tried everything and that solution worked wonders
Bro no fucking way in hell… I just discovered your channel last night and in this video you’re detailing this 2006 Hummer. I sold this car to the customer!! And the wheels and wheel
Cover on the rear are the giveaway. That’s so wild
Wow that’s crazy!! What are the chances
,
@@HuntersMobileDetailing I have the keys to getting it out with no prob.
What the hell happened to the paint?
Hummers are trash vehicles anyways
Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use czcams.com/users/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
I love how the camera man constantly asked questions it’s super helpful
Haha, yeah like its he asks the questions that are in our heads
His name is Reyes He has his own channel
It’s a nice perspective to give the viewers that might not know much about detailing
I like that aspect about Wayne’s videos
@@manuelangulo3992 that one channel entrepreneur something right?
DerTuer
This is definitely REAL. This is the side other detailers on CZcams won’t show. RAW. Subscribed.
Thanks brotha !!
Same
Big facts people don’t show this!
maybe they haven't ran into something like this to show? 🤨😂
@@Renee5 gotta be kidding me🤦🏻♂️ you obviously not a detailer!
Your cameraman is killing it. Asking informative questions and getting good shots aswell. Pretty funny too
Thats Reyes The Entrepreneur MAAAAAAAN
The Hummer needs a “paint correction” to get those specks out. Clay bar only decontaminates the paint. Next step would be some compound & polish. The compound will get the specks out and polish will make it gloss again. Way to take an “L” and keep your head up 💪🏽. Paint corrections can cost $$$$. Next time let them know that clay bar only decontaminations the paint as prep for a polish or paint correction.
🔥nice stuff Carlos thanks 🔥🔥
Dude was an auto body repair shop. HE KNEW. he said clay and wax bc it was the cheapest and excepted Wayne to get it out for the same price. Can’t stand customers like that, they intentionally hide things about the condition, dog hair, paint etc
@@startingtech3900
Exactly!!!
Carlos but seen few CZcams using clay bar before apply wax but agree must before compound or polish.
Great video on the subject
czcams.com/video/1GKX5ipg3OQ/video.html
Integrity, tenacity, along with hustle and game... You sir are going places!
Yes!!!! Thanks 🙏🏾
Looks like dude wanted paint correction for free. Thats at least a 1 step, maybe even a 2 step.
Most definitely a 2 step bc a 1 step wouldn't go deep enough
If your battery keeps dying and considering the amount of accessories you’re running… it may be worth looking into upgrading your alternator.
It's dying cuz the 12v water pump hooked to the water tank is running the battery down when he is parked and not idling his engine to keep things charged. He needs a separate 12v car battery hooked to the pump with a smaller solar panel charger to keep it charged
Make sure to inspect the vehicle when you arrive if there’s bad areas do a test spot ..make sure you have different grit clay bars and just lube 3 x 2 area to see if you can get it to release if it does then let customer know it’s going to be more $ and may need a one step polish and a wax or sealant after . Keep it up Bro ! Love Reyes and is questioning!
You are an inspiration brotha, not only young black men but to young people today in the our nation. Thank you for pushing the word if you dream it... it can happen!
Amen
Thanks brotha
Reyes the entrepreneur always gets to the bottom of things. Great commentary and great video keep up the good work!
Love the authenticity of these videos! Puts us right out there in the field with you and for beginners like myself, it really helps. Customer interaction, professionalism, improvisation, etc. love it!
Thanks brotha
Appreciate you taking us on this ride ✌🏿
Great job, positive attitude along with awesome customer service. This is business and it happens sometimes, but keep pushing. We seem to have similar ways.
I like how you work thru the on site problems… you handled each situation well.
Nice content man I’m actually a detailer myself and even though we may not do the same processes or anything the finish product comes out really nice. I love how there is more than one way to detail a vehicle. Much respect on the grind man keep it up. Just earned a sub
Sky’s the limit bro. Keep ya head up and keep grinding. Respect from NYC.
Reyes behind the camera asking questions makes this one of the more better detailing channels, keep it up !
Bad ass channel bro! I'm in the process of starting a mobile detailing business as well to leave my kids once they're older. Used to have a carpet cleaning business but even then I realized mobile detailing was the way to go. Keep up the good content! Definitely motivational.
Man I’m from Houston TX, And I was born in South central LA and really wanted to get my detailing business going. You just put me on game I salute you bro.
