DMax SQUAREBODY BUILD PT 7!!!

The long awaited Pt. 7 is here! lol lets not get ahead of ourselves, I know there are only a few of you that want to see this but here it is. I have Pt. 8 done and attempting to upload right after this one. Not going to lie, after Pt. 8 it will be a little while before I upload another video on this project, but don't fret, it will come.

[@mr.tomraypaz6085]

I’m happy to see this project continue.

[@j.j.clingman4083]

I’d use a 2” or a 3” disc on an air tool!!! And definitely use a wet rags to help the metal from getting to much heat!! You can also use an air blower from the air compressor and blow on the metal to help keep the metal cool and from warping!!! I definitely love useing the 2” and 3” sanding discs that go onto a air tool!! You can get the air tools in a 90degree 45degree and a straight design!!! I also believe that they make a 1” or a 1”1/2” disc also!! Well hopefully that helps you out some!!!!

[@PeterHatch-mx7zc]

I missed why cut and length the front of bed thks

[@SNOFLOFilms]

The wheel base on the duramax frame is a little too long for the cab and the bed to line up. Had to lengthen the bed so that the tires would line up in the wheel wells, and so that there wouldn’t be a big gap between the bed and the cab.

[@PeterHatch-mx7zc]

@@SNOFLOFilms thks