Ankle Fractures and the Syndesmosis - Everything You Need To Know - Dr. Nabil Ebraheim
Vložit
- čas přidán 8. 09. 2016
- Dr. Ebraheim’s educational animated video describing fractures of the ankle fractures - syndesmotic injury.
how do we know if we have a syndesmotic injury? By getting the intra-operative stress exam, external rotation of the talus within the ankle mortise, this test determine if syndesmotic instability is present, you will do that test after fixation of the other fractures.
The abduction external rotation of the talus will try to displace fibula from the incisura fibularis, the talus will move laterally and displaces the fibula.
The ankle will show a valgus talar tilt or increase in the medial clear space.
Before you do syndesmotic reduction and fixation, it is important to restore the length and rotation of the fibula.
When instability is present, you have to do syndesmotic screw fixation.
How do you know if there is instability? Always have a high index of suspicion.
Syndesmotic fixation is more required when the fibular fracture is high and there is a deltoid ligament injury.
Be skeptical about some of the statements such as fixation is not typically required when the fibular fracture is within 4.5 cm from the joint because that is not true.
Just remember: Weber C is commonly associated with syndesmotic injury.
So we get the stress views and look at certain measurements to determine if the syndesmosis is injured or not.
At 1 cm above the joint we will measure the tibulofibular overlap which will be decreased if there is a syndesmotic injury.
We also measure the tibiofibular clear space which will be more than 5 mm if there is a syndesmotic injury.
Then we look at the medial clear space which will be increased, normally it should be less than 4 mm.
Some people believe that the instability of the ankle appears more in the AP plain.
The medial clear space can be increased preoperatively due to injury to the deltoid ligament.
This is used to differentiate between supination - external rotation stage II and stage IV injuries.
The medial clear space can be helpful intraoperatively after fixation of the fibula to diagnose syndesmotic injury on stress view radiographs.
Syndesmosis fixation techniques:
- You must restore the length and rotation of the fibula, which is not good enough by itself.
- An Accurate reduction of the syndesmosis is required and direct inspection of the syndesmotic reduction is helpful, and this should be supported by x-rays.
- Check for widening.
- Check for the chenton’s line, dime sign, and that will be done after reduction and after using the reduction clamp.
- This is the time to get an AP view and lateral view radiographs, and you assess before you place your screws.
Try to use multiple techniques to check on the syndesmosis injury, one of them is the external rotation view the intraoperative one.
The other one is the cotton test, get a hook and pull on the fibula and see the movement.
The third one is direct inspection of the syndesmosis, make sure the crural fascia may be intact and covering a major syndesmotic injury.
After that we go to the technique:
1- You dorsiflex the ankle.
2- Directly inspect and reduce the fibula.
3- Use reduction clamp.
4- Get x-rays to prove that the syndesmosis is reduced and then you put the screws, about 2-4 cm above the joint, with an angle of 20° to 30° posteriorly to anteriorly.
Do not use lag screws and do not over compress the syndesmosis with the position of the talus in planter flexion, although a lot of people think it is not possible.
Screws are really controversial ad no consensus about them.
But there are a few important points about the screws:
1- The 4.5 mm are not used a lot nowadays.
2- When the widening is bad you are going to use more screws and more cortices, the more the better.
3- When you put the screws proximally and you don’t aim anteriorly you may miss the tibia.
4- Make sure when you go from cortex 1 to 2 and 3 in the tibia that you don’t miss cortex number 3 in the tibia.
5- Try to elevate the ankle a little bit so your hand will be allowed to do some anterior direction of the screws, so the screws will be angled a little bit.
6- Occasionally I cross the screws, so will be one direct straight forward and the other one will be oblique.
7- Screw removal: it’s controversial but you will not remove the screws before 3 months.
What are the problems with the syndesmosis?
• Missing the injury: Reading the x-ray, I use the 5 mm for reading the x-rays, whatever it is in the medial clear space or tibiofibular clear space as my mark, 5 mm is abnormal.
• Malreduction of the syndesmosis: I want to make sure the fibula is anatomically reduced to the incisura before inserting the syndesmotic screws; I want to make sure and get an x-ray to check the talus both in the AP and lateral planes.
Dr. Ebraheim is an orthopedic surgeon at the University of Toledo Medical Center.
Thank you
Very well done
it was helpful. thank you
My son broke his Fibula that requires a plate and they are also going to do the tight rope procedure on his ankle. He an athlete with hopes to play college in 2 years. The Doc says about 6 months of recovery, it's going to be tough for him to sit out for 6 months but we will keep him busy. Thanks for posting this video.
how is he now ?
Having ORIF tomorrow pray it is going to be better
does he use biodegradable screws, like other surgeons for syndesmosis repairs
so u only remove syndesmotic screw after 3 months postoperatively ? do u allow your patient to weigh bear before removal of screw ? thank you
Khairul Mohd Khalid did you find this out? I’m in the same boat
I just had this surgery the other day....Maisonneuve fracture.
Had an ankle fracture and screws and plate qere put in but need to ask how long does tissue regain its seld
Plz consult sir i have a bed injurry in tallus and fabulla
where is dr ebraheim located. think i need to see him
Toledo Ohio
Hi there. We are located in Toledo, Ohio at the University of Toledo Medical Center. A phone number to call and schedule is 419.383.3761
I have 2 syndesmotic screws. Do they have to be removed before weight bearing?
I have screws through mine, plus my tibia and a plate and screws up my fibula. I was non weight bearing for about 3 months and then in a boot weight bearing and then in normal shoes. I've lost a ton of dorsiflexion and my physio and surgeon think it's because of the syndesmosis screws as they're stopping me getting a good range of motion back. I'm having them out, but once they're out I'll go straight into a boot again and will be allowed to weight bear immediately.
Hello, I'm having this surgery, coukd you tell me if got to be normal again? Is our ankle ok now?
@@ilsy24 it's fine. Sometimes painful, most times sore, haven't been doing any workout or exercise ever since. Area is still swollen, but I think the ankle is fine.
Where are you based
This is my ankle and it 26 year old ,I'm fractioning my bones in my foot and toe have broken and don't move and curl under now ,,,in the past 10 years my ACL's on both have been tighten 2 on knee 3 on other 1 ,I hand no motion in my foot they say its clubbed from the calcium now I limp.I fail a lot is the hope or help for I'm 52 and getting is so uncomfortable. You would not believe.I ask a doctor if the calcium trough could be shaved and was told that was casmedic.