Real talk. Fill up. nothing more frustrating then showing up and not having enough water 💦!!!great content!
Love the hustle, keep grinding young CHAMPION!!
I love your camera man bro 😂🙏🏽 spot on with questions! Keep up your hustle!
Great video man! Love your content it’s helpful for me being I’m about to start up my own detailing and pressure washing company as well. Keep it up man
You have turned this into an art. It's exhausting watching you work. You the man. Making that money.
God bless you! Keep up the hard work! Much love from Elk Grove!!
Appreciate your ethic , your example speaks volumes , wish you success and happiness
I like the way you explain that, ( If you can't make your next appointment on time, they will. ) I like the way you put that. boss talk! 🥊💯
All you talk about are facts bro! Much respect bro! ✌🏼🙏🏼
Im so glad I come across your channel, you got some serious motivation and fantastic content, I really respect that! Blessings from Australia :)
Australia in the building!!! That’s dope much love thanks for your support!!
Love the content, I just got the idea of getting into mobile detailing. Came across your channel, thank god. I can not believe how quickly you legitimized your business, super impressive… best of luck from one father to another 💯
I appreciate how raw this video is with no BS product selling tactics and fake acting. Good problem solver and a great business owner. Love to see it man. I just started my own detailing biz, too. The overspray looks like polish overspray and I think some compound/polisher would help. Paint correction. Clay bar cleans but will not correct.
Keep up the hustle 👊🏼👍🏼💯
Thanks for the kind words !! And the info have a blessed one brotha
This is the best detailer have ever watched..👏👏👏😎
I feel your pain living in the apartment having trouble getting water. People always want their car done when you washing someone’s else.
Great attitude. Just look at it as a learning experience. Any education costs something. Nice work.
Thanks
Honest guy I watched a few of your videos you out there making moves 💪🏾good movement
That was AWSOME man, the real Stuff thank you.
A true and honest businessman
My man!!!! You handled that situation very well. I love your positive attitude
You are going to have and grow a big successful business because you have people skills....dont ever lose that quality. Remember you are the face to your business..real people know when you are being truthful and honest. Keep your word with customers and keep it real. Word of mouth of happy customers is what will build your business. Quality honesty trust....that what is the importance to build your reputation. I hope you earn all the money you want....you work hard...you deserve it
Watched 1 video and now I’m on number 7 keep up the good work. Keep that positive mind set and stay true to you hope you get more blessings going your way much love
Yeah bro I learned this from my paint man 15 years ago. Compound with the buffer and you good family
Definitely can appreciate the real , cause it all ain’t easy breezy all the time . Respect!
Bro as I'm learning I rather be ready for real deal an how to go out it so every one's making out in the end 💯 your a good guy bro..
I watch video after video of yours they are very helpful I’m gettin a lot of inspiration and I’m becoming more and more interested in becoming my own boss and doing something I would enjoy
Watching like 3 hours straight to your videos ..I just had to subscribe now lol x-)
I used to cardetail for AMG_Mercedes-events when i was younger and actually planning on returning to the job.
Thanks to my gf actually, she wants to learn how I keep our cars so clean and she wanted to start her own bussiness...what a way to return, got me a free employee! hahaha
Putting my construction-bussiness to rest as of today and starting cardetailing once again next week .
Don't know about youtube, but I'll watch your channel, loving it!
Keep grinding it bro!
Very professional brother! That’s how you keep good costumers!
Respect ✊🏾 Keep pushing outstanding service is hard to find
Always go over "customer expectations" on site, before you touch it
This can be easier said than done, a lot of times you can't tell what condition the paint is in before you wash it. But he could ask the customer "What makes you think you need a clay bar treatment?"
If you have a professional eye and experience this could have and would have been avoided. Walk over the vehicle with customer and use ONR on anything suspicious and point it out to them.. When the car is clean things show up the customer never new, a pro sees these things before washing...
@@timj1196 and you claim yourself a pro? Calling it out saying you a pro and would have saw all that before even washing it? That's where you're wrong, and can't always see what's under all the dirt and grime "before washing the vehicle?" .. but I'm sure your "pro eye and 1 subscriber" shows that I guess lol #douchebag
@@dontaclebourn5679I agree because the H2 was sporting a recent detail. It also seems like he had a full day planned with no help. Easy to get caught up when you are in the zone.
What works for me is under promise and over deliver. Dont promise the moon if you cant deliver Mars.
You keep a good attitude brother. Very inspiring. Keep going! Shalom
This camera man/commentator has me rolling!! Never change bro! You two make a great team!
Just found out about u guys scrolling youtube and i respect tha hustle majorly 💪🏼
Bro you giving free game I appreciate this so much, completely killing the crab in the barrel mentality. ✅✅🔥 I’m subbing, class in session.
Random video .. for some reason I subscribed, I like this dude personality.
I think Reyes and Hunter are good friend. Reyes is always in his videos. Lol they make cool duos. I actually enjoys watching Reyes funny slow motion yet excited tone asking questions oo yea 1 more thing he's funny in his way lolz
I love ur videos man great work.
Dope ass channel you seem super genuine and hard working !
Thanks !!!!
That’s crazy lmao i was literally thinking in the beginning of the video about the exact water situation you brought up around 4:25
Acetone bro...man I just told you my secrets lol
New sub, love the work man 👌 Love from Fiji.
Great job Wayne. Stay positive bro. One thing I would suggest is to set the expectation beforehand..before you even start let him know what you will be doing...this you both are on the same page. If he was looking for more than you expected then it could have been dealt with at the beginning. Keep up the grind and husell bro
in the body shop we always start with lacquer thinner on overspray, if its not ours and is old sometimes you have to polish. SHOULDN'T have to wet sand RUPES makes some awesome one step pads and polishes. I have their whole set up its amazing for paint corrections
I also do detailing Nj auto detailing and I’ve used brake cleaner with a soft micro fiber spray it on the towel Amd then lightly rub off paint specs .. WORKS MAGIC
9:56 i hate this kind of costumers, they don’t let you know ahead of time what you’ll be working with because they don’t want to pay full price. But the detailer should of had the experience to test his result on one panel as soon as he saw the overspray paint 11:45 Last time I worked on a car with the similar problem the caranuba paste wax removed the over spray. Also always ask a lot of questions before booking the appointments
yessir i had to learn that to. now i ask a ton of questions man
@huntersmobiledetailing I was working on a black corvette that had really really bad orange paint overspray. It was so bad the car had an orange tint. I used a real clay bar (not a mitt or anything like that) and it took some elbow grease. But, it came off. Did it in about 2ish hours.
Good job.. I really respect your work ethic. Keep working hard and being a roll model. I saw the videos with your kids working. That's great! Teach them that nobody owes them a living... there is too much of that crap being jammed down our kids throat in this day and age and that is just a failing attitude. Nobody owes you a living and you earn what you got. God bless
You definitely deserve more subs, keep the great work, new sub here and salutes from Medellín Colombia
Thanks brotha we getting there
Im excited to start
Great content man. Keep up the good work. Subbed!
Yes you need a heavy grade clay bar to remove the overspray. You will more than likely will need to do a one step polish to remove marring especially on black paint.
Im subscribing because ur real! I only have one thing of advice that is my biggest pet peeve!!! I see he asked you like the mits brush etc... i would NEVERRRRRRR let anyone use a brush on my truck! Only microfiber products like the mits you chose 👍 dont use those brushes! Yes they "softer" but no they arent.. they still leave small swirl marks and thats why im so picky with my detailer choice. My truck is 80k... least i want is a detailer scratchin it with the bristles.... u chose mits but dont let someone choose different! Great job though bro wish u success!
P.s the word you were looking for to explain with the clay bar is contaminates💯
Im Really liking how stoked this camera guy is for you and youre success by gritting you're teeth and persevering. It appears you maybe started off with the baisics and worked youre way up which is very admirable. Im really happy for you bro, you're positivety is contagious. As for the spots maybe look for a compound and polish with hi lubricating properties but bcarefull as the panel with spots has lip which will cut into the clear coat more when polishing. I think the spots maybe air bubbles trapped in the clear coat when it was applied by the factory. if so its already been compounded and polished and doing so again wont remove them. Their are paint depth guages that can tell you how much clear coat you have to work with before you hit the colour paint but theyre expensive. But would be really handy for you if were to offer a cut and polish service which will remove most of the swirling on most cars given theirs a safe layer of clearcoat already on the car to work with. Griots complete compound is quite good
That hummer is old as fuck, after it was washed you can clearly see that it really isn't maintained properly. A way I alleviate this issue, is I always ask for the year make and model of the vehicle and last time it received a full detail. After that I quote them a range of what the price can be but I won't know for sure until I inspect the vehicle in person. That hummer obviously needs a new paintjob or pay high ticket for a full paint correction with sealant. I never start working on a vehicle until the customer is given all the information as to what may have to be done on their vehicle and what it may cost them. Cheers :)
Just said this to a customer yesterday this is very true ! Sometimes they won’t be happy but it’s better to charge appropriately especially when working alone.
great advice! you can clearly see all the swirls and everything at the end of the video. Needs lot's of work
I respect you G real shit... This was a great video too show you the real
goof off over spray remover works great just used this on a Mercedes that had white over spray paint all around. took me 15 minutes to do the whole car
Nice i got some appreciate it
Just subscribed bro.. it’s 5am where I’m at rn n just watching ur videos is making me want to go outside and wash my car lol
Come on 🔥
Heavy clay is needed to remove some over spray situations like that. But the heavy clay for sure will mar that soft GM black paint, so a polish is all but unavoidable
I highly agree
GM usually have hard ass paint.
@@Samuelfish2k modern GM black paint is very soft.
This 👍
For sure
Did yah thing bro continue growing and learning
Wassup bro i love your videos true facts im inspire by you keep hard work 🙏
Mineral spirits fam. Been using it for a long time and it is gentle on the clear. Can't do it in full sun though you will need a tent.
The yellow griots garage tacky clay bars get what those synthetic mitts can't. they are amazing
I had overspray on my car. I started first with a less aggressive approach and used mineral spirits and it did work. My next step was to try bug & tar remover.
Had that done before. Not sure what it's called. But got some liquid like thinner from a body shop that helps with overspray. Works great but you gotta polish the car after cause it leaves the paint a bit dull
Good stuff man. Enjoyed this video. I wish you and your company much success. I just learned how to do paint correction for myself only and just for fun. Yeah that will need compound and polish for sure. But bra he should have told you and that thing was already jacked long before you got to it. You did what you said, so your solid in my book. If I was near you i would come work for you for minimum wage. Retired and would keep me busy.. LOLOL
I'm late but a Compound & Polish will definitely do it!
Good video. Thanks . As far as the paint specks i would try denatured alcohol 1st . It's cheap and can get it about anywhere. It takes road line paint off and we all no that stuff is nasty .
Passed you up the other day in antelope after a detail we did in the morning, good to see other good detailers out here.
Thanks brotha! What’s the name of your company ?
@@HuntersMobileDetailing E & M Detailing! Just hit our year in the detailing world.
@@mattcornejo9031 dope maby one day we can link up and knock some cars out! Be safe out there in this heat 🔥🔥
@@HuntersMobileDetailing Sounds good bro!
With overspray if you use a watered down acetone solution. If it’s bad use it with a clay mitt too
But aye brother good shit!! Keep killin the game and hustlin. Your inspiring bro
I got over spray off of my Tahoe with Break Parts Cleaner . It tookm about 4 cans to get it off . And of course I had to wax and buff the paint afterwards.
hey man I’m start to follow u couple day ago in this situation I a process that a body shop work they sand with water all the clear coat of the paint the do three step of polish a step one compound step 2 medium polished step three high gloss finished
I used the old school clay bar to get rid of overspray . Followed by a compound for the harsher over spray .
The elote brush. 😂😂
Video was funny and informative. You need to invest in a pop up tent.
I usually use paint thinner & spot buff or just wax the area afterwards at the dealership unless its primer overspray . If its primer or something else that's self etching I will wet sand 2,000 & work up to 8,000 grit & high speed buff afterwards..... anyways , you do awesome work !
you will have to wet sand the vehicle.
basically a 3 step paint correction
I used to work at a paint shop and they used a lot of thinner to take of over spray quick wipe
I used lacquer thinner and plumbers putty from home depot to remove overspray.
Citrole 666 and 3D1 has a great polish compound combo.So chemical decontamination and 3D1✊
To remove that paint you can use Dip Dissolver smells like lime but worked wonders on my car when contractors were painting a complex building sprayed paint drips all over my car I tried everything and that solution worked wonders
Hunter you are truly an inspiration and a God send did you ever figure out what it was? Looks like overspray?